http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권순우(Soonwoo Kwon),김병준(Byungjoon Kim),노혜란(Hyeran Noh) 한국고분자학회 2017 폴리머 Vol.41 No.2
스핀코팅 시 액체의 유변학적 성질을 고려하여 다관능 아크릴레이트 기반의 광학용 자외선 차단 코팅을 개발하였다. 스핀코팅 시 변수들(회전속도, 고정 회전속도 도달시간, 가교시간)에 따른 코팅막의 광 차단율, 코팅 두께 그리고 코팅의 신뢰성을 평가하였다. 그 결과 우레탄 올리고머 추가 없이 다관능의 아크릴레이트 단량체의 조합으로 UV 차단율이 68%(UV-A와 UV-B) 이상 가능하고 가시광선 투과율이 95% 이상인 광학용으로 적합한 광 차단코팅을 제조하였다. 스핀코터의 회전 속도와 최고 회전속도 도달 시간이 증가함에 따라 코팅 박막의 두께와 자외선 차단율이 증가하는 추세를 보였다. 본 연구에서는 실험과 이론으로 스핀코팅 공정과정을 분석하였으며 그 결과 우수한 광학 특성, 내마모성, 내화학성을 지니는 UV차단 코팅막을 개발하였다. Acrylate based UV protective coating was developed with understanding of rheological properties of polymer fluid. Depending on variables (a rotating speed, ramping time to reach the fixed speed, and crosslinking time), we evaluated physical properties such as film thickness, light blocking rate, and reliability. As a result, thin optical transparent film with UV blocking rate of 68% (total of UV-A and UV-B) and visible light transmittance of more than 95% was developed with acrylate based polymer film excluding urethane oligomers. With increasing rotating speed and ramping time to reach the fixed rotating speed, thickness and the light blocking rate of film was increased. In conclusion, we examined the spin coating process both experimentally and fundamentally with acrylate based UV protective coating. The developed UV protective film showed good optical properties in addition to satisfactory wear and chemical resistances.
권순우(Soonwoo Kwon),강용진(Yongjin Kang),유지윤(Jiyoon Yoo) 전력전자학회 2005 전력전자학술대회 논문집 Vol.- No.-
브러시리스 직류 전동기는 자속을 줄일 수 없는 영구자석형 전동기이기 때문에 입력 전압과 역기전력의 위상 차이를 조절하는 방법으로 약계자 운전을 적용하며 이를 진각제어라 한다. 본 논문에서는 진각제어 운전특성을 분석하여 진각제어 시의 속도변화를 수치적으로 유도하였다.
청각장애학생 통합교육의 찬반 논쟁과 성공적인 통합교육: 특수교육전공 대학원생의 FGI 내용분석
이학준 ( Lee Hakjun ),권순우 ( Kwon Soonwoo ),정병종 ( Jeong Byungjong ) 대구대학교 한국특수교육문제연구소 2022 특수교육저널 : 이론과 실천 Vol.23 No.2
[목적] 이 연구의 목적은 청각장애 학생의 통합교육 찬반 논쟁과 성공적인 통합교육을 탐구하는 것이다. [방법] 이를 위하여 특수교육전공 대학원생 10명을 대상으로 진행한 포커스 그룹 인터뷰 녹취 자료를 전사한 후 분석하였다. 그 결과는 다음과 같다. [결과] 첫째, 청각장애학생의 통합교육 찬반 논쟁이다. 찬성 논리는 사회성과 자아존중감 발달, 언어능력 향상과 잠재적 능력 개발, 긍정적인 또래 관계 형성, 청각장애학생과 비장애학생의 교육적 효과, 장애학생에 대한 인식 개선 등이다. 반면에 반대 논리는 의사소통의 어려움, 일반교사의 전문성 부족, 비장애학생의 부정적인 인식과 특수교사의 소극적 태도, 청각장애학생의 학습기기 부족, 코로나19의 원격수업에서 소외 등이다. 둘째, 청각장애학생의 성공적인 통합교육을 위해 개인적 차원에서 교사, 비장애학생의 청각장애학생에 대한 인식 전환, 특수교사와 통합교육 담임교사의 전문성 개발이 필요하다. 사회적 차원에서는 국가, 학교에서 행정, 재정, 기기 지원과 같은 제도 개선이 필요함을 제안하였다. [결론] 청각장애학생의 통합교육은 이상과 현실의 괴리에서 문제가 발생하고 있다. 성공적인 통합교육을 위해서 현실의 걸림돌을 제거할 수 있어야 한다. 작은 사회라고 할 수 있는 학교에서 우리는 청각장애학생과 비장애학생의 통합교육을 통하여 장애와 비장애 구분 없이 함께 사는 사회를 경험할 수 있어야 할 것이다. [Purpose] The purpose of this study is to discuss the pros and cons of inclusive education for deaf students and to explore successful inclusive education. [Method] To this end, the focus group interview (FGI) recording data conducted for 10 graduate students majoring in special education were analyzed after transcription. The results are as follows. [Result] First, it is a debate on the pros and cons of inclusive education for deaf students. The pros logic is social and self-esteem development, language ability improvement and potential ability development, positive peer relationships, educational effects of deaf and non-disabled students, and improved awareness of disabled students. On the other hand, the opposite logic is difficulty in communication, lack of expertise of general teachers, negative perceptions of non-disabled students and passive attitudes of special teachers, lack of learning devices for deaf students, and alienation from remote classes of COVID-19. Second, for the successful inclusive education of deaf students, it is necessary to change the perception of teachers, non-disabled students to deaf students, and to develop the expertise of special teachers and inclusive education homeroom teachers. At the social level, it was proposed that the government and schools need to improve systems such as administration, finance, and device support. [Conclusion] In the inclusive education of deaf students, there is a problem in the gap between ideal and reality. For successful inclusive education, obstacles to reality must be removed. In a school that can be called a small society, we should be able to experience a society that lives together without distinction between disability and non-disability through inclusive education for deaf and non-disabled students.
