http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김명진,최덕일,장준기,이재운,Kim, M.J.,Choi, D.I.,Chang, C.K.,Lee, J.W. 한국환경영향평가학회 1993 환경영향평가 Vol.2 No.1
We live in an age of information and an era of rising environmental awareness. As a result, efficient and judicious use of environmental information has become a prerequisite to planning and management of environmental affairs in contemporary societies. So, we have embarked on a study of Environmental Information System(EIS). In the first article, we discussed the status analysis of EIS in Korea, USA, and Japan. This study as the second project has three major components. First, it classifies items and sources of 22 EIA factors. Second, it explains building of environmental information comprising geographic and attribute data of 17 factors. Finally, the study presents applications of EIS as an alternative assessment of suitability analysis. Based on these analysis, the study makes some recommendations and conclusions.
김명진(M J Kim),한준희(J H Han) 한국정보과학회 1990 한국정보과학회 학술발표논문집 Vol.17 No.2
2차원 물체 인식에 관한 연구는 물체 표출 방식과 더불어 많이 연구 되어 왔다. 본 논문에서는 2차원 물체 외각 경계선의 오목, 볼록, 혹은 불연속점의 특성을 이용한 물체 표출 방식을 제시하고, 모델을 기반으로 회전, 이동, 확대, 축소 그리고 겹침에 포용성을 가지는 계층적 세그먼트 인식(정합) 방법을 서술하려 한다.
최만호(M. H. Choi),정상수(S. S. Jeong),김효윤(H. Y. Kim),김명진(M. J. Kim),이해철(H. C. Lee),한영진(Y. J. Han),최우천(W. C. Choi) 한국진공학회(ASCT) 1993 Applied Science and Convergence Technology Vol.2 No.3
본 논문은 포항가속기에서 건설 중인 진공 chamber의 용접에 관한 것이다. 저장링에 전자빔을 5시간 이상 저장하기 위하여 10^(-10)torr 이하로 진공도를 유지하도록 설계되어 있기 때문에 초고진공에 적합한 TIG 용접(tungsten inert gas welding)을 하였다. 진공 chamber는 Al 5083-H321이며 flange의 재질은 Al 2219-T852이다. Sector chamber Ⅰ, Ⅱ의 총 용접 길이는 각각 27m, 37m이며 진공에 유해한 균열과 virtual leak가 생기지 않도록 하는 용접조건 등을 선정하였다. In order to maintain a beam life time of more than 5 hours, the PLS vacuum chamber should be in the pressure of 10^(-10)torr. Thus welding of The PLS chambers should be free of cracks and virtual leaks. Important things related to chamber closed welding and Al-flange welding and described such as welding preparation, welding condition, leak test and welding repair.
한영진(Y. J. Han),최만호(M. H. Choi),김명진(M. J. Kim),이해철(H. C. Lee),김효윤(H. Y. Kim),최우천(W. C. Choi) 한국진공학회(ASCT) 1994 Applied Science and Convergence Technology Vol.3 No.4
설계변경된 sector 챔버를 제작하고, 저장링 챔버로서 성능을 알기 위하여 각종 진공실험을 하였다. 가스방출률은 낮은 10^(-13) Torr.1/sec/㎠이고 누설률은 1×10^(-10) Torr.1/sec이하이며 2회 bakeout과 NEG활성화후 얻어진 최종진공도는 낮은 10^(-11) Torr이었다. 이러한 결과는 저장링 sector챔버의 진공요구조건을 충분히 만족시킨다. A sector chamber refined design has been fabricated and tested vacuum in order to examine performance of sector chamber of storage ring. The outgassing rate is low 10^(-13) Torr. l/sec/㎠. The leak rate is less than 1×10^(-10)Torr.l/sec and the ultimate pressure is achieved low 10^(-11) Torr after twice bakeout and NEG activation. These results satisfy the terms desired of vacuum for the PLS storage ring chamber.