http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
UPS inverter의 2차 데드비트 응답을 위한 반복부하예측기법
김병진(Byoungjin KIM),최재호(JaeHo CHOI) 전력전자학회 2000 전력전자학술대회 논문집 Vol.2000 No.11
Repetitive Load Prediction is proposed for the UPS inverter application of the second order deadbeat controller which is robust against the calculation time delay and the parameter variation and which gets fast response against the load variation. The proposed technique predicts the load current ahead of two sampling time using that the load current is periodic. This is effective under nonlinear load condition. The proposed technique is derived theoretically and verified through simulation and experimental result.
알칼리화합물과 텅스텐/바나듐산화물의 기계화학반응을 이용한 수 침출 연구
김병진,김수윤,이재령,Kim, Byoungjin,Kim, Suyun,Lee, Jaeryeong 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.4
Water leaching of tungsten(W) and vanadium(V) was researched from their oxides through mechanochemical (MC) reaction with alkali compounds. Intensive grinding for the mixture of tungsten/vanadium oxide and alkali compounds (NaOH, $Na2CO_3$) was carried out with change of their mixing ratios and grinding duration. Water soluble compounds, $Na_2WO_4$ and $NaVO_3$, were synthesized through MC reaction and their solubilities increased in proportion to the mixing ratio of sodium compound and grinding times. Whereas vanadium leachability was less affected by the mixting ratio and grinding times. The leachabilities of 99.0% were accomplished by a short period of MC treatment, W (30 min.) and V (5 min.). This process enable us to extract W and V from their oxides via a water leaching, and can be applied to the selective recovery of W and V from $DeNO_x$ spent catalysts.
블레이드 각속도 통계 정보 기반 풍력 발전기 고장 진단 모니터링 시스템
김병진,강석주,박준영,Kim, Byoungjin,Kang, Suk-Ju,Park, Joon-Young 한국전력공사 2016 KEPCO Journal on electric power and energy Vol.2 No.4
본 논문에서는 풍력 발전 시스템에서 발생 가능한 고장 중 블레이드에 대한 고장 진단 방법으로 자이로 센서를 이용한 각속도 측정을 통해 고장 진단용 모니터링 시스템을 제안한다. 제안하는 방법은 우선 손상이 발생하지 않은 상태의 블레이드 회전에 대한 각속도 dataset을 구성한다. 블레이드 상태 판별을 위한 dataset 구성이 되었다면, 임의의 상태에 대한 블레이드가 부착된 풍력 발전기를 일정한 힘을 가해 회전시킨 후 최종적으로 블레이드의 손상 정도에 따라 발생하는 각속도의 차이를 비교하여 블레이드의 고장 진단에 대해 판단한다. 실험 결과 정상 상태의 블레이드는 초당 1회 (초당 $360^{\circ}$) 이상의 속도로 회전을 진행하며, 손상 상태의 블레이드는 초당 1회 미만의 속도로 회전하며 표준 편차가 급격히 증가하는 것을 확인할 수 있었다. In this paper, we propose a new fault diagnosis monitoring system using gyro sensor-based angular velocity calculation for blades of the wind turbine system. First, the proposed system generates the angular velocity dataset for the rotation speed of the normal blade. Using the dataset, we estimate and evaluate the state of blades for the wind turbine by comparing the current state with the pre-calculated normal state. In the experimental results, the angular velocity of the normal state was higher than $360^{\circ}/s$ while that of the damaged blades was lower than $360^{\circ}/s$ and the standard deviation of the angular velocity was significantly increased.
알칼리 용융 및 수 침출을 이용한 탄화텅스텐으로부터 텅스텐 회수
김병진,김수윤,이재령,Kim, Byoungjin,Kim, Suyun,Lee, Jaeryeong 한국자원리싸이클링학회 2017 資源 리싸이클링 Vol.26 No.6
Tungsten (W) recovery from tungsten carbide (WC) was researched by alkali melt followed by water leaching. The experiments of alkali melt were carried out with the change of the sort of alkali material, heating temperature, and the heating duration. Water leaching of W was performed in the fixed conditions ($25^{\circ}C$, 2 hr., slurry density: 10 g/L). From the mixture of WC and sodium nitrate ($NaNO_3$) in the molar ratio of 1:2, treated at $400^{\circ}C$ for 6 hours, only 63.3% of W might be leached by water leaching. With the increase of sodium hydroxide (NaOH) as a melting additive, the leachability increased. Finally it reached to 97.8 % with the melted mixture of ($WC:NaNO_3:NaOH$) in the ratio of (1:2:2). This imply that NaOH may play a role as a reaction catalyst by lowering Gibb's free energy for alkali melt reaction for WC. 알칼리 용융법과 수 침출을 이용하여 탄화텅스텐(WC)으로부터 텅스텐(W) 회수에 관한 연구를 실시하였다. 알칼리 용융 처리는 알칼리염의 종류, 용융온도 및 용융시간을 변화시키면서 실시하였으며, 수 침출은 $25^{\circ}C$, 2시간 및 슬러리 농도 10 g/L로 고정하여 실시하였다. 알칼리염으로 질산나트륨($NaNO_3$)만 단독으로 사용한 경우, W의 수 침출율은 63.3%이었지만, 용융 첨가제인 수산화나트륨(NaOH) 혼합량이 증가할수록 침출율은 증가하였으며, 몰비 $WC:NaNO_3:NaOH=1:2:2$로 혼합한 용융물에서는 97.8%까지 증가하였다. NaOH는 용융 반응의 반응열 증가로 인한 반응 촉진제 역할을 한 것으로 판단된다.