Discriminative detection of indoor volatile organic compounds using a sensor array based on pure and Fe-doped In₂O₃ nanofibers

Lee, Chul-Soon,Li, Hua-Yao,Kim, Bo-Young,Jo, Young-Moo,Byun, Hyung-Gi,Hwang, In-Sung,Abdel-Hady, Faissal,Wazzan, Abdulaziz A.,Lee, Jong-Heun Elsevier 2019 Sensors and actuators. B Chemical Vol.285 No.-

<P><B>Abstract</B></P> <P>Representative indoor volatile organic compounds (VOCs) such as benzene, xylene, toluene, formaldehyde, and ethanol need to be detected in a highly sensitive and discriminative manner because of their different impact on human health. In this study, pure and 0.05, 0.1, 0.3, and 0.5 at% Fe-doped In<SUB>2</SUB>O<SUB>3</SUB> nanofibers were prepared by electrospinning and their gas sensing characteristics toward the aforementioned VOCs were investigated. The doping of In<SUB>2</SUB>O<SUB>3</SUB> nanofiber sensor with 0.05 and 0.1 at% Fe shifted the temperature to show the maximum responses to benzene, xylene, and toluene, and reduced responses to ethanol and formaldehyde, thus demonstrating changed gas selectivity. The gas sensing characteristics of 0.5 at% Fe-doped In<SUB>2</SUB>O<SUB>3</SUB> nanofiber sensor were substantially different from those of the other sensors. Significantly different gas sensing patterns of pure and Fe-doped In<SUB>2</SUB>O<SUB>3</SUB> sensors could be used to discriminate between the five different VOCs at 375 °C and to distinguish between the aromatic and non-aromatic gases at all sensing temperatures. The mechanism underlying the Fe-induced change in gas sensing characteristics has been discussed in relation to the variation of catalytic activity, morphology, oxygen adsorption, and charge carrier concentration.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Fabrication of a sensor array using pure and Fe-doped In<SUB>2</SUB>O<SUB>3</SUB> nanofibers. </LI> <LI> Discriminative detection of benzene, xylene, toluene, ethanol, and formaldehyde. </LI> <LI> Distinction between aromatic and non-aromatic indoor pollutants using sensor array. </LI> <LI> Gas sensing mechanism underlying Fe-induced change in response and selectivity. </LI> </UL> </P>

Highly discriminative and sensitive detection of volatile organic compounds for monitoring indoor air quality using pure and Au-loaded 2D In₂O₃ inverse opal thin films

Lee, Chul-Soon,Dai, Zhengfei,Kim, Do Hong,Li, Hua-Yao,Jo, Young-Moo,Kim, Bo-Young,Byun, Hyung-Gi,Hwang, Insung,Lee, Jong-Heun Elsevier 2018 Sensors and actuators. B Chemical Vol.273 No.-

<P><B>Abstract</B></P> <P>The lack of gas selectivity in oxide semiconductor chemiresistors has long been an obstacle to realizing discriminative detection of indoor volatile organic compounds (VOCs) with different health impacts. A simple and reliable algorithm to discriminate between critically harmful aromatic VOCs (benzene, xylene, and toluene) and less harmful ethanol is suggested by the simple combination of sensor signals from pure In<SUB>2</SUB>O<SUB>3</SUB> and Au-loaded In<SUB>2</SUB>O<SUB>3</SUB> 2D inverse opal (IO) thin films prepared by heat-treating the precursor-dipped self-assembled polystyrene templates and Au deposition. The Au-loaded In<SUB>2</SUB>O<SUB>3</SUB> IO sensor showed unprecedentedly high responses to 5 ppm ethanol (resistance ratio = 1640.2) and comparably high responses to 5 ppm benzene, <I>p-</I>xylene, and toluene (resistance ratio range of 674.5–1012.9). Such high gas responses were attributed to the periodically porous and thus highly gas-accessible structures, while the clear discrimination between aromatic VOCs and ethanol was achieved by tuning gas selectivity through systematic control of the size, morphology, and loading concentration of Au nano-catalysts. The results of this study can be used for reliable and precise monitoring of indoor air pollutants.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Discriminative detection of indoor pollutant gases using Au-In<SUB>2</SUB>O<SUB>3</SUB> 2D Inverse Opals. </LI> <LI> Selective and sensitive detection of ethanol using In<SUB>2</SUB>O<SUB>3</SUB> 2D Inverse Opals. </LI> <LI> Ultrahigh response (resistance ratio = ∼1000) of Au-In<SUB>2</SUB>O<SUB>3</SUB> sensor to 5 ppm <I>p</I>-xylene. </LI> <LI> A simple and reliable algorithm for gas selectivity using two-sensor array. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

