The 8th Biennial Meeting of the Asian Society of Gynecologic Oncology, December 1st to 3rd, 2023

Heng-Cheng Hsu,김재원,박정열,서동훈,김세익,Jen-Ruei Chen,Peng-Hui Wang 대한부인종양학회 2024 Journal of Gynecologic Oncology Vol.35 No.2

As per the 2018 GLOBOCAN database, Asia accounted for 48.7% (637,761) of new gynecologiccancer cases and 50.1% (305,000) of gynecologic cancer deaths [1]. Recognizing the distinctdifferences in genetic background, cancer epidemiology, disease characteristics, and socio-cultural environment between Asian and non-Asian women, it is noteworthy that much ofthe experimental evidence guiding clinical gynecologic oncology practices has historicallybeen drawn from studies in Western populations. Established in 2008, the Asian Society ofGynecologic Oncology (ASGO) ser ves as a key organization in Asia, dedicated to advancingthe study, prevention, and treatment of gynecological cancer through scientific exchange,regional/international collaboration, educational initiatives, and fostering camaraderieamong its members [2]. Presently, ASGO boasts members from over 10 countries in Asia. Building on the success of the previous meetings held in Tokyo (2009) [3], Seoul (2011)[4], Kyoto (2013) [5], Seoul (2015) [6], Tokyo (2017) [7], Incheon (2019) [8], and Bangkok(2021) [9], the eighth Biennial Meeting of ASGO took place at the state-of-the-art HNBKInternational Convention Center in Taipei, Taiwan, from December 01 to 03, 2023. Theoverarching theme for this event was “Reunion to Overcome Gynecologic Cancer in Asia.”Notably, due to the impact of the coronavirus disease 2019 pandemic in 2021, the meetingwas transformed into a hybrid format. This gathering marked a significant milestone as thefirst in-person Pan-Asia meeting focused on gynecological cancer following the pandemic. Additionally, it is worth highlighting that this was the inaugural ASGO meeting held outsideof Korea and Japan, underscoring the broadening geographical scope and global impactof the conference. Professor Peng-Hui Wang and Jae-Weon Jim chaired the organizingcommittee. ASGO 2023 witnessed the participation of 633 attendees from 17 countries,featuring 152 honored speakers and chairs from 12 countries. The event included 44 oral/surgical video presentations and 187 poster presentations, covering a diverse range ofscientific topics, from fundamental principles of gynecological cancer care to advanced, high-technology practices rooted in cutting-edge research (Table 1). Photos from the meetingare accessible on the official meeting website (http://tinyurl.com/26xtts2f ).

Breastfeeding and Ovarian Cancer Risk: a Systematic Review and Meta-analysis of 40 Epidemiological Studies

Li, Da-Peng,Du, Chen,Zhang, Zuo-Ming,Li, Guang-Xiao,Yu, Zhi-Fu,Wang, Xin,Li, Peng-Fei,Cheng, Cheng,Liu, Yu-Peng,Zhao, Ya-Shuang Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.12

The present systematic review and meta-analysis was conducted to assess any association between breastfeeding and the risk of ovarian cancer. A systematic search of published studies was performed in PUBMED and EMBASE and by reviewing reference lists from retrieved articles through March 2013. Data extraction was conducted independently by two authors. Pooled relative risk ratios were calculated using random-effect models. Totals of 5 cohort studies and 35 case-control studies including 17,139 women with ovarian cancer showed a 30% reduced risk of ovarian cancer when comparing the women who had breastfed with those who had never breastfed (pooled RR = 0.70, 95% CI: 0.64-0.76; p = 0.00), with significant heterogeneity in the studies (p = 0.00; I2 = 76.29%). A significant decreasd in risk of epithelial ovarian cancer was also observed (pooled RR = 0.68, 95% CI: 0.61-0.76). When the participants were restricted to only parous women, there was a slightly attenuated but still significant risk reduction of ovarian cancer (pooled RR = 0.76, 95% CI: 0.69-0.83). For total breastfeeding duration, the pooled RRs in the < 6 months, 6-12 months and > 12 months of breastfeeding subgroups were 0.85 (95% CI: 0.77-0.93), 0.73 (95% CI: 0.65-0.82) and 0.64 (95%CI: 0.56-0.73), respectively. Meta-regression of total breastfeeding duration indicated an increasing linear trend of risk reduction of ovarian cancer with the increasing total breastfeeding duration (p = 0.00). Breastfeeding was inversely associated with the risk of ovarian cancer, especially long-term breastfeeding duration that demonstrated a stronger protective effect.

