http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
騷音暴露가 産卵鷄의 生産性과 血鋌코티솔 水準에 미치는 影響
조문제,김진영,황성구,고태송,이원창 건국대학교 동물자원연구센터 1998 動物資源硏究誌 Vol.19 No.-
소음환경 폭로가 산란계(産卵鷄)의 생산성과 혈액중 코티솔(cortisol) 레벨에 미치는 영향을 조사하기 위하여, 50주령(週齡)의 산란계(Rhode Island Red率 Isabrown種)에 도로변소통 차량소음을 녹음 증폭한 85∼95dB(A)의 소음환경에 노출하여 측정된 산란율, 난중, 산란일량, 사료섭취량 및 사료효율과 혈장 코티솔수준을 대조 와 비교하였다 소음노출이 산란율과 산란일량에 미치는 영향은 통계적으로 유의한 차이는 없었으나, 난중은 낮아지는 경향이 관찰되었다(p<0.08). 소음노출이 사료섭취량은 높이고 사료효율을 감소시티는 경향이 있었다. 소음폭로 시험대상 산란계의 실험전후에 혈쟁중 코티솔 레벨을 비교 관찰한바, 소음환경에 6시간 폭로된 후 1시간 후에 측정된 혈청중의 코티솔 레벨은 실험전에 비하여 약52.4%가 증가되었다. (p<0.05). 다시 1주일 후 동일사간에 채혈된 혈청중의 코티솔 레벨도 전과 비슷한 53.8%의 증가하였으나, 2주일 후에서부터는 감소 추세를 보여서 통계학적으로 유의한 차이를 보이지 않고 있었다. 본 성적은 일정강도 이상의 음향강도는 채란계에 최초에는 스트레스원으로 작용하나 노출시간이 장기화함에 따라 적응하고 있다는 것이 시사되었다. Noise produced by various environmental hazard leads to a patho-physiological lesions often resulting in metabolic disorder and psychiatric confusion in man and domestic animals. To study effects of noise stress in layer, forty two layer of 50 wks-old(Rhode Island Red) exposed to the sound of 85∼95 dB<A> were determined egg production performance and cortisol level in plasma. Noise exposure did not significantly affect egg production and daily egg mass but tended to decrease (p<0.08) egg weight. Noise exposure for 6 hours increased 52.4% and 53% (p<0.05) of plasma cortisol level at day 1 and day 7, respectively, compared to those in layer before noise exposure. Thereafter, layer, however, maintained the higher cortisol levels in plasma. This result indicated that above some dB levels of sounds functions as stressor but accustomed during longer period of noise exposure and requires further investigation of noise exposure for poultry production.
Effect of Matrix Viscosity on Clay Dispersion in Preparation of Polymer/Organoclay Nanocomposites
Ko, Moon-Bae,Jho, Jae-Young,Jo, Won-Ho,Lee, Moo-Sung The Korean Fiber Society 2002 Fibers and polymers Vol.3 No.3
The viscosity effect of matrix polymer on melt exfoliation behavior of an organoclay in poly($\varepsilon$-caprolactone) (PCL) was investigated. The viscosity of matrix polymer was controlled by changing the molecular weight of poly($\varepsilon$-eaprolactone), the processing temperature, and the rotor speed of a mini-molder. Applied shear stress facilitates the diffusion of polymer chains into the gallery of silicate layers by breaking silicate agglomerates down into smaller primary particles. When the viscosity of PCL is lower, silicate agglomerates are not perfectly broken into smaller primary particles. At higher viscosity, all of silicate agglomerates are broken down into primary particles, and finally into smaller nano-scale building blocks. It was also found that the degree of exfoliation of silicate layers is dependent upon not only the viscosity of matrix but thermodynamic variables.