A Study on Cutting and Tribology Performances of TiN and TiAlN Coated Tools

Li, Hua-Ying,He, Hui-Bo,Han, Wen-Qiang,Yang, Jun,Gu, Tao,Li, Yuan-ming,Lyu, Sung-Ki Korean Society for Precision Engineering 2015 International Journal of Precision Engineering and Vol.16 No.4

TiN and TiAlN coatings were deposited on the surface of AISI 5140 steel and cemented carbide YT15 by magnetron sputtering technique (MSP). The reciprocating sliding tests of TiN and TiAIN coatings on the surface of AISI 5140 steel were performed to investigate the friction coefficients of coatings affected by various normal loads with friction pair of 304 stainless steel balls. Dry machining tests on AISI 5140 hardened steel were carried out with the TiN and TiAlN coated tools on a CA6140A lathe. The effects of cutting speed on cutting forces and surface roughness of TiN and TiAlN coated tools were obtained and analyzed to assess the cutting performance of coated tools. The microcosmic micrographs of wear areas of coated tools were observed and investigated by scanning electron microscope and energy dispersive spectrum. The results show that the friction coefficients of TiN coatings are lower than that of TiAlN coatings. The cutting force of TiAlN coated tool decreases and flank wear resistance enhances in comparison with TiN coated tool. The wear form and mechanisms of TiN coated tool are mainly crater wear on the rake face and adhesive wear and abrasive wear on the flank face. The wear form and mechanisms of TiAlN coated tool are mainly adhesive wear, the breakage of cutting edge and the damage of tip, accompanied with diffusion and oxidation wear.

Isolation, Culture and Identification of Porcine Skeletal Muscle Satellite Cells

Bo-jiang Li,Ping-hua Li,Rui=hua Huang,Wen-xing Sun,Han Wang,Qi-fa Li,Jie Chen,Wang Jun Wu,Honglin Liu 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.8

The objective of this study was to establish the optimum protocol for the isolation and culture of porcine muscle satellite cells. Mononuclear muscle satellite cells are a kind of adult stem cell, which is located between the basal lamina and sarcolemma of muscle fibers and is the primary source of myogenic precursor cells in postnatal muscle. Muscle satellite cells are a useful model to investigate the mechanisms of muscle growth and development. Although the isolation and culture protocols of muscle satellite cells in some species (e.g. mouse) have been established successfully, the culture system for porcine muscle satellite cells is very limited. In this study, we optimized the isolation procedure of porcine muscle satellite cells and elaborated the isolation and culture process in detail. Furthermore, we characterized the porcine muscle satellite cells using the immunofluorecence. Our study provides a reference for the isolation of porcine muscle satellite cells and will be useful for studying the molecular mechanisms in these cells.

Molecular and Biochemical Characterization of a Novel Xylanase from Massilia sp. RBM26 Isolated from the Feces of Rhinopithecus bieti

( Bo Xu ),( Li Ming Dai ),( Jun Jun Li ),( Meng Deng ),( Hua Biao Miao ),( Jun Pei Zhou ),( Yue Lin Mu ),( Qian Wu ),( Xiang Hua Tang ),( Yun Juan Yang ),( Jun Mei Ding ),( Nan Yu Han ),( Zun Xi Huang 한국미생물 · 생명공학회 2016 Journal of microbiology and biotechnology Vol.26 No.1