단결정 실리콘 태양전지용 텍스쳐링 용액의 계면활성제 첨가 효과
강병준(Kang, Byung Jun),권순우(Kwon, Soonwoo),이승훈(Lee, Seung Hun),천승주(Chun, Seungju),윤세왕(Yoon, Sewang),김동환(Kim, Donghwan) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
단결정 실리콘 태양전지 공정에서 이방성 습식 식각 용액을 이용하여 기판 표면에 피라미드 구조를 형성하는 것을 텍스쳐링이라고 한다. 실리콘 기판의 표면을 식각하여 요철구조를 만들어줌으로써 셀 내부로 입사되는 광량을 증가시켜 태양전지의 단락 전류 및 효율 향상 효과를 얻을 수 있다. 일반적인 태양전지 공정에서는 요철구조를 형성할 시 따로 마스크를 사용하지 않으며, 태양전지 급 웨이퍼를 절삭손상층 식각 한 후, 강염기성 용액과 알코올의 혼합용액에 담가서 이방성 식각을 실시하여 요철 구조를 형성한다. 본 연구는 기존의 텍스쳐링 공정에서 사용되는 대표적인 용액인 수산화칼륨(potassium hydroxide, KOH)과 알코올의 혼합용액과 사메틸수산화암모늄(Tetramethylammonium Hydroxide, TMAH)과 알코올의 혼합용액에 Triton X-100 계면활성제를 각각 첨가하여 실험을 진행하였다. 식각된 태양전지용 실리콘 기판의 표면은 주사전자현미경(Scanning Electron Microscope)을 통하여 관찰하였고, 분광광도계(UV/VIS/NIR Spectrophotometer)로 반사도 값을 측정하여 기판의 특성을 평가하였다.
Single Device를 사용한 조도센서용 eFuse OTP IP 설계
에치크 수아드,김홍주,김도훈,권순우,하판봉,김영희,Souad, Echikh,Jin, Hongzhou,Kim, DoHoon,Kwon, SoonWoo,Ha, PanBong,Kim, YoungHee 한국전기전자학회 2022 전기전자학회논문지 Vol.26 No.3
A light sensor chip requires a small capacity eFuse (electrical fuse) OTP (One-Time Programmable) memory IP (Intellectual Property) to trim analog circuits or set initial values of digital registers. In this paper, 128-bit eFuse OTP IP is designed using only 3.3V MV (Medium Voltage) devices without using 1.8V LV (Low-Voltage) logic devices. The eFuse OTP IP designed with 3.3V single MOS devices can reduce a total process cost of three masks which are the gate oxide mask of a 1.8V LV device and the LDD implant masks of NMOS and PMOS. And since the 1.8V voltage regulator circuit is not required, the size of the illuminance sensor chip can be reduced. In addition, in order to reduce the number of package pins of the illumination sensor chip, the VPGM voltage, which is a program voltage, is applied through the VPGM pad during wafer test, and the VDD voltage is applied through the PMOS power switching circuit after packaging, so that the number of package pins can be reduced.
전순일(Jeon, Soonil),최서호(Choi, Seoho),권순우(Kwon, Soonwoo),이규일(Lee, Kyuil),정성진(Jeong, Sungjin),윤성곤(Yun, Seong Gon) 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.06
Hyundai Motor Company developed the second generation of fuel cell hybrid electric vehicle based on Tucson SUV in 2004. This vehicle has cold start capability below -10C and its driving performances including maximum speed and accelerating time are almost similar to conventional Tucson SUV's performances without any sacrifice in terms of cabin space. Especially. the cold start capability was realized by utilizing only internal power sources such as fuel cell power and high voltage lithium ion polymer battery. In this paper, we will briefly introduce specifications of Tucson FCEV and its driving performances based on field test and simulations.
Investigation of Al Back Contact and BSF Formation by In-situ TEM for Silicon Solar Cells
박성은(Park, Sungeun),송주용(Song, Jooyoung),탁성주(Tark, Sung Ju),김영도(Kim, Young Do),최철종(Choi, Chel-Jong),권순우(Kwon, Soonwoo),윤세왕(Yoon, Sewang),김동환(Kim, Donghwan) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
The trend to thinner crystalline silicon solar wafers in production of solar cells investigates re-evolution of back surface field (BSF) formation. We have studied mechanisms of back contact formation in Al evaporation and screen printed Al paste for Si solar cells by TEM analysis. We observed that Si diffuse into Al during heat up. The Si diffusion process made vacancies in Si wafer. The Al began to seep into the Si wafer (Al spike). During heat down, the Al spike were shrink which causes the doped region (BSF).