http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유병기,김혁주,오권영,최광재,이성현,박환중,김병관,Yu B. K,Kim H. J.,Oh K. Y.,Choe K. J.,Lee S. H.,Park H. J.,Kim B. K. 한국축산환경학회 2005 축산시설환경학회지 Vol.11 No.1
1. 구획이 작고 논두렁이 많은 논의 볏짚 수집에 적합한 1축롤 구동 래핑암회전식 트랙터 3점히치 장착형 원형베일 래퍼를 개발하였다. 2. 2개의 구동롤을 구동하는 래핑암 회전식원형베일래퍼는 베일 적재시 베일에 변형이 발생하였으며 작업시 무게중심이 높아 기체 흔들림이 있었으나 시작기는 베일적재시 롤이 수평직선운동을 하여 베일의 변형이 적었으며 무게중심이 낮아 작업 안정성이 다소 높은 것으로 평가되었다. 3. 베일적재시에 두 개의 적재롤이 자유회전을 하여 적재시의 베일과 롤의 마찰저항을 구름저항으로 바꿈으로써 베일의 변형이 생기지 않았으며 베일을 회전시키기 위한 구동롤의 토크를 기존의 2축롤 구동식은 12 kgf-m 이었으나 새로 개발한 1축롤 구동식은 6 kgf-m로 낮았다. 4. 구동롤 토크가 낮아 1축롤 구동으로 베일래핑작업이 가능하였으며 기계구조를 단순화 킬 수 있었다. 5. 기존 회전테이블식에 비해 작업능률을 $45\%$ 향상, 작업비용은 $17\%$ 절감할 수 있었다. The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.
전해도금에 의해 형성된 반도체 고속도금용 주석-납 합금피막의 첨가제 및 전해조건의 영향
정강효(K. H. Jung),김병관(B. K. Kim),박상언(S. U. Park),김만(M. Kim),장도연(D. Y. Chang) 한국표면공학회 2002 한국표면공학회지 Vol.36 No.1
Effects of additives and plating conditions of high speed electroplating were investigated. The Sn content in electrodeposit was highly decreased with increasing current density from 10A/d㎡ to 50A/d㎡, and the current efficiency on the cathode was decreased. The carbon content in the electrodeposit was decreased with increasing current density from 10A/d㎡ to 30A/d㎡, however the carbon content was highly increased in the range of 40A/d㎡~50A/d㎡. The formation of tetravalent tin and stannic oxide sludge was prevented by the addition of gallic acid in the bath. The changing of Sn content in the electrodeposit is caused by the addition of gallic acid.
곽지현,김병관,김경환,김지현,Kwag, J.H.,Kim, B.G.,Kim, K.H.,Kim, C.H. 대한의용생체공학회 2009 의공학회지 Vol.30 No.1
Bone remodeling is a continuous process of skeletal renewal during which bone formation is tightly coupled to bone resorption. Mechanical loading is an important regulator of bone formation and resorption. In recent studies, neurotransmitters such as vasoactive intestinal peptide (VIP) were found to be present inside bone tissue and have been suggested to potentially regulate bone remodeling. In this study, our objective was to use a pre-established in vitro oscillatory fluid flow-induced shear stress mechanical loading system to quantify the effect of VIP on bone resorptive activity and investigate its combined effect with mechanical loading. VIP decreased osteoclastogenesis significantly decreased RANKL/OPG mRNA ration by approximately 90%. Combined VIP and mechanical loading further decreased RANKL/OPG ratio to approximately 95%. These results suggest that VIP present in bone tissue may synergistically act with mechanical loading to regulate bone remodeling via suppression of bone resorptive activities.
유비쿼터스 시대를 대비한 주파수 공유 기술의 발전방향 및 시사점
박광만,여재현,김병관,이광희,Park, G.M.,Yeo, J.,Kim, B.K.,Lee, K.H. 한국전자통신연구원 2006 전자통신동향분석 Vol.21 No.2
전파를 이용한 서비스가 사회전반에서 이용되고 관련 기술들이 발전함에 따라 유비쿼터스 사회의 도래를 기대할 수 있게 되었다. 유비쿼터스 사회에서는 인간의 제반활동이 통신 인프라를 기반으로 제공될 것이며, 이의 기반이 되는 주파수에 대한 수요가 급격하게 증가하게 된다. 그러나 주파수 자원은 활용가능성 측면에서 희소자원으로 인식되고 있어 적기, 적소에 적절한 양의 주파수를 공급하는 것이 매우 어려운 과제가 되고있다. 이러한 주파수 부족현상을 기술적인 측면에서 타개하고자 주파수 공유기술의 개발이 활발히 이루어지고 있는데, 주파수 공유기술이 적용되어 효과를 발휘하기 위해서는 제도적 기반이 마련되어야 한다. 본 연구에서는 주파수 공유기술의 발전 방향을 서술하고, 주요국의 주파수 정책에 대해 살펴봄으로써 국내 전파정책수립에 필요한 시사점을 도출하고자 한다.