http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
TE<sub>01</sub><sub>δ</sub> 모드 유전체 공진기와 코플래나 웨이브가이드 구조들과의 결합 특성 연구
김종혁,김인석,Kim, Jong-Hyuk,Kim, Ihn S. 한국항행학회 2005 韓國航行學會論文誌 Vol.9 No.2
본 논문에서는 기존 코플래나 웨이브가이드(CPW), 유한접지(FG) CPW, 그리고 접지(G) CPW와 같은 세 종류의 균일단면 구조의 CPW와 $TE_{01{\delta}}$ 모드 유전체공진기(DR : Dielectric Resonator)간의 결합 특성을 연구하고 마이크로스트립과 DR과의 결합과 같은 병렬 공진 특성을 보이는 CPW 와 DR간의 결합회로의 설계 방법을 제안한다. 결합 특성은 DR을 CPW의 접지와 신호선사이의 두 간격 중의 하나의 중심 상에 유전체 지지대(Support)를 이용하여 위치시키고 접지 방향으로 이동하면서 연구되었다. HFSS(High Frequency Structure Simulator : Finite Element Method Commercial Tool)의 시뮬레이션과 측정된 S-파라미터 값은 잘 일치했다. 마지막으로, 위에서 언급한 세 종류의 CPW와 DR과의 결합과 마이크로스트립라인과 DR과의 결합을 무부하 품질계수인 $Q_u$를 이용하여 비교하였다. 비교결과 CPW와 DR과의 결합은 마이크로스트립라인과 DR과의 결합보다 높은 $Q_u$ 값을 나타냈고 그 중에서 GCPW와 DR과의 결합이 가장 높은 $Q_u$를 보여줬다. In this paper, we propose that three uniform coplanar waveguides(CPWs), such as a conventional, finite grounded(FG), and grounded(G) CPWs, can be coupled with a $TE_{01{\delta}}$ mode dielectric resonator(DR) for a parallel resonant characteristic as a microstrip line coupled with the DR. Coupling characteristics have been investigated by placing the DR on a dielectric support above the CPWs and by moving the DR away from the center of a slot of the CPWs to the ground plane. FEM simulation(HFSS) results in terms of S-parameters agree well with measurement results. Finally, unloaded Q values of the DR coupled with the three uniform CPWs are compared with those of the DR coupled with a microstrip line. The comparison shows that the DR coupled with the three CPWs has higher unloaded Qs than that coupled with a microstrip line and that the GCPW case has the highest unloaded Qs.
트랜스포머 알고리즘을 활용한 탄소나노튜브와 플라이애시 혼입 시멘트 복합재료의 압저항 특성 분석
김종혁,방진호,전해민,Jonghyeok Kim,Jinho Bang,Haemin Jeon 한국전산구조공학회 2023 한국전산구조공학회논문집 Vol.36 No.6
본 논문에서는 시멘트에 탄소나노튜브를 혼입하여 전기 전도성을 향상시킨 복합재료의 압저항 특성을 딥러닝 기반 트랜스포머 알고리즘을 적용하여 분석하였다. 훈련 데이터 확보를 위한 실험수행을 병행하였으며, 기존 연구문헌을 참조하여 배합설정, 시편제작, 화학조성 분석, 압저항 성능측정 실험을 수행하였다. 특히 본 연구에서는 탄소나노튜브 혼입 시편뿐 아니라 플라이애시를 바인더 대비 50% 대체한 시편에 대한 제작 및 성능평가를 함께 수행하여, 전도성 시멘트 복합재료의 압저항 특성 향상 가능성을 탐구하였다. 실험결과, 플라이애시 대체 바인더의 경우 보다 안정적인 압저항 특성결과가 관찰되었으며, 측정된 데이터의 80%를 이용하여 트랜스포머 모델을 훈련시키고 나머지 20%를 통해 검증하였다. 해석 결과는 실험적 측정과 대체로 부합하였으며, 평균 절대 오차 및 평균 제곱근 오차는 각각 0.069~0.074와 0.124~0.132을 나타내었다. In this study, the piezoresistive properties of cementitious composites enhanced with carbon nanotubes for improved electrical conductivity were analyzed using a deep learning-based transformer algorithm. Experimental execution was performed in parallel for acquisition of training data. Previous studies on mixture design, specimen fabrication, chemical composition analysis, and piezoresistive performance testing are also reviewed in this paper. Notably, specimens in which fly ash substituted 50% of the binder material were fabricated and evaluated in this study, in addition to carbon nanotube-infused specimens, thereby exploring the potential enhancement of piezoresistive characteristics in conductive cementitious materials. The experimental results showed more stable piezoresistive responses in specimens with fly-ash substituted binder. The transformer model was trained using 80% of the gathered data, with the remaining 20% employed for validation. The analytical outcomes were generally consistent with empirical measurements, yielding an average absolute error and root mean square error between 0.069 to 0.074 and 0.124 to 0.132, respectively.
