http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Experiment Study on Efficient Flank Milling of Ti6AL4V Thin-walled Components
Yanyan Guo,Huayan Zhong,Wantao He,Guangfu Tao 보안공학연구지원센터 2016 International Journal of Multimedia and Ubiquitous Vol.11 No.7
Flank milling is a method of line contact machining and also is an important method in machining aerospace structures components, turbine blades and so on. In this paper, flank milling of Ti6AL4V is conducted with carbide tools on CNC machining center. First, acquired cutting force signals are analyzed in time domain and frequency domain based on Matlab software to obtain the distribution of cutting force energy. Second, the flank milling force experimental formulas are established by means of regression analysis. Finally, the influence of cutting parameters such as feed per tooth, the axial depth of cut, cutting width and cutting speed on cutting force is studied. The curves between cutting parameters and cutting force are obtained by analyzing the flank milling experiment. This research has certain guiding significance in selecting cutting parameters for flank machining Ti6AL4V.
Double-voltage vector-based model predictive control for three-phase grid-connected AC/DC converters
Guo, Leilei,Zhang, Kaixuan,Li, Yanyan,Jin, Nan The Korean Institute of Power Electronics 2020 JOURNAL OF POWER ELECTRONICS Vol.20 No.1
This paper presents a double-vector-based model predictive control method for three-phase grid-connected AC/DC converters. The conventional model predictive control (MPC) presents high steady-state ripples due to the application of only one voltage vector during one control period. To reduce the current ripples, a new MPC method is proposed. Double-voltage vectors are selected and applied it each control period in the proposed method. To reduce the calculation burden, the duration time of each voltage vector is calculated based on the principle of modulated MPC. Furthermore, the effectiveness of the proposed double-voltage vector-based MPC strategy is analyzed in theory for the first time. Then, it is further verified by comparative experiment studies.
Finite-time Consensus of Networked Euler-Lagrange Systems via STA-based Output Feedback
Yanyan Fan,Zhenlin Jin,Baosu Guo,Xiaoyuan Luo,Xinping Guan 제어·로봇·시스템학회 2022 International Journal of Control, Automation, and Vol.20 No.9
The consensus problem based on full state feedback has been extensively studied, but rarely for leaderless distributed finite-time consensus of networked Euler-Lagrange systems based on output-feedback. In this work, the finite-time consensus problem of networked Euler-Lagrange systems subject to unknown velocity is studied. A finite-time consensus protocol is first proposed based on the relative positions and velocities. Then, the more challenging situation of networked Euler-Lagrange systems subject to unmeasurable velocity is considered. A model-independent observer based on the super-twisting algorithm (STA) is developed for velocity error estimation, based upon which a finite-time output feedback control protocol is developed for consensus of the networked EulerLagrange systems. Stability analysis shows that the networked Euler-Lagrange systems can achieve consensus in finite time. Finally, numerical simulations are conducted to demonstrate the effectiveness of the proposed control algorithms.
Ma Yanyan,Zhang Weida,CHENGSHAOBO,Yang Wanting,Liu Yuxing,Yang Shengyu,Zhang Xinling,Guo Minrui,Chen Guogang 한국원예학회 2022 Horticulture, Environment, and Biotechnology Vol.63 No.6
Prunus domestica L. cv. Ximei fruit perishes quickly due to intense metabolic activity after being harvested. To prolong shelf life and maintain fruit quality, the eff ects of 1-methylcyclopropene (1-MCP) treatment on P. domestica fruit during storage at 4 ± 1 °C were investigated. The results showed that the soluble solid content (SSC), respiratory rate (29.8%), ethylene production (27.2%), anthocyanin content, malonaldehyde content (MDA), hydrogen peroxide content (H 2O2), and superoxide anion activity (O 2·−) of P. domestica fruit were all signifi cantly reduced by 1-MCP treatment (1.0 μL L −1), while the content of ascorbic acid and total phenol, and the activity of SUPEROXIDE DISMUTASE (SOD, 61.3%), CATALASE (CAT, 39.0%), ASCORBATE PEROXIDASE (APX, 23.7%), and PEROXIDASE (POD, 38.0%) increased compared to untreated fruit after 35 days of cold storage. Overall, 1-MCP treatment could maintain high postharvest quality and anti- oxidant activity in P. domestica fruit
Improved Meet-in-the-Middle Attacks on Crypton and mCrypton
( Jingyi Cui ),( Jiansheng Guo ),( Yanyan Huang ),( Yipeng Liu ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.5
Crypton is a SP-network block cipher that attracts much attention because of its excellent performance on hardware. Based on Crypton, mCrypton is designed as a lightweight block cipher suitable for Internet of Things (IoT) and Radio Frequency Identification (RFID). The security of Crypton and mCrypton under meet-in-the-middle attack is analyzed in this paper. By analyzing the differential properties of cell permutation, several differential characteristics are introduced to construct generalized δ-sets. With the usage of a generalized δ-set and differential enumeration technique, a 6-round meet-in-the-middle distinguisher is proposed to give the first meet-in-the-middle attack on 9-round Crypton-192 and some improvements on the cryptanalysis of 10-round Crypton-256 are given. Combined with the properties of nibble permutation and substitution, an improved meet-in-the-middle attack on 8-round mCrypton is proposed and the first complete attack on 9-round mCrypton-96 is proposed.
