http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소듐냉각고속로 잔열제거계통 강제대류 소듐-공기 열교환기의 구조개념 설계
김낙현,이사용,김성균,Kim, Nak Hyun,Lee, Sa Yong,Kim, Sung Kyun 한국압력기기공학회 2016 한국압력기기공학회 논문집 Vol.12 No.1
The FHX (Forced-draft sodium-to-air Heat Exchanger) employed in the ADHRS (active decay heat removal system) is a shell-and-tube type counter-current flow heat exchanger with M-shape finned-tube arrangement. Liquid sodium flows inside the heat transfer tubes and atmospheric air flows over the finned tubes. The unit is placed in the upper region of the reactor building and has function of dumping the system heat load into the final heat sink, i.e., the atmosphere. Heat is transmitted from the primary cold sodium pool into the ADHRS sodium loop via DHX (decay heat exchanger), and a direct heat exchange occurs between the tube-side sodium and the shell-side air through the FHX tube wall. This paper describes the DHRS and the structural design of the FHX.
22MnB5의 Hot Stamping시 냉각속도와 냉각유량에 따른 기계적 성질과 조직변화 특성 연구
김낙현(Nak-Hyun KIM),권기영(Ki-Young Kwon),강충길(Chung-Gil Kang) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
The hot press forming (HPF) process is the forming method which provides various advantages such as excellent mechanical properties and formability, good weldability, and little springback of the deformed materials. Here, because change in mechanical properties according to the cooling rate to a great extent exhibits, process parameters, such as location of the cooling holes and the flow rate of the cooling water, play an important role at the HPF process. In this paper, after obtaining the austenite microstructure by heating the Al-Si coated boron sheet up to 930℃ for 5 min, it was formed by the hydraulic press. Hereafter, mechanical properties were investigated in terms of the cooling rate and microstructural evolution and the associated mechanical properties were also investigated in terms of the flow rate of the cooling water.
시간 경과 신경계 영상 시퀀스에서의 축삭돌기 추출 기법
김낙현(Nak Hyun Kim) 한국지능시스템학회 2014 한국지능시스템학회논문지 Vol.24 No.3
신경계 영상 해석의 목적은 움직이는 미토콘드리아들을 추적하여 그 속도와 이동 방향 등을 추출하는 것인데, 미토콘드리아의 움직임은 축삭돌기 상에서만 이루어지는 특징이 있다. 축삭돌기 추출 작업은 일반적으로 수작업을 동반한 처리 과정을 통해 이루어지고 있는데, 본 논문에서는 자동화된 축삭돌기 추출 기법을 제안한다. 우선 전체 비디오 프레임 영상에서 각 픽셀의 최대값을 취해 통합영상을 구한다. 통합 영상에서 축삭돌기는 능선 구조를 보이는데, 능선을 검출하기 위해 본 연구에서는 능선 강화 필터링과 피크 검출 과정을 적용하였다. 또한 검출된 능선점에서 나타난 오류를 제거하기 위해 대해 각 능선점 주위에서 신뢰도 함수를 사용한 필터링을 적용한다. 실제 영상을 이용한 실험을 통해 제안된 방식은 높은 검출률과 정확도를 나타내는 것을 확인하였다. The purpose of the neural image analysis is to trace the velocities and the directions of moving mitochondria migrating through axons. This paper proposes an automated technique for detecting axon structure. Previously, the detection process has been carried out using a partially automated technique combined with some human intervention. In our algorithm, a consolidated image is built by taking the maximum intensity value on the all image frames at each pixel Axon detection is performed through vessel enhancement filtering followed by a peak detection procedure. In order to remove errors contained in ridge points, a filtering process is devised using a local reliability measure. Experiments have been performed using real neural image sequences and ground truth data extracted manually. It has been turned out that the proposed algorithm results in high detection rate and precision.