Optimal Design and Dynamic Control of Construction Dewatering with the Consideration of Dewatering Process

Cheng-hua Shi,Cheng-yong Cao,Ming-feng Lei,Li-min Peng,Jing Jiang 대한토목학회 2017 KSCE Journal of Civil Engineering Vol.21 No.4

Design optimization of construction dewatering has important values in protecting the surrounding environment and reducing the engineering cost. The existing dewatering design methods are mostly based on the optimization of pumping rate needed to maintain a stable water level, while the drop and rise of water level are not considered in the estimation of pumping rate and dewatering time. The dynamics process of construction dewatering is taken into account in this article. The method for calculating the total water yield and dewatering time from the initial groundwater level to the target water level is established. Then, the design optimization of well group dewatering is provided with the consideration of total water yield and dewatering time in dynamic dewatering process. Finally, the method for the calculation of total water yield and dewatering time when dewatering regions change is derived. The proposed method can realize design optimization and dynamic control of dewatering as the dewatering regions and water level changes in construction. The reliability of this method is verified in on-site engineering applications.

Numerical and experimental investigation on the global performance of a novel design of a Low Motion FPSO

Peng, Cheng,Mansour, Alaa M.,Wu, Chunfa,Zuccolo, Ricardo,Ji, Chunqun,Greiner, Bill,Sung, Hong Gun Techno-Press 2018 Ocean systems engineering Vol.8 No.4

Floating Production Storage and Offloading (FPSO) units have the advantages of their ability to provide storage and offloading capabilities which are not available in other types of floating production systems. In addition, FPSOs also provide a large deck area and substantial topsides payload capacity. They are in use in a variety of water depths and environments around the world. It is a good solution for offshore oil and gas development in fields where there is lack of an export pipeline system to shore. However due to their inherently high motions in waves, they are limited in the types of risers they can host. The Low Motion FPSO (LM-FPSO) is a novel design that is developed to maintain the advantages of the conventional FPSOs while offering significantly lower motion responses. The LM-FPSO design generally consists of a box-shape hull with large storage capacity, a free-hanging solid ballast tank (SBT) located certain distance below the hull keel, a few groups of tendons arranged to connect the SBT to the hull, a mooring system for station keeping, and a riser system. The addition of SBT to the floater results in a significant increase in heave, roll and pitch natural periods, mainly through the mass and added mass of the SBT, which significantly reduces motions in the wave frequency range. Model tests were performed at the Korea Research Institute of Ships & Ocean Engineering (KRISO) in the fall of 2016. An analytical model of the basin model (MOM) was created in Orcaflex and calibrated against the basin-model. Good agreement is achieved between global performance results from MOM's predictions and basin model measurements. The model test measurements have further verified the superior motion response of LM-FPSO. In this paper, numerical results are presented to demonstrate the comparison and correlation of the MOM results with model test measurements. The verification of the superior motion response through model test measurements is also presented in this paper.

Transcriptome sequencing provides insights into the metabolic pathways of patchouli alcohol and pogostone in Pogostemon cablin (Blanco) Benth

Cheng Peng,Yang He,Cao Deng,Liang Xiong,Shishang Qin 한국유전학회 2016 Genes & Genomics Vol.38 No.11

Pogostemon cablin (Blanco) Benth. is an important medicinal plant; however, its molecular biology remains largely unexplored. Here, we report the results of whole transcriptome-wide analyses of P. cablin using nextgeneration sequencing technology. In the present study, we generated 108,996 unigenes using RNA sequencing data. Among these unigenes, 65,536 were annotated in the NR database. There were 40,670 intact open reading frames (ORFs), which accounted for 69 % of the 58,820 predicted ORFs, demonstrating that our assembled transcriptome was of high quality. Gene expression levels in the leaf and stem were quantified, and 18,481 unigenes (17 %) were determined to be significantly differentially expressed. The patchouli alcohol (PA) and pogostone (PO) metabolic pathway of P. cablin was also reconstructed, and among the 17 putative homologs to PA and PO biosynthesis-related genes, seven were significantly upregulated in the stems, and three genes were significantly upregulated in the leaves. The correlation between the essential oil contents of P. cablin and the potentially pivotal genes for PA and PO production were identified. Considering that the contents of PA and PO in leaves and stems are markedly different in the same plant and we did not detect any pattern in the expression levels of candidate genes between leaves and stems, we speculate that after the biosynthesis, more PA probably accumulates in the leaves, and more PO in the stems of P. cablin. The transcriptome of P. cabin will facilitate further researches on the molecular system biology of the Pogostemon genus, as well as the in-depth studyies of PA and PO biosynthesis and its potential applications for genetic engineering.

Comparison of the Gene Expression Profiles Between Smokers With and Without Lung Cancer Using RNA-Seq

Cheng, Peng,Cheng, You,Li, Yan,Zhao, Zhenguo,Gao, Hui,Li, Dong,Li, Hua,Zhang, Tao Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.8

Lung cancer seriously threatens human health, so it is important to investigate gene expression changes in affected individuals in comparison with healthy people. Here we compared the gene expression profiles between smokers with and without lung cancer. We found that the majority of the expressed genes (threshold was set as 0.1 RPKM) were the same in the two samples, with a small portion of the remainder being unique to smokers with and without lung cancer. Expression distribution patterns showed that most of the genes in smokers with and without lung cancer are expressed at low or moderate levels. We also found that the expression levels of the genes in smokers with lung cancer were lower than in smokers without lung cancer in general. Then we detected 27 differentially expressed genes in smokers with versus without lung cancer, and these differentially expressed genes were foudn to be involved in diverse processes. Our study provided detail expression profiles and expression changes between smokers with and without lung cancer.