Xylanases sourced from different bacteria have significantly different enzymatic properties. Therefore, studying xylanases from different bacteria is important to their applications in different fields. A potential xylanase degradation gene in Massilia was recently discovered through genomic sequencing. However, its xylanase activity remains unexplored. This paper is the first to report a xylanase (XynRBM26) belonging to the glycosyl hydrolase family (GH10) from the genus Massilia. The gene encodes a 383-residue polypeptide (XynRBM26) with the highest identity of 62% with the endoxylanase from uncultured bacterium BLR13. The XynRBM26 expressed in Escherichia coli BL21 is a monomer with a molecular mass of 45.0 kDa. According to enzymatic characteristic analysis, pH 5.5 is the most appropriate for XynRBM26, which could maintain more than 90% activity between pH 5.0 and 8.0. Moreover, XynRBM26 is stable at 37°C and could maintain at least 96% activity after being placed at 37°C for 1 h. This paper is the first to report that GH10 xylanase in an animal gastrointestinal tract (GIT) has salt tolerance, which could maintain 86% activity in 5 M NaCl. Under the optimum conditions, Km, Vmax, and kcat of XynRBM26 to beechwood xylan are 9.49 mg/ml, 65.79 μmol/min/mg, and 47.34 /sec, respectively. Considering that XynRBM26 comes from an animal GIT, this xylanase has potential application in feedstuff. Moreover, XynRBM26 is applicable to high-salt food and seafood processing, as well as other high-salt environmental biotechnological fields, because of its high catalytic activity in high-concentration NaCl.

Isolation, Culture and Identification of Porcine Skeletal Muscle Satellite Cells

Li, Bo-jiang,Li, Ping-hua,Huang, Rui-hua,Sun, Wen-xing,Wang, Han,Li, Qi-fa,Chen, Jie,Wu, Wang-jun,Liu, Hong-lin Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.8

The objective of this study was to establish the optimum protocol for the isolation and culture of porcine muscle satellite cells. Mononuclear muscle satellite cells are a kind of adult stem cell, which is located between the basal lamina and sarcolemma of muscle fibers and is the primary source of myogenic precursor cells in postnatal muscle. Muscle satellite cells are a useful model to investigate the mechanisms of muscle growth and development. Although the isolation and culture protocols of muscle satellite cells in some species (e.g. mouse) have been established successfully, the culture system for porcine muscle satellite cells is very limited. In this study, we optimized the isolation procedure of porcine muscle satellite cells and elaborated the isolation and culture process in detail. Furthermore, we characterized the porcine muscle satellite cells using the immunofluorecence. Our study provides a reference for the isolation of porcine muscle satellite cells and will be useful for studying the molecular mechanisms in these cells.

A Study on Cutting and Tribology Performances of TiN and TiAlN Coated Tools

Hua-Ying Li,Hui-Bo He,Wen-Qiang Han,Jun Yang,Tao Gu,Yuan-ming Li,류성기 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

TiN and TiAlN coatings were deposited on the surface of AISI 5140 steel and cemented carbide YT15 by magnetron sputteringtechnique (MSP). The reciprocating sliding tests of TiN and TiAIN coatings on the surface of AISI 5140 steel were performed toinvestigate the friction coefficients of coatings affected by various normal loads with friction pair of 304 stainless steel balls. Drymachining tests on AISI 5140 hardened steel were carried out with the TiN and TiAlN coated tools on a CA6140A lathe. The effectsof cutting speed on cutting forces and surface roughness of TiN and TiAlN coated tools were obtained and analyzed to assess thecutting performance of coated tools. The microcosmic micrographs of wear areas of coated tools were observed and investigated byscanning electron microscope and energy dispersive spectrum. The results show that the friction coefficients of TiN coatings are lowerthan that of TiAlN coatings. The cutting force of TiAlN coated tool decreases and flank wear resistance enhances in comparison withTiN coated tool. The wear form and mechanisms of TiN coated tool are mainly crater wear on the rake face and adhesive wear andabrasive wear on the flank face. The wear form and mechanisms of TiAlN coated tool are mainly adhesive wear, the breakage ofcutting edge and the damage of tip, accompanied with diffusion and oxidation wear.

Evaluation of Several Screening Approaches for Detection of Cervical Lesions in Rural Shandong, China

Zong, Li-Ju,Zhang, You-Zhong,Yang, Xing-sheng,Jiang, Jie,Cui, Bao-Xia,Qiao, Yun-Bo,Li, Li,Jiang, Kan,Zhang, Wen-Jing,Kong, Bei-Hua,Shen, Keng Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.5

