Crystal growth from melt in combined heater-magnet modules

Rudolph, P.,Czupalla, M.,Dropka, N.,Frank-Rotsch, Ch.,KieBling, F.M.,Klein, O.,Lux, B.,Miller, W.,Rehse, U.,Root, O. The Korea Association of Crystal Growth 2009 韓國結晶成長學會誌 Vol.19 No.5

Many concepts of external magnetic field applications in crystal growth processes have been developed to control melt convection, impurity content and growing interface shape. Especially, travelling magnetic fields (TMF) are of certain advantages. However, strong shielding effects appear when the TMF coils are placed outside the growth vessel. To achieve a solution of industrial relevance within the framework of the $KRISTMAG^{(R)}$ project inner heater-magnet modules(HMM) for simultaneous generation of temperature and magnetic field have been developed. At the same time, as the temperature is controlled as usual, e.g. by DC, the characteristics of the magnetic field can be adjusted via frequency, phase shift of the alternating current (AC) and by changing the amplitude via the AC/DC ratio. Global modelling and dummy measurements were used to optimize and validate the HMM configuration and process parameters. GaAs and Ge single crystals with improved parameters were grown in HMM-equipped industrial liquid encapsulated Czochralski (LEC) puller and commercial vertical gradient freeze (VGF) furnace, respectively. The vapour pressure controlled Czochralski (VCz) variant without boric oxide encapsulation was used to study the movement of floating particles by the TMF-driven vortices.

Identification of new SLE-associated genes with a two-step Bayesian study design

Armstrong, D L,Reiff, A,Myones, B L,Quismorio Jr, F P,Klein-Gitelman, M,McCurdy, D,Wagner-Weiner, L,Silverman, E,Ojwang, J O,Kaufman, K M,Kelly, J A,Merrill, J T,Harley, J B,Bae, S-C,Vyse, T J,Gilkeso Macmillan Publishers Limited 2009 GENES AND IMMUNITY Vol.10 No.5

In our earlier study, we utilized a Bayesian design to probe the association of ∼1000 genes (∼10 000 single-nucleotide polymorphisms (SNPs)) with systemic lupus erythematosus (SLE) on a moderate number of trios of parents and children with SLE. Two genes associated with SLE, with a multitest-corrected false discovery rate (FDR) of <0.05, were identified, and a number of noteworthy genes with FDR of <0.8 were also found, pointing out a future direction for the study. In this report, using a large population of controls and adult- or childhood-onset SLE cases, we have extended the earlier investigation to explore the SLE association of 10 of these noteworthy genes (109 SNPs). We have found that seven of these genes exhibit a significant (FDR<0.05) association with SLE, both confirming some genes that have earlier been found to be associated with SLE (PTPN22 and IRF5) and presenting novel findings of genes (KLRG1, interleukin-16, protein tyrosine phosphatase receptor type T, toll-like receptor (TLR)8 and CASP10), which have not been reported earlier. The results signify that the two-step candidate pathway design is an efficient way to study the genetic foundations of complex diseases. Furthermore, the novel genes identified in this study point to new directions in both the diagnosis and the eventual treatment of this debilitating disease.Genes and Immunity (2009) 10, 446–456; doi:10.1038/gene.2009.38; published online 14 May 2009

Gas Exchanges and Dehydration in Different Intensities of Conditioning in Tifton 85 Bermudagrass: Nutritional Value during Hay Storage

Pasqualotto, M.,Neres, M.A.,Guimaraes, V.F.,Klein, J.,Inagaki, A.M.,Ducati, C. Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.6

