http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권혁천,이용준,박원형 한국융합보안학회 2020 융합보안 논문지 Vol.20 No.5
본 연구의 목적은 북한의 사이버 공격과 우리의 대응에 대해 노무현 정부 부터 문재인 정부까지 정부별로 비교 분석 하는 데 있다. 현재 한반도는 미국, 중국, 러시아 등 다양한 이해관계가 상충되면서 새로운 세계질서의 주도권 다툼이 사이버상에서 충돌로 이어지고 있다. 사이버 공격의 속도는 빨라지고 위협의 수위는 높아지고 있다. 사이버 위협은 몇 가지 특징을 보이고 있다. 무엇보다 위협의 주체를 확인하거나 추적하기 어렵다는 점이다. 또한 정보통신기술의 발달로 공격기술이 지능화되어 이에 대응하는 수단을 마련하기도 쉽지 않다. 따라서, 국가사이버안보를 위해 지속적이고 선제 적인 대응 역량을 제고하고, 국가간 또는 민간 전문가간의 국제협력과 같은 여러 행위자간의 거버넌스 구축이 필요하다. The purpose of this paper is to ccompare and analyze North Korean cyber attacks and our responses by government, fr om the Roh Moo-hyun administration to the Moon Jae-in administration. The current conflict of interests on the Korean p eninsula, such as the United States, China, and Russia, is leading to a conflict for the leadership of a new world order in cyberspace. Cyber attacks are accelerating and threats are rising. Cyber threats exhibit several characteristics. Above all, i t is difficult to identify or track the subject of the threat. Also, with the development of information and communication te chnology, attack technology has become more intelligent, and it is not easy to prepare a means to respond. Therefore, it is necessary to improve continuous and preemptive response capacity for national cybersecurity, and to establish governance among various actors, such as international cooperation between countries or private experts.
입자분산강화 알루미늄 복합재의 압출가공특성에 관한 연구
권혁천,윤의박,Gwon, Hyeok-Cheon,Yun, Ui-Park 한국재료학회 1995 한국재료학회지 Vol.5 No.8
분말야금법으로 제조된 A6061기 입자분산강화 복합재의 열간압술가공에 있어서 압출특성에 미치는 강화입자의 종류, 빌렛특성 및 암술조건의 영향에 대하여 조사하였다. A6061기 복합재료의 열간 압술 전단 변형저항에 미치는 강화입자종류의 영향은 Si $C_{w}$ > A1$_2$ $O_{3f}$ > A1$_2$ $O_{3f}$ > Si $C_{p}$의 순으로 되었으며, 모든 강화입자에서 부피분율이 증가함에 따라서 Kw값도 증가하였다. 압출조건, 강화입자의 첨가량 및 첨가입자의 평균입도에 관계없이 A1$_2$ $O_{3p}$가 첨가된 복합재의 열간압출가공에 필요한 소요압력은 Si $C_{p}$의 경우보다 컸다. 압출압력은 압출 다이스 반각이 커질수록 감소하는 경향은 나타났다. 이것은 다이스 반각에 의해 생성되는 빌렛과의 접촉면적이 증가하여 전단마찰응력(m $k_3$)이 상승하기 때문이다. 압출시 압출온도 상승은 저온에서 ~$50^{\circ}C$ 정도 증가하였으며, 압출온도가 50$0^{\circ}C$ 이상이 되면 압출재 표면에 극심한 tearing이 발생하였다. 강화입자의 첨가량이 증가할수록 이 현상은 더 심하게 되었다.게 되었다. It was investigated that reinforced species, billet condition and extrusion variation in Al 6061 composite material effected on extrusion process of particulate reinforced composite material. The strength of composite material with reinforcement species revealed SiC$\sub$w/> A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ orderly. K$\sub$w/ increased as volute fraction increased in all composite material. The composite materials reinforced by A1$_2$ $O_3$required the larger pressure in hot extrusion process than those by SiC$\sub$p/ at all condition. Extrusion process tended to decrease as the semi-angle of extrusion dies increased because larger contact area caused larger shear friction. Extrusion temperature went up about 50$^{\circ}C$ in low elevated deformation temperature. In extrusion temperature above 500$^{\circ}C$, severe tearing occurred on extrusion surface. More reinforcement in volume fraction, more hot tearing.
프로젝트 예산 편성을 위한 최적의 우발 예비비(Contingency Reserve) 및 프로젝트 예비비(Management Reserve) 산정
권혁천,라장원 한국프로젝트경영학회 2012 한국프로젝트경영연구 Vol.2 No.1
프로젝트가 완성되기 전까지 정확한 투입 원가를 알기란 매우 어려운 일이다. 프로젝트는 항상 불확실성(Uncertainty)과 리스크(Risk)를 동반하기 때문이며, 이러한 불확실성과 리스크는 프로젝트 관리에서 매우 중요한 지식 영역이기도 하다. 이러한 상황임에도 불구하고 프로젝트의 예산을 사전에 편성하여야 하며, 불확실성과 리스크는 프로젝트 예산 편성에 영향을 미치며, 리스크의 발생 유무에 따라 추가 비용이 발생하게 되는데, 이것을 우발 예비비(Contingency Reserve) 와 프로젝트 예비비(Management Reserve) 로 구분하여 관리하고 있다. 본 논문에서는 프로젝트 예산 편성에 필요한 적정 예비비 선정에 있어 우발 예비비와 프로젝트 예비비를 구분하여 불확실성과 리스크가 각각의 예비비에 미치는 영향을 이론적 배경과 사례를 통해 편성 방법의 모형을 제공한다. 본 논문에 사용한 도구로서는 AHP(Analytical Hierarchy Process), Decision Tree method, @Risk 를 사용하였다