http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오토트랜스포머를 이용한 RFID용 CMOS 송신 누설 신호 제거기
최인덕(Induck Choi),권익진(Ickjin Kwon) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.8
본 논문에서는 UHF RFID 리더에서의 오토트랜스포머를 이용한 가변 송신 누설 신호 제거기를 제안하였다. 제안된 송신 누설 신호 제거기는 오토트랜스포머와 디지털 가변 캐패시터, 가변 저항, 보상 증폭기로 구성되었으며, 0.13 ㎛ 1-폴리 6-메탈 RF CMOS 공정을 사용하여 설계되었다. 시뮬레이션 결과, 제안된 구조는 송신단에서 수신단으로 신호가 전송될 때 55 ㏈ 이상의 송신 누설 신호 제거도를 보이며, 2.5 ㏈의 수신 삽입 손실을 갖는다. 송신 누설 신호 제거 회로는 825 ㎒에서 985 ㎒까지 디지털 주파수 조정이 가능하며, CMOS 공정으로 집적될 수 있다. In this paper, a tunable integrated transmitter leakage canceller based on an autotransformer for ultra-high-frequency (UHF) RFID readers is presented. The proposed TX leakage canceller consists of an autotransformer, a digital tuning capacitor, a voltage controlled tuning resistor, and a compensating amplifier, and it is designed using 0.13 ㎛ 1-poly 6-metal RF CMOS process. The simulation results show that the proposed structure has over 55 ㏈ rejection characteristic between a transmitter and a receiver and a 2.5 ㏈ of the RX insertion loss. The TX leakage canceller can be digitally tuned from 825 ㎒ to 985 ㎒ with the tuning capacitor and it can be fully integrated.
접힌 다이폴 구조를 적용한 L-Band 원통형 능동 위상배열 안테나 설계
이만규(Man-Gyu Lee),권익진(Ickjin Kwon) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6
본 논문에서는 원통형태의 배열구조에서 수평면 (H-plane), 수직면 (E-Plane) 빔조향 특성을 갖는 원통형 능동위상배열 안테나를 제안하였다. 상호결합특성이 우수한 접힌 다이폴 안테나를 원통의 배열구조에 적합하도록 설계하고, 수칙과 수평으로 8x8 원통 배열구조를 갖는 지향성 배열안테나와 전력 분배를 위한 결합분배기를 설계 및 제작하였다. 원통배열 안테나의 복사소자 배열 간격은 반전력 빔폭과 빔 조향 시 그레이팅로브가 발생하지 않도록 결정하였다. 안테나의 빔 조향은 송수신장치 내부의 6비트 위상변위기를 이용하여 구현하였으며, 안테나 빔조향 시 수평면으로 -24도~24도, 수직면 기준으로 0도~36도의 빔조향 특성을 갖도록 고안되었다. In this paper, we propose a cylindrical active phased array antenna of Beam Steering Characteristics in the horizontal plane(H-plane) and vertical plane(E-Plane) on the cylinder form array structure. We design the bent dipole antenna of the cylindrical array structure adapted excellent mutual-coupling characteristics, designed and manufactured the cylindrical array antennas and power combiner/divider unit for power dividing and combining on the antenna The radiating elements array spacing of Cylindrical array antenna were determined to avoid grating lobes at half power beam steering. Beam steering of the antenna was implemented with 6-bit phase shifter in the transceiver and have been designed based on the characteristics the antenna beam steering at -24 degrees to 24 degrees horizontal, vertical 0 degrees to 36 degrees beam steering. A cylindrical active phased array antenna that produced for verification the performance of the antenna are measured radiation characteristics in accordance with beam steering at L-Band.