http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
상악 유전치부의 치간공간과 인접면 우식에 관한 조사연구
김진영,이광희,라지영,안소연,정승열,임경욱,반재혁 大韓小兒齒科學會 2009 大韓小兒齒科學會誌 Vol.36 No.3
본 연구는 상악 유전치부의 치간공간과 인접면 우식의 상관관계를 평가해보고자 하였다. 익산에 거주하는 만3-7세의 어린이 555명을 대상으로 하였으며 탐침이 통과하는지 여부로 치간공간이 있음과 없음으로 분류하였고 와동이 형성되었거나 법랑질 표면이 연화되었을 경우 인접면 우식이 존재하는 것으로 판단하였다. 연구 결과 다음과 같은 결론을 얻었다. 1. 상악 유전치부의 치간공간은 영장류 공간이 77.4%, 발육공간이 유측절치와 유중절치 사이에서 54.4%, 양유중절치 사이에서 39.0%로 나타났다. 2. 인접면 우식발생율은 우측유견치가 6.3%, 우측유측절치가 14.7%, 우측유중절치가 33.5%, 좌측유중절치가 33.7%, 좌측유측절치가 16.0%, 좌측유견치가 4.7%로 나타났다. 3. 치간공간의 수가 많을수록 상악 유전치의 우식발생율은 낮아졌으나 그 상관관계(r=0.024)는 미약하였다. 4. 상악 유전치부에 공간이 존재하지 않을 경우 존재할 때 보다 평균 우식발생율이 높았으며, 치간공간이 전혀 존재하지 않는 경우 한 곳이라도 치간공간이 존재하는 경우보다 평균 우식발생율이 2배 이상 높은 것으로 나타났다. The purpose of this study was to assess the relationship between interdental spaces and proximal caries in maxillary anterior primary teeth. 555 children aged 3-7 inhabit in Iksan were divided into two groups, depending on the presence of interdental space which was detected by a dental explorer. They were determined to have proximal caries if cavity was formed or the enamel surface was softened. The results were as follows : 1. Regarding interdental spaces, 77.4% had primate spaces; 54.4% had developmental spaces between central and lateral incisor, and 39.0% between central incisors. 2. Interproximal caries incidences in right primary canine, lateral incisor, and central incisor were 6.3%, 14.7%, and 33.5%, respectively. Also interproximal caries incidences in left primary central incisor, lateral incisor, and canine were 33.7%, 16.0%, and 4.7%, respectively. 3. Children with more interdental spaces had less caries incidence, but the relationship was weak(r=-0.024). 4. The mean caries incidence was higher in absence of interdental space of maxillary primary incisors than in presence of space. The mean caries incidence with no interdental space was twice as high as that with presence of interdental space.
Seung Eon Moon,박배호,Eun-Kyoung Kim,류한철,Jong Hyurk Park,Kang-Ho Park,Kwang Yong Kang,Min Hwan Kwak,이수재,Sunglyul Maeng,Young Tae Kim 한국물리학회 2006 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.49 No.3
Highly oriented polycrystalline nickel-oxide films were grown on Pt (111) substrates moderately heated by using a non-reactive pulsed laser deposition method. The oxygen pressure of the process vacuum was varied from 1 to 200 mTorr to study its effect on the composition with the other parameters fixed. The oxygen-pressure-dependent compositional, structural, and electrical properties of the nickel-oxide films were investigated by using X-ray diffraction, atomic force microscopy, scanning electron microscopy, and current-voltage measurements. From the measurements, the oxygen content during deposition was an important factor for the structural properties and for reproducible resistance-switching characteristics.
사다리형 폴리실세스퀴옥세인과 POSS를 포함하는 하이브리드 폴리이미드 복합체의 합성 및 특성 분석
이승훈(Seung-Hun Lee),노지영(Ji-Young Noh),김태은(Tae-Eun Kim),박노형(No-Hyeong Park),김기영(Ki-Young Kim),임정혁(Jung-Hyurk Lim),김경민(Kyung-Min Kim) 한국고분자학회 2020 폴리머 Vol.44 No.2
1,3-bis(4-aminophenoxy)benzene(APB)과 3,3",4,4"-benzophenonetetracarboxylic dianhydride(BTDA)의 조성에 여덟개의 페닐기를 함유한 케이지 구조의 실세스퀴옥세인(octaphenyl-POSS, OPS)과 페닐과 에폭시 그룹이 각각 8대2 비율로 함유된 사다리형 폴리실세스퀴옥세인(LPS)을 혼합하여 내열성 및 절연성이 우수한 하이브리드 폴리이미드 복합체를 제조하였다. 제조된 하이브리드 폴리이미드 필름은 OPS의 중량을 2.5 wt%로 고정시키고, LPS의 중량비를 다양(1.5, 2.5, 3.5 wt%)하게 변화시켜 합성하였다. OPS는 물리적인 결합을 이용하여 poly(amic acid)(PAA) 용액에 균일하게 분산시켰으며, LPS의 경우에는 화학적인 결합을 이용하기 위하여 LPS의 에폭시 그룹과 PAA의 아민 그룹과의 에폭시-아민 반응을 이용하였다. 얻어진 하이브리드 폴리이미드 복합체의 내열 특성, 광학 성질, 유전상수와 모폴로지를 측정하기 위하여 퓨리에 변환 적외선 분광기(FTIR), 열 중량 분석기(TGA), 분광광도계(microspectrometer), 임피던스기(RF impedance) 그리고 전계방사형 주사전자현미경(FE-SEM)과 주사탐침현미경(AFM)을 사용하였다. 또한 제조된 하이브리드 폴리이미드 매트릭스 내에 Si 원소가 균일하게 분산돼 있는 것은 EDS mapping으로 확인하였다. In this study, we used the POSS cage with eight phenyl groups (octaphenyl-POSS, OPS) and ladder-like polysilsesquioxane (LPS) having phenyl and epoxy groups in 8:2 ratio in the composition of 1,3-bis(4-aminophenoxy)benzene (APB) and 3,3",4,4"-benzophenonetetracarboxylic dianhydride (BTDA) to synthesize hybrid polyimide composites with high thermal stability and excellent electrical insulating property. The hybrid polyimide composites had various LPS weight ratios (1.5, 2.5, 3.5 wt%) with the fixed 2.5 wt% of OPS. OPS was homogeneously dispersed in the solution of poly(amic acid) (PAA) via physical bonding interaction and the epoxy groups of LPS were chemically reacted with the residual terminal amines of PAA. The thermal and optical properties, dielectric constant, morphology of the hybrid polyimide composites were determined using infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), microspectrometer, RF Impedance, field emission scanning electron microscope (FE-SEM), and atomic force microscope (AFM). Also, we confirmed that Si atom was uniformly dispersed in polyimide matrix by using EDS mapping.