The present study aimed at evaluating the intensity of Tifton 85 conditioning using a mower conditioner with free-swinging flail fingers and storage times on dehydration curve, fungi presence, nutritional value and in vitro digestibility of Tifton 85 bermudagrass hay dry matter (DM). The dehydration curve was determined in the whole plant for ten times until the baling. The zero time corresponded to the plant before cutting, which occurred at 11:00 and the other collections were carried out at 8:00, 10:00, 14:00, and 16:00. The experimental design was randomised blocks with two intensities of conditioning (high and low) and ten sampling times, with five replications. The high and low intensities related to adjusting the deflector plate of the free iron fingers (8 and 18 cm). In order to determine gas exchanges during Tifton 85 bermudagrass dehydration, there were evaluations of mature leaves, which were placed in the upper middle third of each branch before the cutting, at every hour for 4 hours. A portable gas analyser was used by an infrared IRGA (6400xt). The analysed variables were photosynthesis (A), stomatal conductance (gs), internal $CO_2$ concentration (Ci), transpiration (T), water use efficiency (WUE), and intrinsic water use efficiency (WUEi). In the second part of this study, the nutritional value of Tifton 85 hay was evaluated, so randomised blocks were designed in a split plot through time, with two treatments placed in the following plots: high and low intensity of cutting and five different time points as subplots: cutting (additional treatment), baling and after 30, 60, and 90 days of storage. Subsequently, fungi that were in green plants as well as hay were determined and samples were collected from the grass at the cutting period, during baling, and after 30, 60, and 90 days of storage. It was observed that Tifton 85 bermudagrass dehydration occurred within 49 hours, so this was considered the best time for drying hay. Gas exchanges were more intense before cutting, although after cutting they decreased until ceasing within 4 hours. The lowest values of acid detergent insoluble nitrogen were obtained with low conditioning intensity after 30 days of storage, 64.8 g/kg DM. The in vitro dry matter of Tifton 85 bermudagrass did not differ among the storage times or the conditioning intensities. There was no fungi present in the samples collected during the storage period up to 90 days after dehydration, with less than 30 colony forming units found on plate counting. The use of mower conditioners in different intensities of injury did not speed up the dehydration time of Tifton 85.

Stroke Severity Score based on Six Signs and Symptoms The 6S Score: A Simple Tool for Assessing Stroke Severity and In-hospital Mortality

Juan Manual Racosta,Federico Di Guglielmo,Francisco Ricardo Klein,Patricia Mariana Riccio,Francisco Muñoz Giacomelli,María Eugenia González Toledo,Fátima Pagani Cassará,Agustina Tamargo,Matías Delfitt 대한뇌졸중학회 2014 Journal of stroke Vol.16 No.3

Background and Purpose Ascertaining stroke severity and predicting risk of in-hospital mortality is crucial to advise patients and families about medical decisions. We developed and tested the validity of a new stroke score, the 6S Score (Stroke Severity Score based on Six Signs and Symptoms), for quantifying ischemic stroke severity and predicting in-hospital mortality. Methods We prospectively assessed 210 consecutive acute ischemic stroke patients. The cohort was further divided into a derivation (n=120) and a validation (n=90) sample. From a total of 10 stroke signs and symptoms, we selected those with likelihood ratio’s P<0.005. We tested the validity of the score for predicting in-hospital mortality by using receiver operating characteristic curves. We used a scatterplot and the Spearman’s test to evaluate the correlation between the 6S Score and the National Institutes of Health Stroke Scale as a marker of stroke severity. We used principal component and exploratory factor analyses for assessing qualitative aspects of the 6S Score. Results The C statistic for in-hospital mortality was 0.82 for the 6S Score and 0.86 for the National Institutes of health Stroke Scale, respectively, with no significant differences between each other (P=0.79). The correlation between both scores was strong (Spearman’s rho 0.68, P<0.001). The factor analyses showed a good balance between left/right hemispheres and anterior/posterior circulations. Conclusions The 6S Score may constitute a tool for easily assessing stroke severity and predicting stroke mortality. Further research is needed for further assessing its external validity.

