전극용 Ag Paste의 Cellulose Acetate Propionate(CAP) 개질에 따른 태양전지 효율 향상

김동민,임종찬,김진현,차상호,이종찬,Kim, Dong Min,Lim, Jong Chan,Kim, Jin Hyun,Cha, Sang-Ho,Lee, Jong-Chan 한국재료학회 2018 한국재료학회지 Vol.28 No.4

We investigate the effect of the modification of cellulose acetate propionate as an organic vehicle for silver paste on solar cell efficiency. For the modification of cellulose acetate propionate, poly(ethylene glycol) is introduced to the hydroxyl groups of a cellulose acetate propionate backbone via esterification reaction. The chemical structure and composition of poly(ethylene glycol) functionalized cellulose acetate propionate is characterized by Attenuated total reflectance Fourier transform infrared, $^1H$ nuclear magnetic resonance, differential scanning calorimetry and thermogravimetric analysis. Due to the effect of structural change for poly(ethylene glycol) functionalized cellulose acetate propionate on the viscosity of silver paste, the solar cell efficiency increases from 18.524 % to 18.652 %. In addition, when ethylene carbonate, which has a structure similar to poly(ethylene glycol), is introduced to cellulose acetate propionate via ring opening polymerization, we find that the efficiency of the solar cell increases from 18.524 % to 18.622 %.

CCTV 영상에서 참조 영상을 이용한 자동차 번호판 인식률 제고

김동민,장상식,윤인혜,백준기,Kim, Dongmin,Jang, Sangsik,Yoon, Inhye,Paik, Joonki 대한전자공학회 2012 전자공학회논문지 Vol.50 No.8

본 논문에서는 저해상도, 저조도, 기하학적 왜곡 등과 같은 열화 요인에 의해서 식별이 불가능한 차량 번호판 분석 방법을 제안한다. 기존 차량 번호판 인식기술은 열화 요인을 제거하는 전처리 과정에서 영상을 식별 가능한 상태로 개선하지 못하는 경우 번호판의 인식이 불가능하였다. 제안된 방법은 전처리 과정에서 번호판 영상이 식별 가능한 상태로 개선되지 못하더라도, 미리 저장된 참조 번호 영상을 입력 영상과 동일하게 왜곡시킨 후, 통계적 방법으로 유사도를 추정하여 번호 인식을 가능하게 한다. 제안된 기술은 불완전한 조명 환경, 육안으로 식별이 불가능할 정도의 저해상도 영상에서도 용의 차량의 번호 인식을 가능하게 한다. 제안된 기술은 실제 범죄 용의 차량의 번호판을 인식하여 실제 검거에 사용이 되었고, 다양한 환경에서 실험을 통하여 범죄 증거를 입증하는데 사용할 수 있음을 확인하였다. This paper proposes a method of analyzing unrecognizable numbers of license plate images, which are degraded by various factors such as low resolution, low light level, geometric distortion, and periodic noise, to name a few. With existing vehicle license plate recognition methods, it is difficult to recognize license plate if images are not recognizable in the pre-process of removing degradation factors. Although images of license plate have not been improved to be recognizable in the pre-process, the proposed method makes it possible to recognize numbers of license by distorting pre-saved reference images of license plate numbers same as sample plates, and by assuming likelihood ratio using statistical methods. The proposed method also makes it possible to identify suspect vehicle license plate under unstable light conditions and with low resolution images that are unrecognizable by the naked eye. This method has been used in real criminal investigation to recognize numbers of license plate of criminal vehicle, and has proved to be useful as criminal evidence through experiments under various conditions.