LPG BLEVE 피해분석 및 안전거리 설정에 관한 연구
김종혁,이병우,김정욱,정승호,Kim, Jonghyuk,Lee, Byeongwoo,Kim, Jungwook,Jung, Seungho 한국안전학회 2020 한국안전학회지 Vol.35 No.6
Boiling Liquid Expanding Vapor Explosion(BLEVE) can cause not only economic damage to the plant but also serious casualties. LPG accidents account for 89.6 percent of all accidents caused by gas leaks in Korea over the past nine years, while casualties from accidents also account for 73 percent of all accidents, according to statistics from the Korea Gas Safety Corporation. In addition, a potential explosion and a fire accident from one LPG storage tank may affect the nearby storage tanks, causing secondary and tertiary damage (domino effect). The safety distance standards for LPG used by LPG workplaces, charging stations, and homes in Korea have become stricter following the explosion of LPG charging stations in Bucheon. The safety distance regulation is divided into regulations based on the distance damage and the risk including frequency. This study suggests two approaches to optimizing the safety distance based on the just consequence and risk including frequencies. Using the Phast 7.2 Risk Assessment software by DNV GL, the explosion overpressure and heat radiation were derived according to the distance caused by BLEVE in the worst-case scenario, and accident and damage probability were derived by considering the probit function and domino effect. In addition, the safety distance between LPG tanks or LPG charging stations was derived to minimize damage effects by utilizing these measures.
김종혁,최지훈,박정우,박종진,박하선,Kim, Jonghyuk,Choi, Jihun,Park, Jungwoo,Park, Jongjin,Park, Hasun 한국자동차안전학회 2022 자동차안전학회지 Vol.14 No.3
Among the various functions of ADAS (Advanced Driver Assistance System), the most important and representative function to the safety of vehicle passengers is AEB (Autonomous Emergency Braking system). In South Korea, laws are in progress from 2022 for making it mandatory for passenger vehicles to be installed. And as AEB-equipped vehicles continues to increase in the future, the demand for accident analysis related to the AEB function is expected to increase in the future. In order to find out the operating limits of AEB, it is necessary to consider the situations exceeding the standards covered by EuroNCAP. Therefore we have performed four experiments in this study, including situations encountered in real-word traffic conditions, i.e., an oblique stop of Global Vehicle Target (GVT) and ADAS sensor failures. These experimental results are expected to be of great help in accurate and reliable accident analysis by considering them when analyzing traffic accidents for ADAS vehicles.
p-Toluenesulfonate를 가진 새로운 코발트(II) 층상 화합물의 합성과 구조 분석
김종혁,이석근,Kim, Chong-Hyeak,Lee, Sueg-Geun 한국분석과학회 2000 분석과학 Vol.13 No.4
The title compound, $[Co(H_2O)_6](CH_3C_6H_4SO_3)_2$, has been prepared and characterized by X-ray crystallography. The crystal structure of the compound demonstrates a layered material constituted by hexaaquacobalt (II) cations and p-toluenesulfonate anions. Geometrical environment of the cobalt atom is octahedrally coordinated by water molecules. The p-toluenesulfonate anions are arranged with the sulfonate groups turned toward opposite side of the layer, alternately. The layered structure is stabilized by the hydrogen bondings between the ligated water molecules and the anionic sulfonate oxygen atoms.
김종혁,배재성,황재혁,Kim, Jong-Hyuk,Bae, Jae-Sung,Hwang, Jai-Hyuk 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.1
Due to the improvement of science technology, the future tank system will have the multi-function for more powerful firing. and the tank, mounted this multi-function, must be lighter to maintain the mobility. Therefore, new brecoil technology would be necessary to reduce the recoil force for lighter platform. The present study covers a FOOB(Fire-Out0-Of-Battery) system that can reduce the recoil force dramatically. The firing sequence of the FOOB system is radically different from that of a conventional system. The gun is latched in out-of-battery position prior to firing. As soon as firing is occurred, the gun is unlatched and accelerated. The forward momentum is imparted to the recoiling parts. This momentum is opposed by the ballistic force imparted by firing and the recoil force and recoil length will be reduced. In this study, the ADAMS simulation has been performed with the scale model of the FIB(Fire-In-Battery) system and the FOOB system. The ADAMS simulation results show that the FOOB system could reduce the operating time and recoil length and the recoil force.