http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용렬,이형용,정도채,Kim, Yonglyoul,Lee, Hyungyong,Chung, Dochai 한국농촌계획학회 2018 농촌계획 Vol.24 No.2
This study analyzed business ecosystems in 4 case regions(Yeongdong, Seocheon, Sunchang, and Hadong) that carry forward the regional $6^{th}$ industrialization. The analysis aimed to draw implications to build a healthy ecosystem for the sustainable development of the regional $6^{th}$ industrialization. As a result of the analysis, 4 districts show different characteristics for their growth stages, and these results provide implications for policy directions for the development of the regional industry. The following basic direction was set for the sustainable regional $6^{th}$ industrialization based on the healthy ecosystem. First, policy support should be differentiated by considering each region's growth stage. Second, to improve the regional innovation capacity, it is needed to lay the foundation continually and strengthen diverse support for it. Third, a stronger and efficient implementation system is necessary for the regional $6^{th}$ industrialization.
중성운반체를 이용한 K<sup>+</sup> 이온선택성 PVC막 전극
김용렬,조경섭,강안수,Kim, Yong-Ryul,Cho, Kyoung-Sub,Kang, An-Soo 한국공업화학회 1998 공업화학 Vol.9 No.5
본 연구에서는 전극전위 분석법을 사용하여 중성운반체로 dibenzo-18-crown-6(D18Cr6)와 valinomycin(Val)을 이용하여 $K^+$ 이온선택성 PVC막 전극의 막과 용액계면에서의 전극특성을 검토하였다. PVC막에서 감응물질(운반체)에 기본전해질의 혼입 (doping)여부, 감응물질의 종류와 함량, 가소제, 막두께 및 이온의 활동도변화에 따른 전극의 기울기, 선형응답범위 한계측정농도 및 방해이온에 따른 선택계수 등 전극특성을 검토하였다. 중성운반체로 D18Cr6, Val을 $K^+$ 이온으로 착체형성하여 사용하였고, 가소제로 dibutylphthalate(DBP), dioctyl sebacate(DOS) 및 dibutyl sebacate(DBS)를, 혼입제인 기본전해질로 potassium tetraphenylborate (KTPB) 및 용매로 THF를 지지체로 PVC를 이용하여 막을 제조하였다. 운반체의 최적 함량은 D18Cr6와 Val의 경우 3.23 wt %이었고, 가소제는 DBP가 가장 적절한 가소제이었다. 막두께에 대한 영향은 최적 막두께 이상에서는 막두께가 얇아질수록 전극특성이 좋아졌으나, 막두께가 이 이하로 얇아지면 운반체의 용출, 막의 강도 등이 작용하여 전극특성이 나빠짐을 알 수 있었다. D18Cr6의 경우 $K^+$ 이온에 대한 혼합용액법에 의한 선택계수 서열은 다음과 같았다: $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$. Electrode characteristics were studied in the interface between sample solutions and $K^+$ ion selective PVC membrane electrodes containing neutral carriers, dibenzo-18-crown-6(D18Cr6) and valinomycin(Val). The effect of doping of base electrolytes, the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, and concentration variation of sample solution on the response characteristics of electrode such as the measured Nernstian slope, the detection limit, the linear response range, and potentiometric selectivity coefficients, were studied. In order to synthesize the membrane D18Cr6 and Val as neutral carriers were used, and complex between the carrier and $K^+$ ions were used as active materials. PVC membrane electrodes were made of plasticizers (DBP, DOS, and DBS), the base electrolyte[potassium tetraphenylborate(KTPB)], and solvent(THF). The chemical structure of carrier D18Cr6 was best for electrode and ideal electrode characteristics were appeared especially in case of doping of TPB. The optimum carrier content was about 3.23 wt % in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the electrode characteristics was improved. But its characteristics were lowered below the optimum membrane thickness because of the elution of carrier, deterioration of membrane strength, etc. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were in the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.