Heavy metal removal from aqueous solution by granular hydrated Portland cement

Peng Cheng,Yongxiang Ren,Lei Yang,Rituan Li,Xue Wang,Bin Li,Honglin Yuan 한국화학공학회 2022 Korean Journal of Chemical Engineering Vol.39 No.12

Granular hydrated Portland cement (HPC) was prepared as adsorbent to remove heavy metals in aqueoussolution. Batch experiment results confirmed that heavy metals were removed through a combination of adsorptionand precipitation. Adsorption played a more important role in the initial stage of the removal process or at lower concentrationsof the heavy metals. After adsorption equilibrium was obtained in two days, the removal process continuedfor about three days due to the precipitation. Besides precipitation, the maximum Langmuir adsorption capacity reached132.27, 87.14, 123.43 and 112.05mg/g for Pb, Cu, Zn, and Cd, respectively. When various heavy metals coexisted, theremoval capacity followed the order of Cu>Pb>Cd>Zn. The adsorption on the surfaces of HPC was mainly governedby surface precipitation and Ca2+ exchange, as suggested by XRD, SEM-EDS and released Ca2+ results. Most of theadsorbed heavy metals on the HPC and the precipitation formed in the liquid phase were stable under neutral andalkaline conditions. Overall, HPC particles exhibited a large potential for heavy metal removal. When cement-relatedmaterials containing HPC are employed for heavy metal removal, the dissolution of the precipitate at low pH mightfacilitate the migration of the heavy metals.

Two New Phenolic Glycosides from Hypoxis aurea Lour

Cheng, Zhong-Quan,Yang, Dan,Liu, Yu-Qing,Hu, Jiang-Miao,Jiang, He-Zhong,Wang, Peng-Cheng,Li, Ning,Zhou, Jun,Zhao, You-Xing Korean Chemical Society 2009 Bulletin of the Korean Chemical Society Vol.30 No.10

Research Trend on Water Tank Automation

Peng Cheng,Garima Nautiyal 사단법인 미래융합기술연구학회 2017 아시아태평양융합연구교류논문지 Vol.3 No.4

his paper aims to present a new concept of automatic tank filling system. A typical household water tank uses a ball mechanism to control the filling of water in the tank. The process is not automatic as the motor used has to be operated manually. The automatic systems uses costly electronic sensors. The new concept which is being presented is without the use of any electronic component. The idea behind the water tank automation is that as soon the water level goes down at 10%, the motor automatically switches on and as soon the water level reaches to 90% of the total height, the motor automatically switches off. This process is controlled and automated using a programmable logic controller (PLC) through a ladder logic. Water tank automation will aid in an increased energy saving. This paper aims to present a new concept of automatic tank filling system. A typical household water tank uses a ball mechanism to control the filling of water in the tank. The process is not automatic as the motor used has to be operated manually. The automatic systems uses costly electronic sensors. The new concept which is being presented is without the use of any electronic component. The idea behind the water tank automation is that as soon the water level goes down at 10%, the motor automatically switches on and as soon the water level reaches to 90% of the total height, the motor automatically switches off. This process is controlled and automated using a programmable logic controller (PLC) through a ladder logic. Water tank automation will aid in an increased energy saving.

Deformation Characteristics and Countermeasures of shallow and Large-span Tunnel Under-crossing the Existing Highway in Soft Soil: a Case Study

Cheng-yong Cao,Cheng-hua Shi,Ming-feng Lei,Li-min Peng,Ruxue Bai 대한토목학회 2018 KSCE JOURNAL OF CIVIL ENGINEERING Vol.22 No.8

Hongmian Road goes under Jihe highway by the way of tunnel in Shenzhen City, Guangdong Province, China. The tunnel hassome special characteristics such as shallow depth, large span, soft soil, busy traffic, and long distance under-crossing the operatinghighway, thus there is great difficulty and risk during its construction. A series of in-situ tests were conducted to reveal deformationcharacteristics during tunneling beneath the existing highway by the double-side-drift method (DSDM). The results show that initialconstruction method and measures can't meet the safety requirement of tunnel construction, and the level of risk is extremely high, sothe construction method need to be timely adjusted. By comprehensive analysis, the double-side-drift optimum method (DSDOM) isput forward, on the basis of which a series of optimum measures also have been put forward, such as reasonable constructionmethods, the suitable length of bench and excavation, soil reinforcement measures on tunnel face, optimizing construction process,closing primary support in time and speeding up the construction of secondary lining. Then the feasibility of this optimizedconstruction method and measures are verified by the numerical simulations. Finally, from feedbacks of monitoring results, theoptimum method and measures have been proved to be reasonable and feasible, and they can guarantee a successful pass beneath theoperating highway.