http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김충환 ( Chung Hwan Kim ),김학철 ( Hak Chul Kim ),김한승 ( Han Seung Kim ),김범수 ( Berm Soo Kim ),안효원 ( Hyo Won Ahn ) 한국물환경학회 2004 한국물환경학회지 Vol.20 No.5
Pilot-scale experiments were performed for the treatment of bank filtrate containing high manganese concentration around 2 ㎎/L using rapid manganese sand filtration to investigate effects of oxidant dose and pH control on the removal efficiency of manganese. For theoretical dose ranges of oxidant (sodium hypochlorite) between 3 and 4 ㎎/L, the manganese concentration of effluent was 0.57 ㎎/L, which corresponded to 72.5% removal and was higher than drinking water quality standards of 0.3 ㎎/L. For excess dose ranges of oxidant between 4 and 8 ㎎/L, the manganese concentration of effluent was reduced to 0.14 ㎎/L, which corresponded to 94.5% removal, but the residual chlorine concentration was over 1.0 ㎎/L. On the other hand, manganese removal efficiency drastically increased up to the value of 98.0%, which is equivalent to the effluent concentration of 0.03 ㎎/L by controling pH to the range between 7 and 8 for the theoretical dose of oxidant. Consequently, these results indicated that appropriate dose of chemicals, such as oxidant and alkali, and continuous monitoring of manganese should be necessary to obtain efficient removal of manganese and to optimize the maintenance of treatment facilities for the treatment of bank filtrate with high concentration of manganese.
김충환(Chung Hwan Kim),이상수(Sang Su Lee),천병희(Byoung Hee Cheon),권민범(Min Bum Kwon) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
This paper presented the possibility of predicting the fractured state based on the fracture noise characteristics of polyurethane foam used as insulation for LNG fuel tanks. Fracture noise was measured through a microphone during the mechanical test process, and the mechanical test performed three-point and four-point bending and single-edge notch bending under various load point conditions. This study obtained the feasibility of condition monitoring using fracture noise based on the measured fracture noise data.