http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
금속 코팅된 흑연 입자로 제조된 전극의 전기화학적 특성
최원창,이중기,변동진,조병원,Choi, Won-Chang,Lee, Joong-Kee,Byun, Dong-Jin,Cho, Byung-Won 한국전기화학회 2003 한국전기화학회지 Vol.6 No.2
리튬이차전지 음극활물질로 사용되는 합성흑연입자에 여러종류금속을 코팅하여 그 전기화학적특성을 조사하였으며, 구체적인 코팅방법으로는 가스분산스프레이 코팅법을 적용하였다. 본 연구범위내에서 금속을 코팅한 입자로 제조된 전극은 충방전시 형성되는 계면저항을 감소시킴으로서 결과적으로 원시료에 비해서 높은 방전용량을 나타내었다. CV실험을 통해서 은과 주석은 리튬과의 합금반응을 확인할 수 있었으나, 2.5 중량$\%$ 이하의 낮은 코팅량을 고려했을 때, 높은 분산도를 지닌 금속 물질의 코팅을 통한 전극 활물질 표면의 균일한 전도도의 증가가 주요원인인 것으로 사료되었다. 단일계 금속으로 코팅하였을 경우 은코팅한 전극활물질이 가장 높은 방전용량과 사이클특성을 나타내었고, 은을 기본으로 하는 이성분계에서는 은-니켈전극이 가장 높은 고율특성을 나타내었다. Various kinds of metals were coated on synthetic graphite in order to investigate the relationship between film characteristics and their electrochemical performance. Gas suspension spray coating method was employed for the coating of synthetic graphite. In our experimental range, all of the metal coated synthetic graphite showed the higher capacity than that of raw material at high C-rate mainly due to decrease in impedance of passivation film. In cyclic voltammetry experiments, silver-coated and tin-coated graphite anodes found the lithium-alloy reaction. Considering smaller amount of metal coating, the most increase in discharge capacity was caused by improvement of conductivity of the electrode. When single-component metal was coated, silver-coated graphite anode exhibited the highest discharge capacity and better cycleability. Double components of silver-nickel coated active material showed the highest discharge capacity, rate capability and the best cycle performance in the range of our experiments.
Design of Feedback Control for Quadrotors Considering Signal Transmission Delays
최원창,Stephen K. Armah,Sun Yi 제어·로봇·시스템학회 2016 International Journal of Control, Automation, and Vol.14 No.6
For quadrotor types of unmanned aerial vehicles (UAVs), existence of transmission delays caused bywireless communication is one of the critical challenges. Estimation of the delays and analysis of their effectsare not straightforward for designing controllers. An estimation method is introduced using experimental data andanalytical solutions of delay differential equations (DDEs). Collected altitude responses in the time domain arecompared to the predicted ones obtained from the analytical solutions. The Lambert W function-based approachfor first-order DDEs is used for such analysis. The dominant characteristic roots among infinite number of rootsare obtained in terms of coefficients and the delay. The effects of the time delay on the responses are analysedthrough the locations of the characteristic roots in the complex plane. Based on the estimation result, proportionalplus velocity controllers are proposed to improve transient altitude responses.
Spray Pyrolysis에 의한 Manganese Oxide 입자의 제조 및 전기화학적 특성
최원창,변동진,이중기,박달근,김현중,Choi, Won-Chang,Byun, Dong-Jin,Lee, Jung-Kee,Park, Dal-Keun,Kim, Hyeon-Joong 한국재료학회 2001 한국재료학회지 Vol.11 No.11
Spray pyrolysis is a favorable technique to form complex mixed-metal oxide powders with high purity in high temperature region. Manganese oxide powders were prepared by spray pyrolysis from an aqueous solution of $Mn(NO_3)_2$. Powders were formed in the temperature range of 500~$700^{\circ}C$ under the constant pressure of 300torr. All the powders have hydrous forms. When the temperature was increased, the size and the surface area of the particles decreased. An electrochemical capacitors were made with manganese oxide electrodes and KOH electrolyte. With the temperature decreased, capacitors showed high capacitance. Capacitor which was prepared with powders formed in the temperature $500^{\circ}C$ demonstrated specific capacitances as high as 83F/g.
