http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연속적 열분해 공정을 위한 Rotary-kiln reactor의 적용
박영권,김지희,정재훈 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
화석연료의 사용의 증가 및 환경적 문제로 인해, 바이오매스 열분해 공정을 통해 얻은 친환경적인 연료생산 기술에 대한 관심이 높아지고 있다. 그 중 Lignin의 급속 열분해를 통해 얻은 액체 연료의 경우 타 기술에 비해 경제적인 기술로 평가받고 있다. 그러나 Lignin의 급속열분해시 발생하는 plugging, lignin agglomeration, char foaming 등의 문제점이 발생한다. 본 연구에서는 Lignin의 연속적인 열분해가 이루어질 수 있도록 하여 높은 품질의 열분해 생성물을 얻고자 하였다. 따라서 로타리 킬른형 반응기의 제작 및 최적화를 통해 열분해 실험을 진행하였으며, 열분해 반응기 내에 알루미나볼을 투입하여 반응이 진행되는 동안 char foaming 현상을 억제하고자 하였다. 또한, Lingin 투입 및 반응기 내에서의 원활한 이동을 위해 투입각도 및 거리, 유량, 반응기 배치조건 등을 최적화하여 연속적인 반응이 이루어질 수 있도록 하였다.
초음파 파쇄기를 사용하여 디젤과 에테르 추출 바이오오일의 에멀젼화
박영권,황유진,( Abid Farooq ),정재훈 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
열분해로 얻어진 바이오오일은 높은 점도와 산도 및 많은 양의 수분으로 인하여 바로 엔진에서 사용되어지지 않는다. 엔진에 사용되기 위해서는 에멀젼화 기술을 이용하여 디젤과 혼합해서 사용되어야 한다. 따라서 본 연구에서는 Oak 톱밥을 450°C에서 열분해하여 얻어진 바이오오일을 중유, 경유 및 에테르 추출 오일로 분리하였고 그 중에서 낮은 점도와 적은 수분량을 가진 에테르 추출 오일을 디젤과의 에멀젼화에 이용하였다. 에테르 추출 오일의 에멀젼화는 초음파 파쇄기를 사용하여 진행되었으며 초음파의 출력, HLB 값, 유화제 양, 온도 및 바이오오일과 디젤 비율과 같은 여러 조건을 가지고 실험을 진행하여 안정성을 테스트하였다. <sup>**</sup> 이 논문은 2017년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원의 지원을 받아 수행된 연구임(No. 20173010092430).
박영권,박현성 한국분자세포생물학회 2012 Molecules and cells Vol.33 No.6
DEC1 is a transcription repressor that is induced by Hy-poxia-Inducible Factor-/ (HIF-/). In this study, we found that either hypoxic treatment or ectopic expression of DEC1 blocks induction of a master adipogenic transactivator, peroxisome proliferative activated receptor-2 (PPAR2) in 3T3-L1 cells. DEC1 did not prevent C/EBP, which is an upstream transactivator for PPAR2, from occupying the PPAR2 promoter. DEC1 occupied the PPAR2 promoter by interacting with DNA-bound C/EBP. DEC1 occupancy was accompanied by a reduction of acetylated histones and an increase in histone deacetylase 1 (HDAC1) occupancy on the PPAR2 promoter. Based on the fact that DEC1 interacts with HDAC1, this study suggests that DEC1 blocks adipogenesis by reinforcing HDAC1 recruitment to the PPAR2 promoter. This study implies that DEC1 is one of the mediators that reset the pattern of PPAR2 expression in response to hypoxia.
Conversion of Cellulose over Ni Loaded Mesoporous MSU-F Catalysts via Air Gasification
박영권,박경선,김성수,박성훈,정상철,김상채,전종기,전기준 대한화학회 2014 Bulletin of the Korean Chemical Society Vol.35 No.11
Catalytic gasification of cellulose was carried out in a U-type fixed reactor with Ni loaded MSU-F catalyst (Ni/ MSU-F) and Ni loaded γ-Al2O3 (Ni/γ-Al2O3). The characteristics of the catalysts were analyzed by using X-ray diffraction, H2-temperature programmed reduction, and Brunauer-Emmett-Teller analyses. The operation conditions of catalytic gasification reactions were 750 oC and 0.2 equivalence ratio. Air was used as gasification agent. Catalytic gasification characteristics, such as gas yield and gas composition (H2, CO, CO2, C1-C4), were measured and calculated. The gas yield of Ni/MSU-F was much higher than that of Ni/γ-Al2O3. Especially high amount of hydrogen was produced by Ni/MSU-F.
P-981 : Catalytic pyrolysis of biomass using bubbling fluidized bed
박영권,박현주,명소영,전종기,유경선 한국화학공학회 2007 화학공학의이론과응용 Vol.10 No.2
Bio-oils obtained by pyrolysis of biomass, which is a renewable, CO2 neutral energy resource, can not be directly used as regular fuels due to their poor heating value, high viscosity, corrosiveness and instability. Catalytic pyrolysis of biomass using bubbling fluidized bed, therefore, was carried out with different catalysts(HZSM-5, HY) to obtain lighter hydrocarbons in gasoline-range. The product yields(oil, gas, char) of non-catalytic and catalytic pyrolysis were compared respectively. Also, the products were characterized with GC, GC-MS, Elemental Analyzer and FT-IR.