금강 백제보 구간 수온성층 형성과 임계유속 관계

김동민,박형석,정세웅,Kim, Dong-min,Park, Hyung-Seok,Chung, Se-Woong 한국물환경학회 2017 한국물환경학회지 Vol.33 No.4

In Geum River of Korea, three multi-purpose weirs were built at the downstream of Daecheong Reservoir during the Four Major River Restoration Project (FMRRP). The weirs have altered the hydraulic characteristics of the river, and consequently transformed the large areas of flowing ecosystem to deep and wide stagnant environment. In every summer, a thermal stratification occurred near the Baekje Weir having mean depth of 4.0 m, and the surface algal blooms dominated by buoyant cyanobacteria have been frequently formed after the FMRRP. The objective of this study was to investigate the relationship between flow velocity and thermal stability of the waterbody using a three-dimensional (3D) hydrodynamic model (EFDC+) after calibration against the thermistor chain data obtained in 2014. A new Sigma-Zed vertical grid system of EFDC+ that minimize the pressure gradient errors was used to better simulate the thermodynamics of the waterbody. The model reasonably simulated the vertical profiles of the observed water temperatures. The vertical mean flow velocity and the Richardson Number (Ri) that represents the stability of waterbody were estimated for various management water levels and flow rates scenarios. The results indicated that the thermal stability of the waterbody is mostly high ($Ri{\gg}0.25$) enough to establish stratification, and largely depend on the flow velocity. The critical flow velocity that can avoid a persistent thermal stratification was found to be approximately 0.1 m/s.

농업용 저수지의 점오염원 바이패스 효과 평가를 위한 EFDC 모델의 적용

김동민,박형석,정세웅,Kim, Dong Min,Park, Hyung Seok,Chung, Se Woong 한국농공학회 2016 한국농공학회논문집 Vol.58 No.6

Agricultural reservoirs in Korea have been recognized as an emerging resource for recreational and cultural activities for residents. However, most of the reservoirs are eutrophic and showing high level of contamination with nuisance algal bloom and offensive odor during the summer. For better management and restoration of the reservoirs' water quality, scientific modeling approaches could be used to diagnose the problems and evaluate the efficacy of alternative control measures. The objectives of this study were to validate the performance of a three-dimensional (3D) hydrodynamic and water quality model (Environmental Fluid Dynamics Code, EFDC) for a eutrophic agricultural reservoir and assess the effect of bypassing of the effluent from a wastewater treatment plant on the reservoir water quality. The 3D model successfully simulated the temporal variations of water temperature, DO, TOC, nitrogen and phosphorus species and Chl-a observed in 2014 and also captured their spatial heterogeneity in the reservoir. The simulation results indicated that the point source bypassing may reduce the T-N and T-P concentrations of the reservoir by 6.6 ~ 8.2 %, and 1.7 ~ 16.8 %, respectively. The bypassing, however, showed a marginal effect on the control of TOC due to the increased algal biomass associated with the increased water retention time after bypassing as well as the lower TOC level of the effluent compared to the ambient reservoir water.

엽납석을 활용한 저열팽창 코디어라이트 세라믹스 합성

김동민,정숙인,이훈철,이상진,Kim, Dong-Min,Jung, Sook-In,Lee, Hun-Chul,Lee, Sang-Jin 한국재료학회 2015 한국재료학회지 Vol.25 No.7

A low thermal expansion ceramic, cordierite ($2MgO{\cdot}2Al_2O_3{\cdot}5SiO_2$), was synthesized using pyrophyllite. Pyrophyllite usually consists of $SiO_2$ and $Al_2O_3$, which are the main components of cordierite. $MgCO_3$ and $Al(OH)_3$ were added in various amounts to pyrophyllite and fired for synthesis and sintering. ${\alpha}$-cordierite crystallized from $1000^{\circ}C$ with mixing of 20 wt% $MgCO_3$ and 1.7 wt% $Al(OH)_3$, and un-reacted cristobalite was also detected with the cordierite. As the temperature was increased to $1400^{\circ}C$, the cordierite yield was gradually increased. Powder compacts of the synthesized cordierite were sintered between $1250^{\circ}C{\sim}1400^{\circ}C$; the sintered samples showed a low thermal expansion coefficient of $2.1{\times}10^{-6}/^{\circ}C$ and typical sintering behavior. It is anticipated that it will be possible to synthesize cordierite ceramics on a mass production scale using the mineral pyrophyllite.

