http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
鄭英暢,許敏旭 湖西大學校 工業技術硏究所 1991 工業技術硏究所論文集 Vol.10 No.-
The objectives of this study are to find out the characteristics of the ceramic heater, and to utilize them in developing other kind of semicoductor that will be used as heating materials. The characteristics of the current-voltage in P. T. C. are in accorance with the change of hyperbolic curves, and the characteristics of the voltage-temperature are saturated and equilibrated at 60[V]- 70[V]. About two minutes later, the ceramic heater operates normally as a heater. The ceramic heater is consmed with less power than any other kind of the heater. However, the effect of heat in the heater is as much as othc heaters, and it is safe enough from a fire caused by over heating. There is no noise and no poisonous gas when the fuel is burning. But, the cell of ceramic is not so easy to manufacture, and that is the problem we have to solve in the future.
대중교통 카드 데이터를 이용한 서울시 대중교통 통행특성 분석
허민욱(Heo, Min-Uk),도화용(Do, Hwa-Yong),원제무,박준환(Park, Jun-Hwan),김순관(Soon Gwan Kim) 대한교통학회 2007 대한교통학회 학술대회지 Vol.57 No.-
현대 도시교통에서 있어서 대중교통의 중요성이 증대됨에 따라 대중교통 통행패턴에 대한 연구가 주목되고 있다. 그러나 대중교통 이용자의 통행특성을 충분히 설명할 수 있는 대중교통 통행특성 분석에 관한 연구는 아직 미흡한 것이 사실이다. 2004년부터 통합 대중교통 거리비례 요금제가 시행됨에 따라 카드데이터의 활용이 증대되고 있다. 즉, 대중교통 통행특성 분석 및 정책분석의 기초자료를 카드데이터 분석을 통해 얻을 수 있는 토대가 마련된 것이다.
강섬유를 사용한 철근콘크리트 보-기둥 접합부의 내진 성능
허민욱(Heo Min-Wook),김우석(Kim Woo-Suk),권우현(Kwon Woo-Hyun),김성기(Kim Sung-Ki),신종학(Shin Jong-Hack),곽윤근(Kwak Yoon-Keun) 대한건축학회 2009 大韓建築學會論文集 : 構造系 Vol.25 No.4
This paper deals with the earthquake-resistant capacity of reinforced concrete beam-column joints with steel fiber. Eight beam-column joint specimens (including control specimen) were experimentally evaluated to determine improvements in earthquake-resistant capacity. Test parameters in this experimental study are concrete compressive strength (24, 59 MPa) and volume ratio of steel fiber (0, 0.3, 0.6, 1%). RC beam-column joint specimens were tested under reversed lateral cyclic load. Considering concrete compressive strength and volume ratio of steel fiber, maximum strength, initial stiffness, shear strength and energy dissipation capacity of test specimens were evaluated. The results show that the earthquake-resistant capacity of specimens with steel fiber improve than that of specimen without steel fiber. and we did compare experiment results with ACI352R-02 and Tang`s equation.
소형위성 탑재용 L-band 영상레이더 시스템 설계 및 PDDS Chirp 신호 발생기 개발
정해원,안진홍,김경록,김영득,허민욱,김재현,양희인,Josaphat Tetuko Sri Sumantyo,김두환 한국항공우주학회 2015 한국항공우주학회 학술발표회 논문집 Vol.2015 No.4
영상레이더는 전천후로 광범위한 지역에 대해 영상 획득이 가능한 능동형 센서로서, 군수분야는 물론 민수분야의 과학 및 상업용으로 그 활용범위가 점차 확대되고 있다. 현재까지 영상레이더가 탑재된 위성들은 무게가 톤 급에 달하고, 개발 기간과 소요 경비가 상당하다. 따라서 소형위성에 영상레이더를 탑재하여 개발 기간 및 비용을 줄일 수 있는 소형 및 경량화에 대한 연구가 필수적이다. 본 논문에서는 소형위성용 L-band 영상레이더 시스템 설계 방안과 임무 및 요구조건을 만족하는 설계 변수를 도출하고, 영상레이더 시스템의 핵심기능을 담당하는 chirp 신호 발생기를 디지털 방식 중의 하나인 DDS로 설계하였다. SAR (synthetic aperture radar) is an active sensor that can obtain the high resolution images of a target regardless of the weather and light conditions. The applications of SAR are expanding such as military purpose and scientific or commercial purpose of civilian. Conventional satellite on-board SAR can weigh up to tons. Also It require a large amount of money and long time of development process. Therefore, the research on the minimization and light weight platform is essential to reduce the budget and the time cost of development of small satellite on-board SAR. This paper estimates design parameter that is suitable for mission, requirement, and L-band SAR system design for micro satellite and implements chirp signal generator that is core function of SAR system to DDS.
CFRP를 이용한 비내진 철근콘크리트 보-기둥 접합부의 내진 보강
전용광,배덕화,김경주,허민욱,곽윤근 대한건축학회지회연합회 2008 대한건축학회지회연합회 학술발표대회논문집 Vol.2008 No.1
hear failures in the beam-column joint area and it may resulted in large structural collapse. In this study, experimental investigations into the performance of reinforced concrete beam-column joints strengthened with the carbon fiber-reinforced polymer(CFRP) were presented. The CFRP sheets were applied to the RC beam-column joint area with different configurations to determine the effective way to improve structural performances of joints. Based on the experimental study, it was concluded that the CFRP retrofit for the RC beam-column joints would be an effective way to provide the significant improvement of flexural capacity and ductility for the RC beam-column joints designed with non-seismic details.