Test of Special Relativity Using a Fiber Network of Optical Clocks

Delva, P.,Lodewyck, J.,Bilicki, S.,Bookjans, E.,Vallet, G.,Le Targat, R.,Pottie, P.-E.,Guerlin, C.,Meynadier, F.,Le Poncin-Lafitte, C.,Lopez, O.,Amy-Klein, A.,Lee, W.-K.,Quintin, N.,Lisdat, C.,Al-Maso American Physical Society 2017 Physical Review Letters Vol.118 No.22

<P>Phase compensated optical fiber links enable high accuracy atomic clocks separated by thousands of kilometers to be compared with unprecedented statistical resolution. By searching for a daily variation of the frequency difference between four strontium optical lattice clocks in different locations throughout Europe connected by such links, we improve upon previous tests of time dilation predicted by special relativity. We obtain a constraint on the Robertson-Mansouri-Sexl parameter |alpha| <= 1.1 x 10(-8), quantifying a violation of time dilation, thus improving by a factor of around 2 the best known constraint obtained with Ives-Stilwell type experiments, and by 2 orders of magnitude the best constraint obtained by comparing atomic clocks. This work is the first of a new generation of tests of fundamental physics using optical clocks and fiber links. As clocks improve, and as fiber links are routinely operated, we expect that the tests initiated in this Letter will improve by orders of magnitude in the near future.</P>

Gas Exchanges and Dehydration in Different Intensities of Conditioning in Tifton 85 Bermudagrass: Nutritional Value during Hay Storage

M. Pasqualotto,M.A. Neres,V.F. Guimaraes,J. Klein,A.M. Inagaki,C. Ducati 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.6

The present study aimed at evaluating the intensity of Tifton 85 conditioning using a mower conditioner with free-swinging flail fingers and storage times on dehydration curve, fungi presence, nutritional value and in vitro digestibility of Tifton 85 bermudagrass hay dry matter (DM). The dehydration curve was determined in the whole plant for ten times until the baling. The zero time corresponded to the plant before cutting, which occurred at 11:00 and the other collections were carried out at 8:00, 10:00, 14:00, and 16:00. The experimental design was randomised blocks with two intensities of conditioning (high and low) and ten sampling times, with five replications. The high and low intensities related to adjusting the deflector plate of the free iron fingers (8 and 18 cm). In order to determine gas exchanges during Tifton 85 bermudagrass dehydration, there were evaluations of mature leaves, which were placed in the upper middle third of each branch before the cutting, at every hour for 4 hours. A portable gas analyser was used by an infrared IRGA (6400xt). The analysed variables were photosynthesis (A), stomatal conductance (gs), internal CO2 concentration (Ci), transpiration (T), water use efficiency (WUE), and intrinsic water use efficiency (WUEi). In the second part of this study, the nutritional value of Tifton 85 hay was evaluated, so randomised blocks were designed in a split plot through time, with two treatments placed in the following plots: high and low intensity of cutting and five different time points as subplots: cutting (additional treatment), baling and after 30, 60, and 90 days of storage. Subsequently, fungi that were in green plants as well as hay were determined and samples were collected from the grass at the cutting period, during baling, and after 30, 60, and 90 days of storage. It was observed that Tifton 85 bermudagrass dehydration occurred within 49 hours, so this was considered the best time for drying hay. Gas exchanges were more intense before cutting, although after cutting they decreased until ceasing within 4 hours. The lowest values of acid detergent insoluble nitrogen were obtained with low conditioning intensity after 30 days of storage, 64.8 g/kg DM. The in vitro dry matter of Tifton 85 bermudagrass did not differ among the storage times or the conditioning intensities. There was no fungi present in the samples collected during the storage period up to 90 days after dehydration, with less than 30 colony forming units found on plate counting. The use of mower conditioners in different intensities of injury did not speed up the dehydration time of Tifton 85.

Computer Assisted EPID Analysis of Breast Intrafractional and Interfractional Positioning Error

Sohn Jason W.,Mansur David B.,Monroe James I.,Drzymala Robert E.,Jin Ho-Sang,Suh Tae-Suk,Dempsey James F.,Klein Eric E. Korean Society of Medical Physics 2006 의학물리 Vol.17 No.1