김낙현(Nak Hyun Kim),오창식(Chang Sik Oh),김윤재(Yun Jae Kim) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.6
수소 확산과 탄-소성 거동이 결합된 모델은 이미 제시되어 있다. 본 논문에서는 수소확산에 미치는 인자들과 그 영향에 대해 연구하였다. 각 인자들의 영향을 비교하기 위해 저탄소강 재료의 균열이 있는 무한 평판 모델에 대해 수소확산과 기계적 하중이 연계된 유한요소 해석을 수행하였다. 유한요소 해석 결과는 Taha 와 Sofrinis 의 연구(2001) 결과와 비교하여 검증하였다. The coupled model with hydrogen transport and elasto-plasticity behavior was introduced. In this paper, the effective factor of the hydrogen diffusion equation has been described. To assess the effective factor, finite element (FE) analyses including hydrogen transport and mechanical loading for boundary layer specimens with low-strength steel properties are carried out. The results of the FE analyses are compared with those from previous studies conducted by Taha and Sofronis (2001).
Inconel 617 재료의 소형펀치 실험을 이용한 수소취화처리재의 탄-소성 거동 및 파괴인성 유추
김낙현(Nak Hyun Kim),김윤재(Yun Jae Kim),윤기봉(Kee Bong Yoon),마영화(Young Hwa Ma) 대한기계학회 2013 大韓機械學會論文集A Vol.37 No.6
금속 재료의 수소취화 현상에 대한 분석은 수소플랜트의 안전성 평가를 위해 매우 중요하다. 수소환경하 취화된 재료의 기계적 물성과 파괴인성은 구조 건전성 평가에 가장 기본적이며 중요한 자료이다. 본 논문은 최근에 개발된 유한요소 해석 기반 현상학적 손상해석을 소형펀치 실험에 적용하고 Inconel 617 재료의 대기 중 소형펀치 실험결과와 비교 함으로써 손상해석 기법의 적용 타당성을 보였다. 또한 역변환 기법을 사용하여 소형펀치 실험으로부터 인장물성을 예측하고 인장실험으로부터 구한 재료물성과 비교하여 적용 가능성을 검증하였다. 검증된 결과를 바탕으로 수소취화된 시편에 대한 소형펀치 실험결과에 역변환 기법과 손상해석을 적용하여 수소취화 된 재료의 기계적물성과 파괴인성을 예측하였다. The hydrogen embrittlement of metallic materials is an important issue from the viewpoint of structural integrity. In this regard, the estimation of mechanical properties and fracture toughness under hydrogen conditions provides very important data. This study provides an experimental validation of the approach for simulating the small punch of Inconel 617 using finite element damage analysis, as recently proposed by the authors, and applies an inverse method for the determination of the constitutive tensile behavior of materials. The mechanical properties obtained from the inverse method are compared with those obtained from the tensile test and validated. The mechanical properties and fracture toughness are predicted by using the inverse method and finite element damage analysis.
CT 관류 영상 해석에서의 SVD 계수 임계화 기법의 성능 비교
김낙현(Nak Hyun Kim) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6
Singular Value Decomposition (SVD) 기반의 디콘볼루션 방식은 CT 관류 영상 해석에서 가장 널리 사용되는 기법이다. 이 방식에서는 잡음의 영향을 줄이기 위해 SVD 계수를 임계화하는 과정이 사용된다. 이 때 임계화 경계치로 고정된 값을 사용하거나 미리 정해진 진동 지수(Oscillation Index)에 따른 경계치가 사용된다. 이들 두 임계화 방식은 계산량과 정확도 측면에서 서로 장단점을 가지고 있다. 본 논문에서는 두 임계화 방식의 정확도를 비교하기 위한 몬테 칼로 모의 실험 방식을 제안한다. 또한 관류 해석시 사용하는 평활화 과정이 알고리즘의 정확도에 미치는 영향을 측정하기 위해 이 실험 방식을 확장하였다. 본 논문에서는 이와 같은 성능 비교를 위한 모의 실험 방식을 제시하고, 모의 데이터와 실제 CT 영상에 대한 실험 결과를 소개한다. SVD-based deconvolution algorithm has been known as the most effective technique for CT perfusion image analysis. In this algorithm, in order to reduce noise effects, SVD coefficients smaller than a certain threshold are removed. As the truncation threshold, either a fixed value or a variable threshold yielding a predetermined OI (oscillation index) is frequently employed. Each of these two thresholding methods has an advantage to the other either in accuracy or efficiency. In this paper, we propose a Monte Carlo simulation method to evaluate the accuracy of the two methods. An extension of the proposed method is presented as well to measure the effects of image smoothing on the accuracy of the thresholding methods. In this paper, after the simulation method is described, experimental results are presented using both simulated data and real CT images.