의무고용제도 재설계 방안

김종진,장창엽,유완식,김언아,이정주,류정진,강필수,최종철,남용현,김윤삼 한국장애인고용촉진공단 고용개발원 2008 연구개발 Vol.- No.2

현행 우리나라 의무고용제도는 장애인구의 급격한 증가, 장애인차별금지 및 권리구제 등에 관한 법률의 도입 등 외부환경변화에 신축적으로 대처하지 못하고, 경증장애인 중심으로 의무고용제도가 운영됨으로써 중증장애인의 고용배제가 우려되고 있다. 본 보고서는 이러한 문제점을 해결하기 위해 의무고용제도의 일자리 확대와 고용증가를 통해 중증장애인의 고용기회를 확대할 수 있는 정책방안을 제시하기 위한 것이다. 본 보고서는 (1)의무고용 사업체의 의무고용 산정인원에서 자립장애인 제외 (2)현행 2% 의무고용률을 3%로 상향 조정 (3)사업체가 고용하는 중증장애인에 대한 더블카운트(2배) 가산제도 도입 (4)의무고용률 미달 사업주에 대한 부담금 차등징수의 4가지 정책방안, 제도 합리화 차원에서 장려금 지급방식의 개선과 사업주의 장애인에 대한 인식개선 방안을 제시하였다. 정책방안에 대한 영향분석 결과 의무고용 적용대상자에서 비장애인과 고용상 차별되지 않는 자립장애인(6등급)을 의무고용 산정인원에서 제외하는 경우 의무고용 사업체의 고용인원은 23,296명이 감소해 고용률은 1.35%에서 0.88%로 감소하였고, 의무고용 사업체의 장애인 일자리 수는 미고용인원의 증가로 15,152개가 증가하였다. 그리고 기금은 부담금이 631억원 증가하고, 장려금이 352억원 감소해 983억원의 수지개선 효과가 발생하는 것으로 나타났다. 의무고용 사업주의 의무고용률 3% 인상 방안은 의무고용률 상향 조정에 따른 미고용인원의 증가로 장애인의 일자리 수는 43,101개가 증가하고, 기금은 부담금이 1,709억원 증가하는 반면, 장려금은 293억원이 감소해 2,002억원의 수지개선 효과가 발생하는 것으로 나타났다. 의무고용 사업주가 고용하는 중증장애인을 2인으로 더블카운트 하는 중증장애인 가산제도의 도입은 의무고용 사업체의 장애인근로자가 67,261명에서 79,685명(1,2등급만 포함시 75,685명)으로 증가하여 고용률은 1.35%에서 1.60%(1.2등급만 포함시 1.52%)로 증가하고, 의무고용률 미달 사업체의 미고용 인원이 감소하여 2,745개의 일자리가 감소하였다. 그리고 기금은 부담금이 118억원 감소하는 반면, 장려금은 418억원이 증가해 536억원의 수지악화가 발생하는 것으로 나타났다. 의무고용률 미달 사업체의 고용유인을 위해 고용률 1.0%미만, 1.0-1.5%, 1.6-2.0% 미만에 대해 각각 20%, 10%, 5%의 할증률을 순차적으로 가중하여 부과하는 부담금 차등징수 방안(3차년까지의 효과임)은 1.0% 미만 사업주는 86만원, 1.0-1.5% 사업주는 64만원, 1.6-2.0% 미만 사업주는 58만원의 부담기초액을 부과할 때 고용률은 1.35%에서 1.53%로 증가(1.6-2.0% 미만 사업주는 의무고용률 2%를 달성)하고, 미고용인원의 감소로 장애인의 일자리는 8,836개가 감소하는 것으로 나타났다. 그리고 기금은 부담금이 58억원 감소하여 수지는 악화되었다. 이상의 네 가지 방안은 모두 장애인의 고용증대를 가져온다는 측면에서는 유효하지만, 장애인의 일자리 확대를 통한 중증장애인의 고용을 증대한다는 정책목표를 달성하는 데에는 한계점을 안고 있기 때문에 어느 한 정책만을 선택하기보다는 정책효과를 극대화하기 위해 정책결합(policy mix)을 이용하는 것이 바람직함을 제시해주었다. 즉, 의무고용 적용대상자 조정방안/의무고용률 상향조정 방안과 중증장애인 가산제도/부담금 차등징수 방안을 조합 또는 모두 동시에 선택하는 경우 의무고용 사업체의 장애인 일자리 수의 확대와 중증장애인 고용을 동시에 달성하고, 기금의 수지균형도 달성 가능한 것으로 나타났다. The mandatory employment quota system of Korea does not reflect the changing external factors such as the growing population of people with disabilities(PWDs) and the enactment of the Anti-discrimination Law for People with Disabilities. The current employment quota system focuses on people with mild disabilities thus excluding people with severe disabilities from employment. The purpose of this report is to propose a plan in order to increase employment opportunity for the severely disabled through the reform of the employment quota system. This report analyzes the following : (1) exclude grade 6 disability from mandatory employment quota (2) raise the employment quota from 2% to 3% (3) implement the double counting for employers that employ the severely disabled (4) differentiate the amount of levy collected from corporations that are unable to meet the quota. The aforementioned plans are useful in that they increase employment for people with disabilities. However, there are limitation to reaching the policy objectives by increasing jobs for people with severe disabilities. Therefore, to maximize the effects we should consider policy mix of these four policies. In other words, by mixing the policies of adjusting the employment quota target/raising the quota ratio and implementing the double count/differentiating the amount of levy, we can achieve the goal of increasing jobs for the severely disabled and maintain equilibrium between incomings and outcomings.