유방암 환자의 방사선치료에 있어 치료도중(intrafractional) 및 분할 치료 간(intefractional)에 발생되는 오차를 측정하는 자동분석소프트웨어를 개발하였다. 오차 분석 결과는 3차원 입체조형 방사선치료를 임상에 적용하기에 앞서 적절한 치료계획용적(Planning Target Volume, PTV)을 설정하는 데 있어 매우 중요하다. 본 연구에서는 전자포탈영상장치(Electrical Portal imaging Device, EPID)로써 Portal Vision LC250 액체 충전형 이온화 검출기를 사용하였다(fast frame-averaging 모드, 초당 1.4 프레임, 256X256 픽셀). 12명의 환자에 대해 최소 7일 이상씩 영상을 획득하였다. 매 치료마다 평균 8 내지 9개의 영상을 각 빔에 대해 얻었다(분당 400 MU 선량률). 총 2,931 (720 측정을 포함하는)개의 영상을 정량적으로 분석할 수 있는 자동화 영상 분석 소프트웨어를 개발하였다. 이를 통해 호흡으로 인해 발생하는 치료도중 오차와 분할 치료간 발생하는 분할치료오차의 표준편차($\sigma$)들을 계산하였다. 신뢰 구간 95%로 임상표적체적(Clinical Target Volume, CTV)을 포함할 수 있는 PTV 마진은 $2\;(1.96\;{\sigma})$으로 계산되었다. 주로 호흡으로 인해 유발되는 치료도중오차를 보상하기 위해 필요한 PTV 마진은 2 mm에서 4 mm이었다. 반면에 분할 치료간 오차를 보상하기위해 필요한 PTV 마진은 7 mm에서 31 mm이었다. 12명의 환자에 대한 전체 평균오차는 17 mm이었다. 분할치료 간 오차는 호흡에 의해 유발되는 치료도중 오차에 비해 2배에서 15배까지 더 크게 나타났다. 유방암 치료에 있어 3차원 입체정형조사나 세기조절방사선치료(Intensity Modulated Radiation Therapy, IMRT)를 적용하기에 앞서 반드시 셋업 오차의 크기를 측정하여 PTV에 적절히 반영되어야 한다. 유방에 대한 3차원 입체정형조사나 세기조절방사선치료를 위해 반드시 필요한 것은 아니지만, 큰 PTV 마진을 줄여주기 위해서는 영상유도방사선치료(Image Guided Radiation Therapy, IGRT)가 매우 유용하게 이용될 수 있다. 전자포탈영상장치 들은 본 보고서에서 기술한 바와 같은 자동분석소프트웨어를 반드시 포함하여야 한다. 이를 통해 수많은 EPID 영상들을 자동화 처리하고 오차분석을 시행함으로써 각 병원의 임상적용 방법 및 환경에 따라 상이하게 나타날 수 있는 오차의 크기를 감안한 적절한 PTV마진을 구하는데 도움을 얻을 수 있다. 이러한 장치들은 또한 최소의 노력으로 환자 치료를 관찰할 수 있는 귀중한 정보를 제공해 준다. Automated analysis software was developed to measure the magnitude of the intrafractional and interfractional errors during breast radiation treatments. Error analysis results are important for determining suitable planning target volumes (PTV) prior to Implementing breast-conserving 3-D conformal radiation treatment (CRT). The electrical portal imaging device (EPID) used for this study was a Portal Vision LC250 liquid-filled ionization detector (fast frame-averaging mode, 1.4 frames per second, 256X256 pixels). Twelve patients were imaged for a minimum of 7 treatment days. During each treatment day, an average of 8 to 9 images per field were acquired (dose rate of 400 MU/minute). We developed automated image analysis software to quantitatively analyze 2,931 images (encompassing 720 measurements). Standard deviations ($\sigma$) of intrafractional (breathing motion) and intefractional (setup uncertainty) errors were calculated. The PTV margin to include the clinical target volume (CTV) with 95% confidence level was calculated as $2\;(1.96\;{\sigma})$. To compensate for intra-fractional error (mainly due to breathing motion) the required PTV margin ranged from 2 mm to 4 mm. However, PTV margins compensating for intefractional error ranged from 7 mm to 31 mm. The total average error observed for 12 patients was 17 mm. The intefractional setup error ranged from 2 to 15 times larger than intrafractional errors associated with breathing motion. Prior to 3-D conformal radiation treatment or IMRT breast treatment, the magnitude of setup errors must be measured and properly incorporated into the PTV. To reduce large PTVs for breast IMRT or 3-D CRT, an image-guided system would be extremely valuable, if not required. EPID systems should incorporate automated analysis software as described in this report to process and take advantage of the large numbers of EPID images available for error analysis which will help Individual clinics arrive at an appropriate PTV for their practice. Such systems can also provide valuable patient monitoring information with minimal effort.

