http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이훈구(Hoon-koo Lee),박강훈(Kang-Hun Park),이수주(Soo-Joo Lee),편선호(Seon-Ho Pyeon),김용호(Hoon-koo Lee) 한국철도학회 2014 한국철도학회 학술발표대회논문집 Vol.2014 No.10
연구는 열차 검지시스템을 개발하는 연구를 수행함에 있어 시스템의 안전요구사항을 높이기 위한 RAMS(Reliability, Availability, Maintaninability and Safety)활동의 초기단계부터 폐기에 이르는 절차에 대해 설명하고 각 단계의 업무내용 및 절차 그리고 안전성 평가를 위한 각 기관의 역할에 대해 고찰하는데 있다. In a research study to develop a train detection system performs to enhance your system"s security requirements RAMS (Reliability, Availability, Maintaninability and Safety) a description of the procedure leading to the discard from the initial stage of business activity and the content of each step and process and is used to study the role of each institution for the safety assessment.
구우권(Woo Kwon Koo),이화성(Hwaseong Lee),김용호(Yong Ho Kim),황정연(Jung Yeon Hwang),이동훈(Dong Hoon Lee) 한국정보보호학회 2007 정보보호학회논문지 Vol.17 No.1
무선센서네트워크 환경에서 브로드캐스트 인증은 필수적인 보안 요소이다. 대표적인 브로드캐스트 인증 방식은 키 체인을 사용한 μ-TESLA 이다. 하지만 이 기법은 인증 시간의 지연이 불가피함으로 실시간 처리가 중요한 무선센서네트워크 환경에서 적합하지 않다. 따라서 본 논문에서는 인증 시간의 지연이 없을 뿐 아니라 re-keying 문제가 없는 효율적인 브로드캐스트 인증 기법을 제안하고 이에 대한 안정성 및 효율성을 분석한다. 이 기법은 무선센서네트워크 환경에 실질적 적용이 가능하고 장기적인 네트워크를 구성할 수 있다. A broadcast authentication is important and fundamental consideration for security in wireless sensor networks. Perigg et al suggests μ-TESLA used a key chain. But it is unavoidable the delay of time to authenticate packets. so it is hard to meet the property that most application of sensor are performed in real-time. To cope with these problems we propose an efficient broadcast authentication scheme which has no delay of time and provides re-keying mechanism. we also describe an analysis of security and efficiency for this scheme.
고효율 및 저전압 동작 특성의 Q-band MIMIC HEMT발진기
이문교,안단,이복형,김성찬,임병옥,한효종,채연식,신동훈,김용호,박형무,이진구,Lee, Mun-Kyo,An, Dan,Lee, Bok-Hyung,Kim, Sung-Chan,Lim, Byeong-Ok,Han, Hyo-Jong,Chae, Yeon-Sik,Shin, Dong-Hoon,Kim, Yong-Hoh,Park, Hyung-Moo,Rhee, Jin-Koo 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.4
In this paper, we present the low voltage and high efficiency Q-band MIMIC oscillator using device-level power combined structure. The oscillator was successfully integrated by using 0.1 ${\mu}{\textrm}{m}$ GaAs PHEMTS and the CPW transmission line. We show that the highest efficiency is 19 % with an output power of 2.6 ㏈m at a frequency of 34.56 ㎓. The operating voltage of the oscillator is 2.2 V which is lower voltage than that of previously reported oscillators at Q-band. And the maximum output power of 6.7 ㏈m was obtained at a frequency of 34.56 ㎓. 본 논문에서는 소자 결합 구조를 통해 발진전력이 합쳐지는 회로를 이용한 저전압, 고효율 Q-band MIMIC 발진기를 제안한다. 0.1 ㎛ GaAs PHEMTS와 CPW 전송라인을 사용하여 제안된 구조의 발진기를 성공적으로 집적화하였다. 제작된 발진기는 34.56 ㎓ 주파수에서 2.6 ㏈m의 출력 전력일때 19 %의 높은 효율특성을 가졌다. 이때 회로에 인가된 전압은 2.2 V로 현재까지 Q-band에서 발표된 발진기보다 낮은 구동전압 특성을 얻었다. 또한 최대 출력 전력은 34.56 ㎓ 주파수에서 6.7 ㏈m을 얻었다.