조문재,황철호,서상준,차일환,Jho, Moon-Jae,Hwang, Cheol-Ho,Suh, Sang-Joon,Cha, Il-Whan 한국음향학회 1990 韓國音響學會誌 Vol.9 No.2
초음파를 완전 반사시킬 수 있는 반사용 target과 완전 흡수시킬 수 있는 흡음용 target을 이용하여, 이들 target에 가해진 방사음압을 전자저울로 측정하고 이로부터 밀리와트 영역의 초음파 파워를 결정할 수 있는 시스템을 구성하였다. 이 시스템 구성의 타당성 검토를 위해 완전 반사용 target과 완전 흡수용 target으로 구한 초음파 파워의 크기를 측정하였으며, 측정 시스템의 계통 오차 및 재현성 등에 대해 고찰하였다. 두가지 target을 각기 사용하여 측정한 초음파 파워의 차이는 2%의 상대 오차 이내에서 잘 일치하며, 시스템의 재현성은 10mW 이상의 초음파 파워에 대한 표준편차가 2%이하였다. An ultrasonic power measurement system in milliwatt range was constructed. The ultrasonic power can be determined by measuring the radiation pressure on a target using self-compensating microbalance. Measurement was performed using a perfect reflector and a perfect absorber. In order to check the feasibility of the system, the ultrasonic power for the two targets was measured. Also, the systematic measurement errors and the reproducibility were examined. The relative error between two targets is proved to be within 2%. Also when the ultrasonic power range is larger than 10mW, the standard deviation for repeated measurement becomes smaller than ${\pm}$2%.
조문재,김용태,윤용현,정성수,Jho Moon Jae,Kim Yong Tae,Yun Yong Hyeon,Jung Suug Soo 한국음향학회 2005 韓國音響學會誌 Vol.24 No.8
초음파 파워의 정확한 측정은 초음파 의료 장비의 품질 보증과 안전성에 중요하다. 본 논문에서는 초음파 조사가 on/off를 반복하는 동안의 표적에 작용하는 방사 힘과 부력과 같은 다른 원인에서 기인하는 저울 지시 값의 시간에 따른 변화로부터 초음파 파워를 결정하는 간단한 이론을 제시하였다. 아울러 개발된 초음파 파워 측정 시스템에 대해 정밀 기계적 정렬장치, 전기신호 발생부 구성, 제어 및 측정부 구성 및 적절한 절차와 함께 상세히 기술하였다. 본 시스템으로 1 MHz, 5 MHz, 10 MHz, 15 MHz에서 10 mW에서 10 W범위에 걸쳐 측정된 결과를 다른 나라에서 교정된 기준 데이터와 상호 비교한 결과 상대 편차가 $5\%$ 이내로 확인되었다. The precise measurement of ultrasonic power is important to the qualify assurance and the safety of medical ultrasonic equipments In the Present work, a brier theory was introduced to determine the ultrasonic Power from the time valving balance-indication due to the radiation force acting on an absorbing target and/or other causes such as buoyancy during the repetition of on/off behavior of ultrasonic irradiation. The developed automated system measuring the ultrasonic power was described in detail with the precise mechanical alignment tool , the electric signal generation network, the control and measurement network and the appropriate procedure. The ultrasonic power measured by the developed system was compared to the reference data calibrated by the other national metrology institute at 1 MHz, 5 MHz, 10 MHz, and 15 MHz over the range 10 mW to 10 W. Their relative differences are within $5\%$.
Yong Hyeon Yun,Moon Jae Jho,Yong Tae Kim,Myoungho Lee IEEE 2012 IEEE SENSORS JOURNAL Vol.12 No.5
<P>In this paper, we describe a test method for an ultrasonic array probe using electroacoustic radiation conductance. The radiation conductance was calculated using the measured acoustic power based on the radiation force balance method and the voltage for the driving element on the probe. To illustrate the usefulness of this method, we conducted the testing with a normal as well as a faulty probe with an open element or a block gain. In the comparison of the test results from each sample, the different values of radiation conductance signified the nonuniform probe gain. Specifically, the value of the radiation conductance of nearly zero revealed a clearly faulty element. To predict the temporal averaged acoustic power from sonography, we calculated the estimated value of the temporal acoustic power of a scan beam and sonography using radiation conductance. The result showed that the uniformity of the radiation conductance of each element is a useful parameter when testing an array probe. It enables an estimation of the acoustic output without additional measurements regardless of whether or not the scanning procedure changes when creating the image.</P>