http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주파수 영역 적응 디지탈 필터를 이용한 Magnitude-Squared Coherence 함수 추정
김도년,차일환,윤대희,Kim, D.N.,Cha, I.W.,Youn, D.H. 한국음향학회 1988 韓國音響學會誌 Vol.7 No.2
한 쌍의 주파수 영역 적응 디지탈 필터를 이용하여 두 신호간의 magnitude squared coherence(MSC) 함수를 추정하는 방법을 제안하였다. 이와 같은 방법은 시간 영역에서 한 쌍의 적응디지탈 필터를 이용하는 LMS-MSC(least mean square-MSC)알고리즘에 비하여 적은 양의 계산으로 MSC 함수를 구할 수 있다. MSC함수 추정을 위하여 대표적인 주파수 영역 적응 필터링 알고리즘인 CFLMS(constrained frequency-domain LMS)와 UFLMS (unconstrained frequency-domain LMS)알고리즘을 사용하였으며, 컴퓨터 시뮬레이션을 통하여 LMS-MSC 알고리즘과 성능을 비교하였다. It is proposed to use a pair of frequency-domain adaptive digital filters to estimate the magnitude squared coherence (MSC) functions of two signals. Such a method requires less computations than the LMS-MSC algorithm in which the least mean square (LMS) algorithm is applied in the time domain to compute the coefficients of a pair of adaptive digital filters. The frequency-domain adaptive digital filtering algorithms considered in this paper include the constrained frequency domain LMS (CFLMS) and the unconstrained frequency domain LMS (UFLMS) algorithms. The performance of the proposed methods are compared with those of the LMS-MSC algorithm.
김도년,윤범식,최윤식,Kim, Do-Nyeon,Yun, Beom-Sik,Choe, Yun-Sik 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.43 No.2
디지털 캠코더에서 이용하는 영상 압축 방식인 DY 부호화 방식은 DCT와 가변장 부호화 방식을 이용한다. DV 방식은 하드웨어 복잡도가 낮은 반면 압축된 비트율이 악 26Mb/s로 높은 편이다. 따라서 스튜디오에서 낮은 복잡도로 영상을 부호화 한 후 VOD 시스템에 이용하기 위하여 MPEG-2로 변환부호화 할 필요가 있다. 이때의 두 압축방식이 DCT를 이용하므로, DCT 영역에서 변환부호화 하면 중간 과정을 줄일 수 있어서 계산상의 복잡도를 줄일 수 있다. DV 방식에서 MPEG-2 인트라로 변환부호화 시에, DV 방식의 4:1:1 색차 포맷을 MPEG-2의 4:2:2 영상 포맷으로 변환할 때 와 2-4-8 DCT 모드에서 8-8 DCT 모드로 변환 시 변환 영역에 있는 데이터에 미리 계산된 행렬을 곱함으로써 병렬처리가 가능하게 하였다. MPEG-2 율제어 시에 서브 블록의 분산을 완전히 DCT 영역에서 계산하였다. 실험을 통하여 제안한 방식들을 검증하였다. MPEG-2 인터 프레임 부호화로 변환 부호화 할 때 DCT 계수를 이용하여 계층적으로 움직임을 추정하였다. 먼저 4개의 서브 블록에 있는 4개의 DC 값으로 하나의 매크로 블록에 대한 움직임을 추정한 다음 각 서브 블록의 저주파수에 해당하는 2×2에 IDCT를 취하여 16 포인트로 구성된 매크로 블록을 만든 후 이에 대한 움직임을 추정하며, 다섯 번째 단계에서 서브 화소에 대한 움직임을 추정함으로써 움직임 추정을 마친다. 탐색영역을 겹치는 방식이 겹치지 않는 방식보다 좋은 PSNR값을 보여 주었다. Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.