http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고정휘,박영권,박래수,전종기,김도희,정상철,김상채 한국공업화학회 2015 Journal of Industrial and Engineering Chemistry Vol.32 No.-
Deactivated waste activated carbon due to the deposition of boron in the exhaust gas from an incineratorwas regenerated by the treatment with surfactant, HCl, and NH3. The catalysts were characterized usingBET surface area, ICP, XPS and FT-IR spectra. Sequential treatment with surfactant and HCl removed theadsorbed boron very effectively. NH3 treatment increased the number of functional nitrogen groups inregenerated sample. For NH3 selective catalytic reduction (SCR) of NO, sequential treatments withsurfactant, HCl, and NH3 showed the highest DeNOx activity, attributed to the increased metal removalefficiency, specific surface area and amount of nitrogen functional groups on the surface.
연구 논문 : Mn/CeO2와 Mn/ZrO2 촉매 상에서 NH3를 사용한 NO의 선택적 촉매 산화 반응
고정휘 ( Jeong Huy Ko ),박성훈 ( Sung Hoon Park ),전종기 ( Jong Ki Jeon ),손정민 ( Jung Min Sohn ),이시훈 ( See Hoon Lee ),박영권 ( Young Kwon Park ) 한국공업화학회 2012 공업화학 Vol.23 No.1
본 연구에서는 저온에서 질소산화물 저감효율이 뛰어난 것으로 알려진 망간전구체의 종류에 따른 영향을 고찰하기 위해 초임계수열법으로 합성한 세리아(CeO2)와 지르코니아(ZrO2)를 담체로 하여 저온 SCR 공정에서의 온도에 따른 활성변화를 비교 분석하였다. Manganese acetate (MA)와 Manganese nitrate (MN), 두 종류 망간전구체의 농도를 영향인 자로 고려하여 촉매의 활성변화를 고찰하였다. 활성화된 시료의 특성은 N2 adsorption-desorption, TGA, XRD, XPS를 통해 분석하였고 질소산화물 저감효율을 측정하기 위해 NOx 분석기를 이용하여 De-NOx 실험을 수행하였다. 제조방법에 따라 합성한 촉매의 질소산화물 저감 효율을 분석한 결과 Manganese acetate (MA)를 활성물질로 사용한 촉매가 Manganese nitrate (MN)을 사용한 촉매에 비해 전체적인 온도 영역에서 우수한 질소산화물 저감효율을 보였다. 이는 특성분석 결과를 통해 알 수 있듯이 Manganese acetate (MA)의 주성분인 Mn2O3가 Manganese nitrate (MN)의 주성분인 MnO2에 비해 높은 산소 이동도를 갖고 담체와의 강한 상호작용을 형성하는 것에 기인한 것으로 보인다. Manganese (Mn) catalysts were generated using CeO2 and ZrO2 supports synthesized by the supercritical hydrothermal method and two different Mn precursors, aimed at an application for a low-temperature selective catalytic reduction process. Manganese acetate (MA) and manganese nitrate (MA) were used as Mn precursors. Effects of the kind and the concentration of the Mn precursor used for catalyst generation on the NOx removal efficiency were investigated. The characteristics of the generated catalysts were analyzed using N2 adsorption-desorption, thermo-gravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy. De-NOx experiments were carried out to measure NOx removal efficiencies of the catalysts. NOx removal efficiencies of the catalysts generated using MA were superior to those of the catalysts generated using MN at every temperature tested. Analyses of the catalyst characteristics indicated that the higher NOx removal efficiencies of the MA-derived catalysts stemmed from the higher oxygen mobility and the stronger interaction with support material of Mn2O3 produced from MA than those of MnO2 produced from MN.
초점거리 비가 3:1인 아나모픽 렌즈 열상 광학계 설계
김세진,고정휘,임현선 한국안광학회 2011 한국안광학회지 Vol.16 No.4
Purpose: To design applied anamorphic lens that focal length ratio is 3:1 optical system to improve detecting distance. Methods: We defined a boundary condition as 50o~60o for viewing angle, horizontal direction 36mm, vertical direction 12 mm for focal length, f-number 4, 15 mm15 mm for pixel size and limit resolution 25% in 33l p/mm. Si, ZnS and ZnSe as a materials were used and 4.8 mm, 4.2 mm, 3.7 mm as a wavelength were set. optical performance with detection distance, narcissus and athermalization in designed camera were analyzed. Results: F-number 4, y direction 12 mm and x direction 36 mm for focal length of the thermal optical system were satisfied. Total length of the system was 76 mm so that an overall volume of the system was reduced. Astigmatism and spherical aberration was within .10 which was less than 2 pixel size. Distortion was within 10% so there was no matter to use as a thermal optical camera. MTF performance for the system was over 25% from 33l p/mm to full field so it was satisfied with the boundary condition. Designed optical system was able to detect up to 2.9 km and reduce a diffused image by decreasing a narcissus value from all surfaces except the 4th surface. From sensitivity analysis, MTF resolution was increased on changing temperature with the 5th lens which was assumed as compensation. Conclusions: Designed optical system which used anamorphic lens was satisfied with boundary condition. an increasing resolution with temperature, longer detecting distance and decreasing of narcissus were verified. 목적: 초점거리의 비가 3:1인 아나모픽 렌즈를 적용하여 탐지거리를 증대시키는 열상 광학계를 설계하였다. 방법: 화 각이 50o~60o, 초점거리는 수평방향 36 mm, 수직방향 12 mm로 구속조건을 정하였다. 구속조건으로 f-number는 4, 화소 크기는 15 mm15 mm, 한계 분해능은 33l p/mm에서 25% 이상으로 제한하였다. 재질은 Si, ZnS, ZnSe를 사 용하였으며 파장영역은 4.8 mm, 4.2 mm, 3.7 mm로 설정하였다. 설계한 열상 카메라의 광학적 성능 및 탐지거리와 나르시서스, 비열화를 분석하였다. 결과: 열상 광학계의 초점거리는 Y축 방향이 12 mm, X축 방향이 36 mm를 만 족하였으며 f-number는 4를 만족하였다. 전장의 길이는 76 mm로 시스템의 전반적인 부피를 감소시켰다. 구면수차 와 비점수차는 ±0.10내로 2 pixel 크기보다 작게 나타났다. 왜곡수차는 10%이내로써 열상 카메라로 사용하는데 문 제가 없음을 확인하였다. 광학계 MTF 성능은 33l p/mm에서 full field 까지 25%이상으로 구속조건을 만족하였다. 설계된 열상 광학계는 2.9 km까지 탐지할 수 있으며 4면을 제외한 나머지 면들의 나르시서스 값을 줄여 상 번짐이 감소하였다. 민감도 분석을 통해 5번째 렌즈를 보상자로 선택하여 온도 변화에 따른 MTF 해상력을 높였다. 결론: 아나모픽 렌즈를 적용해서 설계한 열상 광학계의 광학적 성능은 구속조건을 만족하였으며 더 긴 탐지거리와 나르 시서스의 감소, 온도에 따른 해상력이 증가됨을 확인하였다.