http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공적급여 보조기구 전달체계에서 전문보조기구센터의 실효성 연구
한승호(S. H. Han),오수진(S. J. Oh),장완호(W. H. Jang),황준길(J. G. Hwang),김권영(K. Y. Kim) 한국재활복지공학회 2012 한국재활복지공학회 학술대회논문집 Vol.2012 No.11
본 연구에서는 공적급여 보조기구 전달체계에서 전문보조기구센터가 개입함으로써 실제로 효과성이 있는지를 장애인보조기구 교부사업을 중심으로 검증하고자 하였다. 1년간 광주광역시에 장애인보조 기구 교부사업 신청자 253명을 대상으로 상담, 평가 과정을 진행하여 적합 197명, 부적합 29명, 품목 변경 27명의 결과를 도출하였다. 전문보조기구센터 개입 전에는 신청자 253명이 모두 지원을 받을 수 있었지만 개입 후에는 27명이 자신에게 맞는 보조기구를 변경하여 지원을 받을 수 있게 되었고 29명 에게는 불필요한 지원을 피하게 되어 또 다른 사람에게 지원받을 수 있는 기회가 주어졌다.
한승호(S. H. Han),강성보(S. B. Kang),신병천(B. C. Shin) 대한기계학회 2001 대한기계학회 춘추학술대회 Vol.2001 No.8
It is well know that the strength and the life of welded components are affected extensively by the residual stresses distributed around their weldments not only under static loads, but also fatigue loads. The residual stress can be superimposed with externally applied loads, so that unexpected deformations and failures of members will be occurred. These residual stresses are not kept constant, but relaxed or redistributed during in service. Under static loads the relaxation takes place when the external stress superimposed with the residual stress exceeds locally the yield stress of material used. It is shown that under fatigue loads the residual stress is considerably relieved by the first or few cycle loading, and then gradually relaxed with increasing loading cycles. In this study the phenomenon and mechanism of the stress relaxation by mechanical means were investigated and a model to predict quantitatively the residual stress relaxation for the case of static and fatigue loading condition was proposed.
유량 제어용 Cylinder-in-Ball 타입 밸브의 형상개념설계 및 유동해석을 통한 성능평가
한승호(S. H. Han),고한별(H. B. Ko),강효림(H. L. Kang),박형준(H. J. Park),정호(H. Jeong),최해룡(H. L. Chol) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
제어 밸브는 다양한 공정라인에서 유량과 압력을 정교하게 조절하는 목적으로 다양하게 활용되고 있다. 그중 제어 밸브의 고유유량 특성에서 밸브의 개도율에 따라 등비율 특성을 갖는 글로브 밸브는 개폐가 신속하고 유량조절이 정교해 광범위하게 사용되고 있다. 그러나 글로브 밸브의 경우 유로의 변화가 심한 단점을 갖고 있어, 유로와 구조가 단순한 볼 밸브가 제어밸브로 주목받고 있다. 볼 밸브는 개도가 유로의 측면에서 시작되어 유동 및 유속이 급격하게 변화하며 와류와 공동현상 등이 발생한다. 본 연구에서는 볼 안에 실린더가 삽입된 Cylinder-in-Ball 타입 밸브를 제안하여 개도 시 유로가 중앙에서 시작할 수 있도록 하였다. 또한 유동해석을 수행하여 밸브의 성능을 평가하였다. 해석 결과 밸브의 20%, 50% 및 100% 개방에서 유량계수가 1.05, 10.95 및 110.50 으로 나타났으며, 개방이 커질수록 유량계수가 지수함수적으로 증가하여 등비율의 고유유량특성을 갖는 것을 확인하였다. 아울러 기존의 V-Port 볼 밸브와의 유량계수 비교를 통해 제어 밸브로서 적합함을 검증하였다. The control valve is used for precisely controlling the flow rate and pressure in various process lines. Among the control valves, globe valve is widely used because it allows quick opening and closing and precise flow control. The globe valve has inherent flow characteristics such as an equal percentage of flow coefficient that are found in typical control valve. However, during operation, the flow path changes rapidly due to the complex internal structure of the valve, which can cause severe vortex and cavitation. For this reason, the use of ball valves with a relatively simple internal structure and flow path as control valves is increasing. When the opening angle is small, however, the opening starts at the side of flow path so that the flow changes severely, and the vortex, vibration and cavitation can occur. In the present study, a Cylinder-in-Ball type valve was proposed, which was capable opening starts at the center of flow path. This valve was implemented by using the outer ball and inner cylinder rotating in opposite directions. The CFD analysis was carried out to evaluate the flow performance, in which the flow coefficient C<sub>v</sub> at the opening ratio of 20%, 50% and 100% were estimated as 1.05, 10.95 and 110.50, respectively. The opening rate of the Cylinder-in-Ball valve increased, and then the C<sub>v</sub> increased exponentially. These showed that the Cylinder-in-Ball valve provided equal percentage inherent flow characteristics. In addition, the comparison of experimental results obtained from a commercially used V-port ball valve provided that the Cylinder-in-Ball type valve can be available for the purpose of precise flow control.
한승호(S. H. Han),황준길(J. K. Hwang),김권영(K. Y. Kim) 한국재활복지공학회 2011 한국재활복지공학회 학술대회논문집 Vol.2011 No.11
본 사례연구에서는 Hunter 증후군으로 자세가 불안정한 대상자에게 자세유지기구를 적용하였다. 맞춤형으로 제작된 자세유지기구는 하지 및 척추의 추가적인 관절 구축을 예방할 수 있으며, 편안한 호흡과 유지된 자세의 안락감을 주고, 보호자의 관리가 용이하게 되었다.