인쇄전자를 위한 롤투롤 시스템의 필름 정밀제어에 관한 연구

김동민,최종근,김형선,Kim, Dong-Min,Choi, Jong-Guen,Kim, Hyung-Sun 한국생산제조학회 2010 한국생산제조학회지 Vol.26 No.1

RFID printing technology has emerged recently as an important tool for leading future IT. Therefore, many manufacturers concerning on low cost and mass production of the related products pay close attention to the printing technology. In order to realize printed electronics, the technologies for fine line-width/gap printing and registration are essential work. This study proposes a precise Roll to Roll control system that is capable of tilting two posts. Two controllable tilting posts can adjust film position at traverse direction for the precision registration. A mathematical model for representing the geometric features of each posts in Roll to Roll printing system is established first. Then an operating program is built to implement the system and to control film movement. For experimental test, a hard ware system is fabricated which is consisted of two AC servo motors, two posts tilting mechanisms, several guide rolls, and so on. The test results show the proposed system can control the film position precisely at transverse direction.

Epigallocatechin Gallate (EGCG)에 노출된 용혈성 Bacillus cereus MH-2의 세포 반응 및 프로테옴 분석

김동민,박상국,오계헌,Kim, Dong-Min,Park, Sang-Kook,Oh, Kye-Heon 한국미생물학회 2016 미생물학회지 Vol.52 No.3

본 연구의 목적은 시중에 판매되고 있는 쌈장에서 용혈성을 가지는 Bacillus cereus MH-2를 분리하여, EGCG 노출에 따른 MH-2 균주의 세포 반응과 프로테옴 분석을 위해 수행되었다. 다양한 농도의 EGCG에 노출된 MH-2 균주는 노출시간이 증가함에 따라 생존률은 점차 감소함을 보였다. MH-2 균주의 alginate 생성량은 EGCG의 농도가 증가함에 따라 감소하였으며, 특정 EGCG 농도에서 노출시간이 진행됨에 따라 그 생성량은 증가하는 것으로 나타났다. SDS-PAGE 및 anti-DnaK와 anti-GroEL의 단일항체를 이용한 Western blot 통한 분석으로, 두 가지 스트레스 충격단백질인 70 kDa의 DnaK와 60 kDa의 GroEL의 발현은 대수생장기의 배양에서 EGCG의 농도에 비례하여 감소하는 것을 확인하였다. EGCG에 노출된 세균의 세포 외부형태 변화를 주사전자현미경을 이용하여 관찰한 결과, 세포 표면의 돌출부 생성과 함께 세포의 뭉그러짐이 관찰되었다. EGCG에 노출된 Bacillus cereus MH-2 배양의 수용성 단백질 부분에 대한 2-DE에서 20개의 단백질 스팟이 EGCG 노출에 의해 크게 변화하는 것이 확인되었다. 장독소(hemolysin BL lytic component L1, hemolysin BL-binding protein), chaperon (DnaK, GroEL), 세포방어요소(peptidase M4 family proteins), 에너지 및 물질대사 등에 수반되는 이들 단백질은 MALDI-TOF를 사용한 peptide mass fingerprinting에 의해 동정되었다. 이들 결과는 B. cereus MH-2에 대한 EGCG-유도 스트레스와 세포독성의 기작을 이해하는데 중요한 단서를 제공할 것이다. The aim of this work was to investigate the cellular responses and proteomic analysis of Bacillus cereus MH-2 exposed to EGCG. Strain MH-2 was isolated from commercial Ssamjang and has the hemolytic activity. Survival of the MH-2 strain with time in the presence of different concentrations of EGCG under sublethal conditions was monitored. The amount of alginate from MH-2 strain decreased depending on the increasing concentrations of EGCG and increased depending on the exposure time at any particular EGCG concentration. Analysis of SDS-PAGE and Western blot using anti-DnaK and anti-GroEL revealed that two stress shock proteins, 70 kDa DnaK and 60 kDa GroEL were found to decrease in proportion to the EGCG concentration in exponentially growing cultures. Scanning electron microscopic analysis demonstrated the presence of protrusions and fused rod forms on the cells treated with EGCG. 2-DE of soluble protein fractions from MH-2 cultures showed 20 protein spots changed by EGCG exposure. These proteins involved in enterotoxins (hemolysin BL lytic component L1 and hemolysin BL-binding protein), chaperons (DnaK and GroEL), cell defense (peptidase M4 family proteins), and various biosynthesis and energy metabolism were identified by peptide mass fingerprinting using MALDI-TOF. These results provide clues for understanding the mechanism of EGCG-induced stress and cytotoxicity on B. cereus MH-2.