Purpose: The study was designed to: (1) investigate the prevalence of high-risk human papillomavirus (HR-HPV) infection and cervical neoplasia; and (2) evaluate clinical performance of visual inspection with acetic acid/ Lugol's iodine (VIA /VILI), Pap smear, high-risk human papillomavirus (HR-HPV) DNA test for detecting cervical intraepithelial neoplasia grade 2 or worse (CIN2+) and (3) explore appropriate screening approach in rural areas of Shandong Province. Materials and Methods: A total of 3,763 eligible women from Yiyuan County in Yimeng mountainous areas of rural Shandong, China, were enrolled and underwent Pap smear, HR-HPV DNA testing by Hybrid Capture 2 (HC2), and VIA /VILI tests. Women positive in any test were referred to colposcopy and biopsy as indicated. Results: The prevalence of HR-HPV infection among all enrolled women was 11.1% and that in healthy women was 9.9%. In total 33 cases of CIN1, 16 cases of CIN2, 6 cases of CIN3 but none of cervical cancer were detected and the crude prevalence of CIN2+ was 0.58%. For detecting CIN2+, the sensitivity of HR-HPV DNA testing, VIA/VILI, Pap smear was 90.9%, 77.3%, 81.8%, respectively. Pap smear had the best specificity of 98.2%, followed by HR-HPV DNA testing with specificity of 89.4%, VIA/VILI had the lowest specificity of 81.2%. Colposcopy referral rate of HR-HPV DNA testing, VIA/VILI, Pap smear was 11.1%, 18.5%, 2.3%, respectively. Conclusions: Our results suggest that HR-HPV DNA testing alone might be appropriate for primary cervical cancer screening in rural low-resource areas of Shandong Province, China.

Identification of Specific Gene Modules in Mouse Lung Tissue Exposed to Cigarette Smoke

Xing, Yong-Hua,Zhang, Jun-Ling,Lu, Lu,Li, De-Guan,Wang, Yue-Ying,Huang, Song,Li, Cheng-Cheng,Zhang, Zhu-Bo,Li, Jian-Guo,Xu, Guo-Shun,Meng, Ai-Min Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.10

Background: Exposure to cigarette may affect human health and increase risk of a wide range of diseases including pulmonary diseases, such as chronic obstructive pulmonary disease (COPD), asthma, lung fibrosis and lung cancer. However, the molecular mechanisms of pathogenesis induced by cigarettes still remain obscure even with extensive studies. With systemic view, we attempted to identify the specific gene modules that might relate to injury caused by cigarette smoke and identify hub genes for potential therapeutic targets or biomarkers from specific gene modules. Materials and Methods: The dataset GSE18344 was downloaded from the Gene Expression Omnibus (GEO) and divided into mouse cigarette smoke exposure and control groups. Subsequently, weighted gene co-expression network analysis (WGCNA) was used to construct a gene co-expression network for each group and detected specific gene modules of cigarette smoke exposure by comparison. Results: A total of ten specific gene modules were identified only in the cigarette smoke exposure group but not in the control group. Seven hub genes were identified as well, including Fip1l1, Anp32a, Acsl4, Evl, Sdc1, Arap3 and Cd52. Conclusions: Specific gene modules may provide better understanding of molecular mechanisms, and hub genes are potential candidates of therapeutic targets that may possible improve development of novel treatment approaches.

Two new benzylisoquinoline alkaloids from Thalictrum foliolosum and their antioxidant and in vitro antiproliferative properties

Da-Hong Li,Jia Guo,Wen Bin,Nan Zhao,Kai-bo Wang,Jian-yong Li,Zhan-Lin Li,Hui-Ming Hua 대한약학회 2016 Archives of Pharmacal Research Vol.39 No.7

Two novel rare chloro-containing benzylisoquinolinealkaloids, thalfoliolosumines A (1) and B (2),along with eight known isoquinoline alkaloids (3–10) wereisolated from the whole plant of Thalictrum foliolosum. The structures of these compounds were elucidated byspectral analyses, including 1D and 2D NMR (COSY,HSQC, HMBC and NOESY) experiments. The antiproliferativeeffects of all the isolated compounds were evaluatedby MTT method against MCF-7, PC-3, and U937cells, and trypan blue method against HL-60 cells. Newcompounds 1 and 2 exhibited moderate in vitro antiproliferativeactivity against MCF-7, PC-3, and HL-60 cells,and good inhibitory effects against U937 cells with IC50values of 7.50 and 6.97 μM, respectively. Compounds 7and 10 showed the strongest in vitro antiproliferative withIC50 values of 0.93 and 1.69 lM against HL-60 cell line. The antioxidant properties were also measured, bisbenzyltetrahydroisoquinolinealkaloids 3–6 showed the strongestantioxidant activities in ABTS assay.