http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
싸이클화 클릿 위치 변화에 따른 하지관절 각도와 종아리 근육의 피로도 분석
권익진(Kwon, Ik-Jin),박성제(Park, Sung-Je),정우영(Chung, Woo-Young),윤소미(Yun, Somi) 한국웰니스학회 2020 한국웰니스학회지 Vol.15 No.1
본 연구는 싸이클 수행 중 싸이클화의 클릿 위치 변화가 하지관절각도와 종아리 근육의 피로도를 비교조사하여 달리기 수행능력에 미치는 요인을 규명하는데 목적이 있다. 4년 경력이상의 트라이애슬론 선수 9명을 실험군5명, 통제군 4명으로 나누었다. 관절각도 실험에서 실험군은 일반클릿위치(TCP)와 뒷클릿위치(ACP)의 싸이클화를 착용하고 동일한 기어비와 60rpm으로 유지하며 크랭크 arm의 위치에 따라 하지관절각도(고관절, 무릎관절, 발목관절)를 영상측정하여 분석하였다. 또한, 종아리 피로도 실험에서는 실험군과 통제군의 5km 전력싸이클 수행 후 발목점프(ankle jump)에서 얻어진 데이터로 종아리 근육 피도로를 분석하였다. 싸이클 클릿화의 위치에 따라 TCP는 ACP보다 크랭크 arm이 270° 무릎관절 가동범위(TCP:85±1.9°, ACP:88.3°)가 유의한 차이가 났으며(p<.05) 발목관절과 고관절의 차이는 유의하지 않았다. 종아리 근육 피로도는 TCP가 ACP보다 높게 측정되었다 (TCP:2.8±1.9cm, 0.0±0.2cm)(p<.05). 종아리근육의 피로도는 달리기 수행능력과 밀접한 연관이 있다. ACP는 종아리근육 피로도에 긍정적인 효과를 주었으며 그 원인은 싸이클 수행 중 무릎관절의 가동범위가 축소됨으로써 종아리 근육의 피로도가 감소했기 때문이다. ACP는 트라이애슬론과 듀애슬론과 같은 멀티 스포츠 경기에서 싸이클 수행 중 종아리 근육의 피로도를 줄임으로써 달리기 수행능력을 향상시키는데 도움이 될 것으로 사료된다. The purpose of this study was to investigate the factors affecting the running performance by comparing the cleat position changes of the cycling between the lower extremities ROM and calf muscles fatique. Nine triathon athletes with four years of experience were divided into five experimental and four control groups. in the lower extremities joint angle test, the experimental group wears the cycle between the traditional cleat position(TCP) and aft cleat position(ACP), and maintains the same gear ratio and 60 rpm, and according to the position of the crank arm. In the calf fatigue test, the calf muscles were analyzed using data obtained from ankle jump after 5km power cycle between the experimental and control groups. According to the position of the cleat position, the TCP range of motion was higher when the crank arm was 270° than ACP, and the difference between the ankle joint(TCP:85±1.9, ACP:88.3)(p<.05) and the hip joint was not significant. Calf muscle fatigue was measured by TCP higher than ACP(TCP:2.8±1.9cm, 0.0±0.2cm)(p<.05). the calf muscle fatigue is closely related to running performance. ACP had a positive effect on the calf muscle fatigue, and the cause was that the calf muscle fatigue was reduced due to the reduced range of knee joint movement during the cycling. ACP is expected to help improve running performance by reucing the calf muscle fatigue during cycling in multisport events such as triathlon and duathlon.
오토트랜스포머를 이용한 RFID용 CMOS 송신 누설 신호 제거기
최인덕(Induck Choi),권익진(Ickjin Kwon) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.8
본 논문에서는 UHF RFID 리더에서의 오토트랜스포머를 이용한 가변 송신 누설 신호 제거기를 제안하였다. 제안된 송신 누설 신호 제거기는 오토트랜스포머와 디지털 가변 캐패시터, 가변 저항, 보상 증폭기로 구성되었으며, 0.13 ㎛ 1-폴리 6-메탈 RF CMOS 공정을 사용하여 설계되었다. 시뮬레이션 결과, 제안된 구조는 송신단에서 수신단으로 신호가 전송될 때 55 ㏈ 이상의 송신 누설 신호 제거도를 보이며, 2.5 ㏈의 수신 삽입 손실을 갖는다. 송신 누설 신호 제거 회로는 825 ㎒에서 985 ㎒까지 디지털 주파수 조정이 가능하며, CMOS 공정으로 집적될 수 있다. In this paper, a tunable integrated transmitter leakage canceller based on an autotransformer for ultra-high-frequency (UHF) RFID readers is presented. The proposed TX leakage canceller consists of an autotransformer, a digital tuning capacitor, a voltage controlled tuning resistor, and a compensating amplifier, and it is designed using 0.13 ㎛ 1-poly 6-metal RF CMOS process. The simulation results show that the proposed structure has over 55 ㏈ rejection characteristic between a transmitter and a receiver and a 2.5 ㏈ of the RX insertion loss. The TX leakage canceller can be digitally tuned from 825 ㎒ to 985 ㎒ with the tuning capacitor and it can be fully integrated.
접힌 다이폴 구조를 적용한 L-Band 원통형 능동 위상배열 안테나 설계
이만규(Man-Gyu Lee),권익진(Ickjin Kwon) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6
본 논문에서는 원통형태의 배열구조에서 수평면 (H-plane), 수직면 (E-Plane) 빔조향 특성을 갖는 원통형 능동위상배열 안테나를 제안하였다. 상호결합특성이 우수한 접힌 다이폴 안테나를 원통의 배열구조에 적합하도록 설계하고, 수칙과 수평으로 8x8 원통 배열구조를 갖는 지향성 배열안테나와 전력 분배를 위한 결합분배기를 설계 및 제작하였다. 원통배열 안테나의 복사소자 배열 간격은 반전력 빔폭과 빔 조향 시 그레이팅로브가 발생하지 않도록 결정하였다. 안테나의 빔 조향은 송수신장치 내부의 6비트 위상변위기를 이용하여 구현하였으며, 안테나 빔조향 시 수평면으로 -24도~24도, 수직면 기준으로 0도~36도의 빔조향 특성을 갖도록 고안되었다. In this paper, we propose a cylindrical active phased array antenna of Beam Steering Characteristics in the horizontal plane(H-plane) and vertical plane(E-Plane) on the cylinder form array structure. We design the bent dipole antenna of the cylindrical array structure adapted excellent mutual-coupling characteristics, designed and manufactured the cylindrical array antennas and power combiner/divider unit for power dividing and combining on the antenna The radiating elements array spacing of Cylindrical array antenna were determined to avoid grating lobes at half power beam steering. Beam steering of the antenna was implemented with 6-bit phase shifter in the transceiver and have been designed based on the characteristics the antenna beam steering at -24 degrees to 24 degrees horizontal, vertical 0 degrees to 36 degrees beam steering. A cylindrical active phased array antenna that produced for verification the performance of the antenna are measured radiation characteristics in accordance with beam steering at L-Band.