자동차용 ABS MKⅣ-G의 성능 평가에 관한 연구

장성규,전언찬,김대원 동아대학교 공과대학부설 생산기술연구소 1997 生産技術硏究所硏究論文集 Vol.2 No.2

High performance ABS have been introduced in the market because car manufacturers and drives have been recongnized the important safety function of these systems. In the beginning of ABS introduction only luxury vehicles where equipped with ABS because of the high additional cost. Today there is the medium and even compact vehicle class. Therefore it became a necessity to develop an ABS which meets the requirements of manufacturers and drivers concerning performance comfort and especially cost. As a highly advanced technology and skills which include electronic, hydraulic controls, element design and manufacturing technology. ABS system has recently been entered into mass production as a result of long research and many try and errors. In this research, we tested MKⅣ-G ABS system, which was developed by ITT automotive, in various methods and got the quite good results in its function. MKⅣ-G ABS system can be extended to TCS(Traction Control System) function and is now under developing by localization in domestic. But on demand car manufactures and customers, new generation ABS system, that means simple, low cost and high function, is already under developing among advanced nations in this area. Although we are still in early stage of ABS system development, if we analyze and study the function of various ABS system through these research and put it to practical use step by step, we can develop independent ABS model in the near future.

분말야금법으로 제조된 2124AI 합금의 빠른변형률속도 초소성 거동

金祐塡,張勝彦,南勝義,金亨駿 弘益大學校 科學基術硏究所 1999 科學技術硏究論文集 Vol.10 No.2

Ceramic whisker or particulate reinforced aluminum based metal matrix composites show high room temperature strength, but their low formability makes it difficult to form into desired shapes. By superplastic deformation, their formability can be improved and it is possible to produce complex parts for automotive aerospace simultaneously instead of many near-net-shape forming operations. This study has been carried out to investigate the high temperature mechanical and superplastic properties in 2124Al alloy. SRC(Strain Rate Change) tests show that the value of n(stress exponent) is around 3 at high strain rate and above 5 at low strain rate. It was turned out that 212Al matrix alloy exhibited reasonably high tensile elongation above 250% with the broad range of temperature and strain rate. Especially, at 550℃, both materials showed very high elongation failure up to 700% for 2124Al alloy. The strength comparison is lower strength then 2124Al composites were obtained that the composite is lower strength than 2124Al alloy at superplastic region.

초경 드릴의 절삭 성능에 관한 실험적 평가 연구

장성규,변상기,이승수,김현수,전언찬 동아대학교 공과대학부설 생산기술연구소 1997 生産技術硏究所硏究論文集 Vol.2 No.1

Among the cutting process, recently hole processing in one of extensive using. This study, we made use of the 3 point edge drill. Regarding the cutting efficiency, we investigated the shape of cutting hole and studied cutting hole, a slope of center shaft, roundness and surface roughness. By using carbide 3 point cutting edge, compare with 2 cutting edge, it is possible that high precision drill processing and near the hole, at extremely limited area, quantity of magnification is a little big. After 15m cutting distance, a gradient of center shaft values was fixed 22㎛. It is necessary that a sufficient consideration concerned with jig intensity of workpiece, cutting conditions etc.