AZ91HP 마그네슘합금의 기계적성질에 미치는 다이캐스팅 조건의 영향

안용식(Yong Sik Ahn),(F. Klein) 한국주조공학회 2002 한국주조공학회지 Vol.22 No.4

N/A Magnesium alloys have high strength to weight ratio and are extremely attractive for applications in transport industry. Most of structural magnesium alloys are manufactured by die casting process. The tensile properties of AZ91HP magnesium alloy were investigated after die casting under various die casting conditions. After die casting by using cold chamber machine, the volume porosity of specimens was examined with density method. With the increase of the volume porosity of specimens, both the tensile strength and elongation were significantly decreased, however the 0.2% offset strength was almost independent of the amount of porosity. With the increase of crystal pressure from 500 to 900 bar during die casting, the volume porosity was decreased, which resulted in the increase of the tensile strength. The mould temperature within the range of 150∼250℃ has not influenced the microstructure with the eutectic phase and tensile properties of specimens. The tensile strength was the highest at 90m/sec of gate speed.

Light Quality on the In Vitro Growth and Production of Pigments in the Genus Alternanthera

Andressa Reis,Alitcia Moraes Kleinowski,Fátima Rosane Schuquel Klein,Renata Trevizan Telles,Luciano do Amarante,Eugenia Jacira Bolacel Braga 한국작물학회 2015 Journal of crop science and biotechnology Vol.18 No.5

In tissue culture, several chemical and physiological factors can influence the production of secondary metabolites. The growth response and increased secondary metabolite production generated by a high irradiance environment, can be used to determine a favorable habitat for the growth and conservation of medicinal plants. Thus, the present study aimed to evaluate the influence of light quality on growth and production of secondary metabolites in Alternanthera sessilis (L.) R. Br. ex DC. (sessile joyweed), Alternanthera philoxeroides (Mart.) Grisebach (alligatorweed), Alternanthera tenella Colla (joyweed), and Alternanthera brasiliana (L.) Kuntze (Brazilian joyweed) plants cultured in vitro. The species were grown in MS medium, for 45 days in different light qualities (blue, white, and red). Growth parameters and biochemical analysis were performed at the end of the study. The results show that the red light allowed a higher accumulation of biomass in most species; red and white light were great inductors for the production of betacyanin and the blue light favored the enhancement of flavonoids. In this manner, the quality of light can affect the betacyanin, betaxanthin, and flavonoid biosynthesis as well as growth patterns in the related Alternanthera species. Based on the data presented, we suggest that specific genes can encode the pigment production according to the light quality which exhibit distinct activation patterns in different plant species.

Visualizing the lymphatic vessels and flow with high-resolution ultrasonography and microvascular flow imaging

Joep J. J. Vullings,Caroline van Schaik,Jurgen J.Fütterer,Chris L.de Korte,Willemijn M.Klein 대한초음파의학회 2023 ULTRASONOGRAPHY Vol.42 No.3

Imaging of the lymphatic system has always encountered difficulties, such as high costs, timeconsuming procedures, and low-resolution images. Each method of imaging provides its own challenges. The use of high-resolution ultrasonography (HR-US) and microvascular flow imaging (MVFI) may prove to be the most effective method for visualizing the superficial lymphatic vessels. This study investigated the utilization of HR-US and MVFI in imaging inguinal lymph nodes and vessels, as well as the innovative use of an intranodal saline injection that acted as a contrast agent. This technical note aims to demonstrate that HR-US and MVFI, in combination with an intranodal saline injection, are applicable to the dynamic imaging of superficial inguinal lymph nodes and vessels.