http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김정환,임창형,박응복,Kim Jung-Hwan,Lim Chang-Hyeong,Bak Ung-Bok 한국임상수의학회 1986 한국임상수의학회지 Vol.3 No.1
Pathological study was made of 173 gallbladders among 652 slaughter pigs. The size and the pH of the bile juice were made of 50 among 173 gallbladders with lesions and 50 normal gallbladders as control. The results are summerized as follows : 1. The histological lesions were shown hyperemia and congestion(83.2%), Iymphocytic infiltration(37.5%), Iympoid hyperplasia(27%), epithelial downgrowth(27%), erosion and ulcer(22%), papillary hyperplasia (20.2%), pericholecystic edema(19.5%), hemorrhage(11%), and leukemic cell infiltration(0.6%). 2. In the gallbladders with lesions mean size was 4.26${\times}$7.88cm in diameter and mean pH is 7.2. In the control means size and mean pH were 4.57${\times}$8.13cm in diameter and 7.1. The difference of size between gallbladders with lesions and these as control was not statistically significant. The pH of bile juice between two showed also no statistically significant difference.
고상법에 의한 100 nm BaTiO<sub>3</sub> 분말의 합성
김정환,정한승,조준엽,홍정오,김영태,허강헌,Kim, Jung-Hwan,Jung, Han-Seong,Cho, Joon-Yeob,Hong, Jeong-Oh,Kim, Young-Tae,Hur, Kang-Heon 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.2
$BaTiO_3$ powder was synthesized by the solid-state reaction of fine $BaTiO_3$ and $TiO_2$ raw materials. Fine grinding media of 50 and 300 microns were used for obtaining fine particulate mixture of $BaTiO_3$ and $TiO_2$ with high homogeneity. Effect of the size of grinding media on the synthesis mechanism of $BaTiO_3$ was discussed on the basis of the particulate morphology and thermogravimetry data for the mixture powders. By using the finer grinding media, $BaTiO_3$ was formed at the lower temperature and the particle size with the relatively narrower distribution could be obtained. $BaTiO_3$ powder with the average size of 100 nm was synthesized by the solid reaction in vacuum atmosphere.
산 완충능력과 토양 성분이 동전기-펜톤 공정에 의한 phenanthrene 오염토양 정화에 미치는 영향
김정환,나소정,박주양,변영덕,Kim, Jung Hwan,Na, So Jeong,Park, Joo Yang,Byun, Young Deog 한국지하수토양환경학회 2013 지하수토양환경 Vol.18 No.1
This research was conducted to investigate effects of acid buffering capacity and soil component in treatment of phenanthrene using electrokinetic-Fenton process. In Hadong clay of high acid buffering and low iron oxide content, it was difficult to oxidize phenanthrene due to shortage of iron catalyst and scavenger effect of carbonate minerals. The desorbed phenanthrene conductive to Fenton oxidation was transported toward cathode by electroosmotic flow. However, in Youngdong illitic clay, oxidation of phenanthrene near anode readily occurred compared to Hadong clay due to high iron content and low acid buffering capacity.
50μm급 이트리아 안정화 지르코니아 비드의 미세구조 및 마모 조건에 따른 마모율 분석
김정환,윤세중,한병동,안철우,윤운하,최종진,Kim, Jung-Hwan,Yoon, Sae-Jung,Hahn, Byung-Dong,Ahn, Cheol-Woo,Yoon, Woon-Ha,Choi, Jong-Jin 한국재료학회 2019 한국재료학회지 Vol.29 No.4
This study analyzes the mechanical properties, including the attrition rate, of $50{\mu}m$ size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grain-boundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of $50{\mu}m$ YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than $BaTiO_3$ powder (Hv ~315).