건축물 건설단계에서의 에너지소비량 및 CO₂배출량 원단위 산출

김종엽,이승언,손장열 대한건축학회 2004 대한건축학회논문집 Vol.20 No.10

The purpose of this study is to establish the database that could be applied to the building LCA Firstly, in this paper, the methodologies of building LCA and energy based I/O model for estimating embodied energy of building materials were examined Then, the intensity of energy consumption and CO₂ emission for building materials and construction stage were estimated The intensity database for building materials calculated by the I/O table published in 2000 was compared with the database by the I/O table published in 1995 According to the result of comparison, there were a little differences between the results calculated by the new and the previous data, and two results showed nearly the same patterns So, it could be said that the industrial activity change has little effect on the energy intensity of building materials during the past 5 years For the calculation of the energy intensity in the construction stages, the payment documents of an ad and electricity consumptions during construction for the sample buildings were surveyed and the intensity per a building gross area were calculated The database presented in this paper could be applied to the building LCA process as the basic data for analysing global worming effect caused by building construction

Pt/X-zeolite 촉매에서 n-Hexane의 방향족화에 미치는 Ir과 Re의 영향

김장희,이태진,최종언 嶺南大學校 工業技術硏究所 1995 工業技術硏究所論文集 Vol.23 No.1

The influences of Ir and Re as the second metallic elements of Pt/modified X-zeolite catalysts were studied for n-hexane reforming at temperature 500℃. Zeolite-supported catalysts were prepared by various methods and were compared to commercial reforming catalysts with respect to activity, product selectivity and catalyst stability. The characterization of the catalysts was carried out using XRD and DSC. The Pt catalysts on zeolite supports exhibited higher reforming activity and stability than commercial reforming catalysts supported on the alumina. The catalytic activity of zeolite-supported catalysts followed the sequence: Pt/KX>Pt/NaX>Pt/Na-cluster ??. The bimetallic catalysts containing Ir or Re in addition to Pt exhibited better activity, stability and aromatics selectivity compared to monometallic catalysts. Finally, we concluded that the bifunctional catalysts containing the second metals (Ir, Re) and less acidic supports account for the higher activity, lower deactivation tendency, and same or higher selectivity of aromatization.

프리셉터 경험이 간호업무수행과 직무만족에 미치는 영향 연구

류언나,송혜숙,장은희,서효신,추연화,김인선,나명주,지성애,박경숙 중앙대학교 간호과학연구소 2001 중앙간호논문집 Vol.5 No.2

The purpose of this study was to investigate how preceptor experience has an effect upon preceptor nurses. This study was so designed that it could compare the difference between clinical performance and Job satisfaction of preceptor nurses and those of nonpreceptor nurses. Study subjects were sampled out from those nurses who worked with two university hospitals where preceptor programs were implemented. The number of subjects totaled to 134, including 69 preceptor nurses and 70 nonpreceptor nurses. The score of preceptor nurses' clinical performance and job satisfaction revealed a higher value than that of nonpreceptor nurses. A similar result was also shown in the subdomains. However these difference were not statistically significant. Among all of the preceptor nurses, the highest number of preceptor experience was just one time. Except for five times in preceptor experience, the more the number of times of preceptor experience, the higher score in clinical performance. It was manifested that the number of preceptor experience was not related to job satisfaction. The score of preceptor nurses' clinica1 performance and job satisfaction revealed a higher value than that of nonpreceptor nurses. A similar result was also shown in the subdomains. However these difference were not statistically significant. The reward that preceptor nurses wished most was a reduction of the work load assigned to them. Currently preceptor nurses are only receiving a small quantity of financial reward related with their preceptor role. Most of preceptor nurses (96.8%) were not satisfied with their existing reward. Almost half of the preceptor nurses(43.5%) did not want to play a role as preceptor again. The reason why the scores of clinical performance and job satisfaction were low might be attributed to the inadequate preceptor training program and reward system. Appropriate knowledge and clinical skill are expected to enhance the level of preceptor nurses' clinical performance and appropriate internal and external reward to elevate the level of preceptor nurses' Job satisfaction. Therefore, it is needed for us to develop more effective preceptor education program, financial reward, support of colleague nurses and nursing managers, and adjust workload for the purpose of more effective preceptor programs.

Prediction of drug-induced immune-mediated hepatotoxicity using hepatocyte-like cells derived from human embryonic stem cells

Kim, Dong Eon,Jang, Mi-Jin,Kim, Young Ran,Lee, Joo-Young,Cho, Eun Byul,Kim, Eunha,Kim, Yeji,Kim, Mi Young,Jeong, Won-il,Kim, Seyun,Han, Yong-Mahn,Lee, Seung-Hyo Elsevier 2017 Toxicology Vol.387 No.-