사무실 공간의 냉방시 천장 및 바닥 급기 공조 방식에 따른 열환경 평가 실험
조용,권혁승,김성현,김영일,Cho, Yong,Kwon, Hyurk-Seung,Kim, Sung-Hyun,Kim, Young-Il 대한설비공학회 2000 설비공학 논문집 Vol.12 No.9
Thermal comfort plays an important role in modern office buildings. Four major factors affecting thermal comfort are air temperature, velocity, humidity and radiation temperature. Distribution of these thermal factors in indoor space depends largely on the air flow which is related to the method of supplying and extracting air. In this study, an experimental analysis on indoor thermal comfort is conducted to study the difference between a ceiling supply cooling system and a floor supply one. The two cooling systems are applied to an office space during summer season and the distributions of temperature, velocity, radiation temperature and PMV are measured. Results show that the floor supply cooling system is superior in terms of thermal comfort and energy saving. Studies need to be done, however, to reduce the vertical temperature difference of a floor supply air conditioning system.
김가나 ( Ka Na Kim ),최지민 ( Min Ji Choi ),이영혁 ( Young Hyurk Lee ),조성훈 ( Seung Hun Cho ) 대한한방신경정신과학회 2013 동의신경정신과학회지 Vol.24 No.1
Objectives: During several thousand years, Peucedanum Japonicum Thunberg has been considered as a vegetable side dish in Korea. There is folk knowledge that Peucedanum Japonicum Thunberg prevents vascular disease such as stroke. To identify the effects Peucedanum Japonicum Thunberg, we made up its extract and named it as KH020. Then, we employed common carotid artery ligation (CCAl) surgery for vascular dementia model (VDM), and two types doses of per os (per oral: p.o) treatment. Methods: To confirm prevention and recovery effects for vascular dementia, we treated two doses (100, 400 mg/kg) KH020 in male C57BL/6 mouse during 7 days. After treatment, animals were CCAl operated, and given time to recover. Then, animal were tested in a Y-maze and passive avoidance test. Results: Y-maze results demonstrated that cognition and memory performance were decreased in the VDM group, compared to the sham group. KH020 treatment abolished these effects significantly. The results from the passive avoidance test showed the same phenomenon, but it was not statically significant. Conclusions: Therefore, KH020 prevents the onset of vascular dementia. In future studies, we will evaluate KH020 in regard to alzheimer dementia.
Fabrication of pseudo-crystal nanostructures of TiO2 particles under UV-irradiation.
Kim, Young-Kwan,Yun, Seong-Hun,Lee, Myoung-Jae,Shin, Yong-Hun,Kim, Kyung-Min,Kim, Sung-Ryong,Lee, Seung Woo,Lim, Jung-Hyurk American Scientific Publishers 2009 Journal of Nanoscience and Nanotechnology Vol.9 No.12
<P>Colloidal titanium dioxide (TiO2) suspensions were synthesized by hydrolysis of titanium isopropoxide in the presence of acetic acid. When TiO2 colloids were subjected to bandgap excitation (ultraviolet [UV] irradiation), the colloidal solution exhibited yellow coloration, leading to the trapping of holes and electrons on the particle surfaces. The absorption spectra indicated a distinct absorption band in the UV and visible region. Dried-drop film of the UV-irradiated TiO2 suspension on the mica surface was characterized by scanning electron microscopy (SEM). SEM images showed that 'crystal-like' network structures of TiO2 nanoparticles had formed dramatically on the solid surface. The resulting networks ranged in size from 100 nm to 500 nm and had crystal-growth patterns, while also having almost similar rectangular shapes. It seems that the individual particles, with electron or hole scavengers such as oxygen in ambient conditions, make contact with a number of neighbors, thereby forming self-assembled three-dimensional nanoparticle-based pseudo-crystalline structures.</P>