Cooperative and Competitive Effect in Heterogeneous Networks of Healthcare System
( Xiaoshuang Liu ),( Guixia Kang ),( Ningbo Zhang ),( Yanyan Guo ) 한국인터넷정보학회 2015 KSII Transactions on Internet and Information Syst Vol.9 No.11
Different network provides different service. To maximize the profit, heterogeneous networks form a whole, which may either compete or cooperate with each other. In this paper, the healthcare monitor network architecture is introduced to build the competitive and cooperative mechanisms of heterogeneous networks which contain three networks, namely, cellular network, WLAN and WMAN. This paper considers the natural growth rate of the network with competitive and cooperative effects. Then, the stability of the proposed model and its equilibrium points are analyzed by the ordinary differential principle. Finally, simulation results show that the natural growth rate cannot increase the profit of the network, but effective cooperative among heterogeneous networks can increase the profit of each network, and competitive may decrease the profit of each network.
Experimental Study of Factors Affecting the 7075 Aluminum Alloy Thin-walled Parts Milling Force
Fengyun Yu,Lin Wu,Yunliang Fu,Yanyan Guo,Can Zhao,Xufeng Wang 보안공학연구지원센터 2016 International Journal of Smart Home Vol.10 No.8
Taking 7075 aluminum alloy thin-walled part as the research object, with higher cutting parameters than the normal value selected, a four factors and four levels orthogonal experiment was carried out, in which we chose YG carbide cutting tools for the milling, intercepted the milling force stable section, selected ten peak values and took an average, conducted multiple linear regression analysis using Matlab numerical calculation software and established the milling force empirical formula of 7075 aluminum alloy thin-walled part to study the factors which have influence on its milling force. By range analysis of the experimental results, the cutting force change rule in the manufacturing process of aluminum alloy with the change of cutting parameter was revealed. It is found that the axial cutting depth had the greatest influence on the force perpendicular to the direction of cutting surface, and the radial cutting depth had the minimal impact. By comparative analysis on theoretical value and experimental value of milling forces, we found that the predicted value of the milling force Fx and Fy in theory were in good agreement with the experimental results with a relative error less than 8.7%. Under the experimental conditions, the optimal milling parameters are axial cutting depth of 2mm, radial cutting depth of 0.5mm, feed speed 95mm/min and cutting speed of 23.86m/min. It will provide data and experiment support for milling of thin-walled parts of similar materials, which will have important practical value and theoretical significance for engineering.
Zhao Can,Tao GuangFu,Liu Yubo,Guo Yanyan 보안공학연구지원센터 2015 International Journal of Hybrid Information Techno Vol.8 No.8
To analyze the influence caused by different cutting parameters on the cutting force and get the coefficient of milling force obtained under the state of high-speed milling, the high-speed milling test was conducted through carbide cutting tools milling the titanium impeller under the state of high speed. Firstly, the influence on the three target force, caused by every parameter, was analyzed through orthogonal experiment. And then, the milling force coefficient got from two different formula was compared in this article. Calculated and experimental results show that the milling force coefficient got by means of the empirical formula reduced flutter stability limit, however, he milling force coefficient got by means of parsing not. At last, it also provide data to support to avoid the chatter occurred between tool and workpiece and select the processing parameters optimally.
The Study of Tool Wear About Ceramic Cutting Tool Processing Mechanism of Super-alloy
Zhao Can,Tao GuangFu,Liu Yubo,Guo Yanyan,Zhang Yanhui 보안공학연구지원센터 2015 International Journal of u- and e- Service, Scienc Vol.8 No.5
Separately using two different types of ceramic cutting tool, through the experiments of ceramic cutting tool to study the processing of super-alloy of tool wear, compare the two processing the cutting tool wear condition, and further analysis of the wear mechanism of ceramic cutting tool process, and get the related conclusion.
Ping Kou,Yu-Fei Kang,Li-Tao Wang,Li-Jun Niu,Ying Xiao,Na Guo,Qi Cui,Yanyan Liu,Yu-Jie Fu 한국공업화학회 2019 Journal of Industrial and Engineering Chemistry Vol.80 No.-
This study explored an integrated strategy for extraction and preparative separation of four anthocyaninsfrom Ribes nigrum L. using DES-based microwave assisted extraction andflash chromatography. Theextraction yield of anthocyanins reached 2.03 mg/g after optimization. An efficient preparativeseparation process of four main anthocyanins by macroporous resin andflash chromatography wasestablished afterwards. The yields of D3G, D3R, C3G and C3R reached 0.32 mg/g, 0.47 mg/g, 0.18 mg/g and0.43 mg/g with the purities of more than 95%, respectively. The developed procedure represents anefficient and convenient alternative for the systematic utilization of natural products from plantmaterials.