최근 충북지역에서 분리된 Gram 양성 세균종과 항생물질의 감수성 양상
황석연,최원창 THE KOREAN SOCIETY FOR BIOMEDICAL LABORATORY SCINE 1999 Journal of biomedical laboratory sciences Vol.5 No.2
임상검체에서 분리되는 병원균을 주기적으로 분석하고 이에 대한 항균제 감수성의 변화 양상을 파악하는 것은 임상에서의 적절한 항균제의 선택이나 내성균의 감독과 조절을 위해 필수적이라 할 수 있다. 저자들은 충북대학병원에 1996년 1년간 내원 환자의 미생물 배양 검사에서 분리, 동정된 1,689 균주중 Gram양성인 542 균주의 분리 빈도 및 주요 균종에 대하여 항생제 감수성 양상을 조사하였다. Gram 양성 균종은 S. aureus, S. pneumoniae, S. epidermidis, S. hemolyticus, coagulase negative Staphylococcus (CNS), Enterococcus faecalis 순으로 분리되었다. 한편, 항생제 감수성 시험 결과 S. aureus의 항생제 감수성은 penicillin과 gentamicin에 대한 저항성이 현저히 높았으며, teicoplanin과 vancomycin(MlC50 0.5㎍/ml)에 감수성이 높은 것으로 나타났다. CNS의 경우도 S. aureus와 대동 소이한 결과를 보였으나, S. epidermidis의 경우에는 ciprofloxacin과 clindamycin에 감수성이 높은 것으로 나타났다. Enterococcus spp.는 vancomycin, penicillin, tetracycline 등에 저항성 이 매우 높았으며, 검사한 모든 항생제에 대하여 대부분의 감수성이 zig-zag pattern을 보였다. In order to control resistant strains and to properly select the antimicrobial agents, it is of quite importance to know current trends of bacterial species and changing patterns of antimicrobial resistance rates. The authors studied the results of 542 Gram-positive strains among 1,689 strains isolated at Chung-buk National University Hospital in 1996. The frequently isolated Gram-positive microorganisms were Staphylococcus aureus, Streptococcus, pneumoniae, Staphylococcus epidermidis and Enterococcus faecalis in descending order. S. aureus showed high resistance to penicillin, gentamicin, and susceptibility to teicoplanin and vancomycin. Coagulase negative Staphylococcus was highly resistant to all of the antibiotics used in this experiment except teicoplanin and vancomycin. Enterococcus were highly resistant to vancomycin, penicillin and tetracycline. MIC of Gram- positive oaganisms was appeared to be zig-zag pattern.
최원창,윤현도,이재연 한국구조물진단유지관리공학회 2012 한국구조물진단유지관리공학회 논문집 Vol.16 No.3
바이오매스에서 얻어지는 바이오차는 토질 개량제와 탄소 격리제로 제한적인 분야에서 성공적으로 사용되고 있다. 현재 산업전반에서 CO2 에 의한 환경에 부정적인 영향을 완화시키고 지속가능성을 증진시키기 위한 연구가 활발히 진행되고 있다. 이에 본 연구에서는 고탄소 바이오차를 탄소 격리제 또는 시멘트의 혼화재로써 활용 가능성을 평가하고자 하였다. 견목재에서 얻어진 바이오차를 혼화재로 사용하여 시멘트 배합조건을 달리하면서 모타르의 압축강도, 마이크로구조, 압축강도, 유동성, 중량감소와 같은 화학적, 물리적 재료성질을 평가하였다. 또한 플리이애쉬를 사용한 모르타르의 역학적 특성과 비교 평가하였다. Bio-char, obtained from biomass as a by-product of the pyrolysis process, is used successfully as a soil amendment and carbon sequester in this limited study. Recent and active research from literatures has extended the application of bio-char in the industry to promote sustainability and help mitigate the negative environmental impacts caused by carbon emissions. This study aims to investigate the feasibility of high-carbon bio-char as a carbon sequester and/or admixture in mortar and concrete to improve the sustainability of concrete. This paper presents the experimental results of an initial attempt to develop a cement admixture using bio-char. In particular, the effects of the water retention capacity of bio-char in concrete are investigated. The chemical and mechanical properties (e.g., the chemical components, microstructure, concrete weight loss, compressive strength and mortar flow) are examined using sample mortar mixes with varying replacement rates of cement that contains hardwood bio-char. The experimental results also are compared with mortar mixes that contain fly ash as the cement substitute.