초임계 공정을 이용한 Thin-walled carbon nanotubes (TWNTs)/아민계 에폭시 첨가제의 복합체 제조
김용렬,정현택,Kim, Yong-Ryeol,Jeong, Hyeon-Taek 한국응용과학기술학회 2014 한국응용과학기술학회지 Vol.31 No.3
We have been fabricated Thin-walled carbon nanotubes (TWNTs)/amine epoxy additives composite using Eco-friendly solvent system such as supercritical process and dry mixed process. TWNTs/amine epoxy additives composite has used as a curing agent for urethane based bisphenol A type epoxy resin. The thermo-mechanical property of the epoxy resin cured by TWNTs/amine epoxy additives composite is characterized by dynamic mechanical analysis(DMA) and dispersability of the nanotubes in the epoxy matrix is also confirmed by scanning electron microscope(SEM). As a results, the epoxy resin cured by TWNTs/amine epoxy additives composite with supercritical process shows enhanced dispersability of the TWNTs in the matrix and thermo-mechanical property when compare to dry mixed process. 본 연구에서는, 유기용매를 사용하지 않는 친 환경적인 건식 공정과 초임계 공정을 이용한 Thin-multiwalled carbon nanotube (TWNTs)/아민계 에폭시 첨가제의 복합체 제조에 관하여 연구를 하였다. 제조된 TWNTs/아민계 에폭시 첨가제의 복합체는 우레탄기반의 비스페놀 A 타입의 에폭시 레진의 경화제로 사용하였다. TWNTs/아민계 에폭시 첨가제의 복합체를 경화제로 사용하여 제조된 에폭시 레진의 열적 성질을 Dynamic mechanical analysis (DMA)를 이용하여 분석 하였으며, 메트릭스상의 carbon nanotube의 높은 분산성은 SEM을 통하여 확인 하였다. 그 결과, 초임계 공정을 이용하여 제조된 에폭시 레진의 열적 성질과 매트릭스내의 carbon nanotube 분산성이 건식 공정을 사용 하였을 때 보다 더욱 증가된 결과를 확인 할 수 있었다.
AC 임피던스 분석법을 이용한 K<sup>+</sup> 이온선택성 PVC막 전극 특성
김용렬,안형환,강안수,Kim, Yong-Ryul,An, Hyung-Hwan,Kang, An-Soo 한국공업화학회 1998 공업화학 Vol.9 No.6
본 연구에서는 임피던스 스펙트럼 분석법을 사용하여 중성운반체로 dibenzo-18-crown-6 (D18Cr6)와 valinomycin (Val)을 이용하여 $K^+$이온선택성 PVC막 전극의 막과 용액계면에서의 임피던스 특성을 검토하였다. PVC막에 대한 운반체의 종류와 함량, 가소제, 막두께, 기본전해질의 혼입(doping)여부 및 이온의 농도변화 등을 교류임피던스 분석법을 이용하여 측정하였고, 그 결과를 전극특성과 비교 검토하고 PVC막 전극에서의 전달특성을 규명하였다. 교류 임피던스의 특성을 측정하여 중성운반체로 D18Cr6와 Val을 포함하고 있는 PVC막 전극의 등가회로는 막의 벌크저항과 전기이중층 용량을 포함하는 기하학적용량을 병렬로 하고, 용액저항과 직렬로 구성되는 임피던스의 등가회로임을 확인할 수 있었다. 그러나 저농도 및 저주파수 영역에서 약간의 전하전이저항과 Warburg저항이 나타나 중첩되는 것을 알 수 있었다. $K^+$이온선택성 전극에서 운반체로서 D18Cr6가 Val중 D18Cr6가 기존의 Val보다 전극특성 및 임피던스 특성이 좋았으며 특히 D18Cr6에 기본전해질로 potassium tetraphenylborate (TPB)를 첨가한 경우 이상적인 전극을 제조할 수 있었다. 운반체의 최적 함량은 D18Cr6와 Val의 경우 3.23wt%부근이었고, 가소제는 DBP가 가장 적절하였다. 막두께가 얇아질수록 임피던스 특성이 좋아졌으나, 막두께가 최적 막두께 이하로 얇아지면 전극특성이 나빠짐을 알 수 있었다. D18Cr6의 경우 $K^+$이온에 대한 혼합용액법에 의한 선택계수 서열은 다음과 같았다. $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$. With impedance spectrum measurements, impedance was studied in the interface between sample solutions for $K^+-ion$ selective PVC membrane electrode containing neutral carriers [dibenzo-18-crown-6 (D18Cr6) and valinomycine (Val)]. Response characteristics of electrode were examined by measuring AC impedance spectra that were resulted from the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, doping of base electrolytes, and concentration variation of sample solution. Transport characteristics of PVC membrane electrode were also studied. It was found that the equivalent circuit for the membrane in $K^+$ solution could be expressed by a series combination of solution resistance and a parallel circuit consisting of the bulk resistance and geometric capacitance of the membrane system. But the charge transfer resistance and Warburg resistance were overlapped a little in the low concentration and low frequency ranges. The carrier, D18Cr6 was best for electrode and impedance characteristics, and ideal electrode characteristics were appeared especially in case of doping of the base electrolyte[potassium tetraphenylborate(TPB)]. The optimum carrier content was about 3.23 wt% in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the impedance characteristics was improved, but electrode characteristics were lowered for membrane thickness below the optimum. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.