<P><B>Abstract</B></P> <P>Drug-induced liver injury (DILI) is a leading cause of liver disease and a key safety factor during drug development. In addition to the initiation events of drug-specific hepatotoxicity, dysregulated immune responses have been proposed as major pathological events of DILI. Thus, there is a need for a reliable cell culture model with which to assess drug-induced immune reactions to predict hepatotoxicity for drug development. To this end, stem cell-derived hepatocytes have shown great potentials. Here we report that hepatocyte-like cells derived from human embryonic stem cells (hES-HLCs) can be used to evaluate drug-induced hepatotoxic immunological events. Treatment with acetaminophen significantly elevated the levels of inflammatory cytokines by hES-HLCs. Moreover, three human immune cell lines, Jurkat, THP-1, and NK92MI, were activated when cultured in conditioned medium obtained from acetaminophen-treated hES-HLCs. To further validate, we tested thiazolidinedione (TZD) class, antidiabetic drugs, including troglitazone withdrawn from the market because of severe idiosyncratic drug hepatotoxicity. We found that TZD drug treatment to hES-HLCs resulted in the production of pro-inflammatory cytokines and eventually associated immune cell activation. In summary, our study demonstrates for the first time the potential of hES-HLCs as an <I>in vitro</I> model system for assessment of drug-induced as well as immune-mediated hepatotoxicity.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Generation and characterization of hES-HLCs for evaluation of drug-induced immune cell-mediated hepatotoxicity. </LI> <LI> The secretion of inflammatory cytokines is highly enhanced from APAP-treated hES-HLCs. </LI> <LI> Immune cells are activated and produce pro-inflammatory cytokines by conditioned medium from hES-HLCs cultured with APAP. </LI> <LI> Hepatotoxic results in hES-HLCs are consistent with those of primary human hepatocytes. </LI> <LI> Hepatotoxic drugs such as TZD, and non-hepatotoxic drugs such as aspirin and metformin, are also validated with our drug screening system. </LI> </UL> </P>

Grafting Fluorinated Polymer Nanolayer for Advancing the Electrical Stability of Organic Field-Effect Transistors

Kim, Kyunghun,An, Tae Kyu,Kim, Jiye,Jeong, Yong Jin,Jang, Jaeyoung,Kim, Haekyung,Baek, Jang Yeol,Kim, Yun-Hi,Kim, Se Hyun,Park, Chan Eon American Chemical Society 2014 Chemistry of materials Vol.26 No.22

<P>With the goal of achieving high-performance electrically stable organic field-effect transistors (OFETs), we chemically graft a fluorinated polymer nanolayer onto the polar oxide dielectric surfaces via a simple and easy fabrication process in ambient air. The para-fluorine-thiol click reaction between poly(pentafluorostyrene) (PFS) and mercaptopropyltrimethoxysilane is used to synthesize a graftable fluorinated polymer (gPFS). The surface characteristics of the gPFS-treated SiO<SUB>2</SUB> dielectrics and the crystal structure and grain growth of the overlying organic semiconductors are investigated. Various semiconductor materials are employed for the OFETs prepared with gPFS-treated SiO<SUB>2</SUB> dielectrics, including vacuum-processed pentacene, <I>N</I>,<I>N</I>-ditridecyl-3,4,9,10-perylenetetracarboxylic diimide, solution-processed 5,11-bis(triethylsilylethynyl)anthradithiophene, and poly[2,5-bis(2-octyldodecyl)pyrrolo[3,4-<I>c</I>]pyrrole-1,4(2<I>H</I>,5<I>H</I>)-dione-(<I>E</I>)-1,2-di(2,2′-bithiophen-5-yl)ethane. Three OFETs are prepared with different dielectrics: (i) bare SiO<SUB>2</SUB>, (ii) gPFS-treated SiO<SUB>2</SUB>, and (iii) perfluorooctyltriethoxysilane-treated SiO<SUB>2</SUB>. The OFETs prepared with the gPFS-treated SiO<SUB>2</SUB> dielectrics display the highest mobilities and smallest hysteresis. Furthermore, the gPFS-treated SiO<SUB>2</SUB> provides the best device stability under a sustained gate bias, suggesting that the gPFS surface minimize the number of traps present in the OFET.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/cmatex/2014/cmatex.2014.26.issue-22/cm5030266/production/images/medium/cm-2014-030266_0011.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/cm5030266'>ACS Electronic Supporting Info</A></P>

Effects of gammma-ray radiation on mycelium growth and ITS sequences of shiitake mushroom (Lentinula edodes)

Kim Kwang-Sang,Kim Kyung-Je,Ban Seung-Eon,Kim Yu-Seon,Hong Seul-Gi,Jang Eun-Kyoung 한국버섯학회 2010 한국버섯학회 국제학술대회 Vol.6 No.-