한글 문자 입력 인터페이스 개발을 위한 눈-손 Coordination에 대한 연구
김정환,홍승권,명노해,Kim, Jung-Hwan,Hong, Seung-Kweon,Myung, Ro-Hae 대한인간공학회 2007 大韓人間工學會誌 Vol.26 No.2
Recently, various devices requiring text input such as mobile phone IPTV, PDA and UMPC are emerging. The frequency of text entry for them is also increasing. This study was focused on the evaluation of Korean text entry interface. Various models to evaluate text entry interfaces have been proposed. Most of models were based on human cognitive process for text input. The cognitive process was divided into two components; visual scanning process and finger movement process. The time spent for visual scanning process was modeled as Hick-Hyman law, while the time for finger movement was determined as Fitts' law. There are three questions on the model-based evaluation of text entry interface. Firstly, are human cognitive processes (visual scanning and finger movement) during the entry of text sequentially occurring as the models. Secondly, is it possible to predict real text input time by previous models. Thirdly, does the human cognitive process for text input vary according to users' text entry speed. There was time gap between the real measured text input time and predicted time. The time gap was larger in the case of participants with high speed to enter text. The reason was found out investigating Eye-Hand Coordination during text input process. Differently from an assumption that visual scan on the keyboard is followed by a finger movement, the experienced group performed both visual scanning and finger movement simultaneously. Arrival Lead Time was investigated to measure the extent of time overlapping between two processes. 'Arrival Lead Time' is the interval between the eye fixation on the target button and the button click. In addition to the arrival lead time, it was revealed that the experienced group uses the less number of fixations during text entry than the novice group. This result will contribute to the improvement of evaluation model for text entry interface.
새로운 BF<sub>2</sub>-Chelate 화합물들의 합성
김정환,김영은,Kim, Jung-Hwan,Kim, Yeung-Eun 대한화학회 2004 대한화학회지 Vol.48 No.4
$BF_2$-chelate 형태의 4-pyrimidylideneacetonitrile 유도체들은 4-pyrimidylideneacetonitrile 유도체들의 H-chelate 화합물들과 boron trifluoride diethyl etherate를 반응시켜 얻을 수 있었다. 또 이들 H-chelate 화합물들은 2-cyanomethylpyridine 유도체들에 여러가지 친전자체들 즉 4,6-dichloropyrimidine, 4,6-dichloro-2-methylpyrimidine, 4,6-dichloro-2-heptadecylpyrimidine, 4,6-dichloro-2-phenylpyrimidine, 4,6-dichloro-5-phenylpyrimidine 그리고 4,6-dichloro-2,5-diphenylpyrimidine을 친전자성 치환반응시켜 만들었다. 화합물에 대한 구조는 분광학적인 방법으로 분석하였다. 4-pyrimidylideneacetonitrile derivatives containing $BF_2$-chelate have been synthesized from H-chelates of 4-pyrimidylideneacetonitrile derivatives and boron trifluoride diethyl etherate. These H-chelates were prepared by the electrophilic substitution of 2-cyanomethylpyridine derivatives with electrophiles such as 4,6-dichloropyrimidine, 4,6-dichloro-2-methylpyrimidine, 4,6-dichloro-2-heptadecylpyrimidine, 4,6-dichloro-2-phenylpyrimidine, 4,6-dichloro-5-phenylpyrimidine and 4,6-dichloro-2,5-diphenylpyrimidine. Structures of the target molecules were identified by spectra methods.
The Binarization of Text Regions in Natural Scene Images, based on Stroke Width Estimation
김정환,이귀상,Zhang, Chengdong,Kim, Jung Hwan,Lee, Guee Sang 한국스마트미디어학회 2012 스마트미디어저널 Vol.1 No.4
In this paper, a novel text binarization is presented that can deal with some complex conditions, such as shadows, non-uniform illumination due to highlight or object projection, and messy backgrounds. To locate the target text region, a focus line is assumed to pass through a text region. Next, connected component analysis and stroke width estimation based on location information of the focus line is used to locate the bounding box of the text region, and each box of connected components. A series of classifications are applied to identify whether each CC(Connected component) is text or non-text. Also, a modified K-means clustering method based on an HCL color space is applied to reduce the color dimension. A text binarization procedure based on location of text component and seed color pixel is then used to generate the final result.