다양한 공조 방식

김동민,Kim, Dong-Min 한국설비기술협회 1997 설비 : 공조ㆍ냉동ㆍ위생 Vol.14 No.9

피에조콘 관입시험(CPTu)활용을 위한 서해안지역의 콘계수(Nkt)산정 사례

김동민,박수범,Kim, Dong-Min,Park, Su-Beom (사)한국토질및기초기술사회 2006 지반과 기술 Vol.3 No.1

복제 기법을 이용한 찰갑의 보존처리 - 김해 진영 2지구 출토품의 보존처리 사례를 중심으로 -

김동민,박중혁,조현경,조남철,Kim, Dong Min,Park, Jung Hyeok,Cho, Hyun Kyung,Cho, Nam Chul 한국문화재보존과학회 2015 보존과학회지 Vol.31 No.1

찰갑은 매납 이후 부식으로 약화되고 토압에 의해 각 소찰들이 흐트러진 상태로 출토된다. 따라서 출토 즉시 현장 보존처리를 통해 출토 당시의 모습 그대로 실내로 옮겨져야 하며, 실내 보존처리에서는 단단한 지지층으로 보강하여 바닥에 놓여 진 후에도 안정적으로 유지될 수 있도록 조치해야 한다. 이 과정에서 보존처리 후 실견이 불가능한 바닥면에 대해서는 실측과 사진촬영 등을 통해 자료를 남기게 되는데, 이와 같은 자료만으로 유물을 정확히 이해하는데 한계가 있기 마련이다. 이를 보완하기 위한 방법으로 '김해 진영 2지구' 출토 찰갑의 보존처리에서는 바닥면에 대한 자료화 방법으로 실측, 사진촬영 이외에 복제를 통해 실견자료를 확보하고자 하였다. 또한 경갑은 토압에 의해 좌우로 찌그러져 정확한 형태를 파악하기 어려운 상태였는데, 개별 지판을 복제한 후 하나로 합쳐 매장 당시의 원형대로 복원하여 실물자료를 확보하였다. 찰갑의 보존처리에서 새로이 복제 기법을 적용하여 육안으로는 관찰이 어려웠던 바닥면과 경갑에 대한 실물자료를 확보하게 됨으로써, 유물에 대한 이해도를 높이고 갑옷의 구조를 보다 효과적으로 확인할 수 있게 되었다. A scale Armor is usually excavated in a scattered form weakened by corrosion after its burial. Therefore, they should be brought into the indoor in a safe environment for the on-site conservation treatment as it was excavated. They should be placed on a stable support with a reinforced base in the indoor treatment. In this process, the bottom surface which can not be observed after the conservation treatment is placed for a record by actual survey and photography. But this method had a limit on figuring out the whole aspects of the artifact. For compensating the defect, duplication of the artifact was considered as an alternative method for the previous two methods in the case of conservation of the scale Armor from Jinyoung 2-Area, Gimhae. Neck guard was excavated in a distorted form by the earth pressure, and was hard to recognize the original shape. However, whole real material of its original form was secured through the combination of each duplicated lamellae. Throughout the application of the duplication technique in the process of conservation of scale Armor and neck guard, it could secure the real material of the bottom surface and elevate the understanding of the artifact. Moreover, a constitution of the armor could be identified more effectively.