http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김석창,이병기 한국통신학회 1993 韓國通信學會論文誌 Vol.18 No.8
In this paper, parallel scrambling techniques are considered for practical use in the SDH transmission and the ATM transmission. In the ATM transmission, there are two ways of transmitting ATM cells - the SDH-based and the cell-based - and the corresponding scrambling techniques differ accordingly. For the SDH transmission and the SDH-based ATM transmission, the FSS (frame synchronous scrambling) is applied to the STM frames : while for the cell-based ATM trans-mission, the DSS(distributed sample scrambling) is used on the ATM cell stream. The parallel scrambling techniques are examined for the FSS and the DSS, and applied to achieve the parallel FSSs for use in the SDH and the SDH-based ATM transmission along with the parallel DSS applicable to the cell-based ATM transmission. The resulting(8, 4) PSRG(parallel shift resister generator) and (8, 16) PSRG based parallel scramblings are directly applicable for the STM-1 rate processing of the STM-4 and STM-16 scramblings, respectively. Likewise, the resulting (1, 8)PSRG and double-sampling-double-correction based parallel scrambling techniques can be practically used for a low-rate processing of the SDH-based and the cell-based ATM signal scrambling respectively.
김석창,이병기 대한전자공학회 1994 전자공학회논문지-A Vol.31 No.4
In this paper, we propose the parallel scrambling technique which is applicable in the multibit-interleaved multiplexing environment. For this, we introduce the concept of SSRG (simple shift register generator) and MSRG(modular shift register generator), and investigate their properties. We also introduce the concept of PSRG(parallel shift register generator) - parallel form of shift register generator, and consider realizations of PSRGs based on SSRGs and MSRGs. Finally, we show how to apply PSRGs to the parallel scrambling for the SDH system.
김석창,안건석,박채규,전병선,이종태,박원종 韓國藥用作物學會 2006 한국약용작물학회지 Vol.14 No.4
황금 (Scutellaria baicalensis Gergi)에 함유된 항산화 억제활성 물질을 분리하고 항산화 효과에 대하여 조사한 결과는 다음과 같다. 1. 황금 500g을 100% MeOH로 추출하여 150g의 수율을 얻었으며, 다시 분획하여 Ethyl ether 13.2g과 n-BuOH 10.3g, Water 126.5g을 얻었다. 2. Ethyl ether 분획을 Column chromatography, TLC 및 HPLC를 이용하여 xanthine oxidase 억제활성을 가진 compound I을 분리하였다. 3. 1H-NMR, 13C-NMR, MS spectrometer 등 분광학적 방법을 이용하여 Compound I의 구조를 규명한 결과, flavonoid 물질로서 compound I은 구조식이 3,5,7-trihydroxy-2'-methoxy-flavanone로 확인되었다. Root of Scutellaria baicalensis G. was extracted with methanol and water to give the yield of 30.0% in order to find the antioxidant substance. The extract was fractionated with diethyl ether, n-butanol and water to test the inhibitive activity against xanthine oxidase. Three fractions inhibited the activities of xanthine oxidase by 48.2%, 10.2% and 2.8%, respectively, at the amount of 0.1 μg. A component that exhibited strong inhibition of xanthine oxidase was isolated from diethyl ether fraction (SE Fr.) by silica gel column chromatography and HPLC, and then identified by 1H-NMR, 13C-NMR and MS spectrophotometry. EDA (Electron Donating ability) of the compound was 28.5% at the concentration 100 μg/3 ml. That was identified to be 3,5,7-trihydroxy-2'-methoxyflavanone by spectrophotometric analysis using 1H-NMR, 13C-NMR and Mass spectrophotometry.
석창성,김정표,송성진,김훈모,김재원,김수용,Seok, Chang-Seong,Kim, Jeong-Pyo,Song, Seong-Jin,Kim, Hun-Mo,Kim, Jae-Won,Kim, Su-Yong 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.12
The BI(Ball Indentation) method has a potential to assess the mechanical properties and to replace conventional fracture tests. In this study, the BI test system has been developed to evaluate material properties. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed by the system using four classes of thermally aged specimens. The results of the BI tests were in good agreement with fracture characteristics from a standard fracture test method.
선형 및 비선형 초음파를 이용한 1Cr-1Mo-0.25V의 열화평가에 관한 연구
김정표,석창성,송성진,김영환 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.5
초음파법은 산업설비의 열화 정도나 결함을 평가하기 용이한 비파괴적 방법이다. 본 연구에서는 1Cr-1Mo-0.25V을 630°C에서 등온열화처리하여 4개의 시편을 준비하였다. 이를 사용하여 초음파의 속도, 감쇠계수를 측정하여 재료의 열화를 평가하였으며, 배진동의 발생효률을 나타내는 비선형파라미터를 이용하여 재료의 열화정도를 평가하였다. 감쇠계수와 비선형파라미터는 열화가 진행될수록 증가하였으며, 특히 1,820 시간 열화시편의 배진동 진폭은 원시시편의 배진동 진폭과 비교시 20dB이상 증가하였다. 그러나 열화정도에 따른 속도의 변화는 거의 없는 것으로 나타났다. 본 연구결과에서 감쇠계수와 비손형파라미터는 재질 열화에 민감하게 반응하는 파라미터였으며, 재질 열화도를 평가하기에 적절한 파라미터인 것으로 사료된다. Ultrasonic is a powerful nondestructive technique for getting the information of flaws and material properties of in-services facilities. We prepared 4 different 1Cr-1Mo-0.25V specimens by isothermal aging at 630°C. We evaluated material degradation using ultrasonic parameters, velocity, attenuation and harmonic generation. Attenuation and nonlinear parameter derived from harmonic generation efficiency increased as degradation. Especially the second harmonic of the fundamental wave in the 1,820 h aging material was observed to exceed 20 dB more than that in the un-aged material. But velocity remained virtually the same for all specimens. We concluded that nonlinear parameter and attenuation are sensitive to material degradation, but velocity was not. It'll be a good parameter for evaluating the material degradation.