論陳維崧“詞史觀”視野下的詞藝開拓

黃偉(Huang Wei),彭靜(Peng Jing) 중국어문학연구회 2021 중국어문학논집 Vol.- No.129

In the development map of Chinese classical Ci-poetry, Ci-poetry in the Qing Dynasty occupies an important position. Chen Wei-song played an important role in promoting the development of Ci-poetry in the Qing Dynasty. First of all, Chen Wei-song broke through the concept of “The poem is solemn and Ci-poetry is charming”and “ to amuse the guests and relax one"s mind”and put forward the great idea of “choosing words is to preserve words, that is, to preserve history.”.He elevated the Ci-poetry which is considered as “Xiao Dao”and “Shi Yu” by traditional scholars to a literary position of equal importance with the classics and history. Chen Wei-song"s admiration of Ci-poetry greatly promoted the continuous movement of Ci-poetry in Qing Dynasty. Secondly, Chen Wei-song invoked the poetic viewpoint of “An injustice makes an outcry”and “Poverty makes progress”.On the basis of respecting the style of writing, Chen Wei-song further emphasized the use of words to express the difficulties of times. Thirdly, Chen Wei-song"s aesthetic orientation was based on his proposition that he was not partial to one school in terms of aesthetic style. Finally, Chen Wei-song"s boldness and harshness of Ci-poetry lead to the evolution of the style of Ci-poetry in the early Qing Dynasty. Chen Wei-song has opened up a new frontier in the pioneering of Ci-poetry.

Rigid Surface Matching by Shape Analysis and Correspondences Filtering

Peng Wei,Ji Weixi,Chen Wenliang,Shao Kun 한국정밀공학회 2018 International Journal of Precision Engineering and Vol.19 No.9

Surface matching technology, as a fundamental part of computer graphics, has a wide range of applications in engineering domain. In this paper, we propose a novel matching method for best fitting a given source model onto a target model by a combination of the following: point clustering, region similarity matching and correct pairing searching. Mesh segmentation is used to aggregate points into several sub-regions, and then paired regions are obtained by distance distribution. An indirect searching strategy is presented, in which bad paired triples are removed by filtering operation and the remaining candidates are traversed until the correct pairing is found. Experimental results on a variety of mechanical models demonstrate that our method exhibits high reliability and robustness for automatic shape alignment.

Adsorption Mechanism of Magnetic Induction Free- Abrasive Grain and Its Effect on Cutting Performance of Wire Saws

Wei Peng,Teng-wei Qiu,Chun-yan Yao,Chen Tang,Wei Zhang 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

This paper proposes a method of free-abrasive wire sawing in the magnetic field. Magnetic abrasive grains are absorbed on surface of the wire by magnetic force, and therefore more magnetic abrasive grains are carried into cutting area. This mechanism is helpful to improve the cutting performance of wire saws. Theoretical modeling of the movement trajectory of magnetic abrasive grains is done in the magnetic field, and it is also verified by observation experiments of movement trajectory of magnetic abrasive grains. Absorption angle, which is used as the indicator of adsorption capacity about magnetic abrasive grain on surface of the wire, is proposed in this paper. The effect of magnetic field intensity on absorption angle is analyzed through computer simulations and observation experiments. Practical experiments and cutting results show that the change of magnetic field intensity has a significant impact on cutting efficiency, surface roughness, and kerf width.

Control of Radial Force in Double Stator Type Bearingless Switched Reluctance Motor

Wei Peng,Zhenyao Xu,Dong-Hee Lee,Jin-Woo Ahn 대한전기학회 2013 Journal of Electrical Engineering & Technology Vol.8 No.4

Modeling and control of radial force in the double stator type bearingless switched reluctance motor (BLSRM) is researched. The rotational torque is controlled independently from the radial force control. And the radial force is constant which is independent from the rotor position. In order to realize steady suspension, analytical models of torque and radial force for the proposed structure are derived. Meanwhile, in order to realize steady suspension, control scheme for proposed BLSRM is proposed. In the control method, the radial force can be controlled in arbitrary direction and magnitude by selecting some combinations of radial force windings. The validities of structure and control method are verified by the experimental results.

Tube-in-tube airway management in a patient with Montgomery T-tube in situ -a case report-

Peng Ling,Wei Wei 대한마취통증의학회 2021 Korean Journal of Anesthesiology Vol.74 No.2

Background: Montgomery T-tube (MTT) is a useful airway device but is seldom used. Owing to its specific shape and structure, it is challenging for anesthesiologists to manage airway in patients with MTT in situ who require general anesthesia and continuous positive-pressure ventilation (CPPV). Case: A 48-year-old 74-kg man with an MTT in situ was scheduled for local pancreatic resection under general anesthesia. We transorally inserted a cuffed endotracheal tube into the intratracheal limb of the MTT to achieve CPPV and to deliver the inhalation anesthetic. The endotracheal tube was removed successfully after the patient fully recovered from anesthesia. No tracheal injury or hemorrhage occurred after intubation or extubation, and the location of the MTT remained unchanged.Conclusions: Transoral insertion of a cuffed endotracheal tube into the intratracheal limb of the MTT could therefore be considered as a safe and feasible approach for airway management.

A rub fault recognition method based on generative adversarial nets

Wei Wang,Weidong Liu,Jing Li,Wei Peng 대한기계학회 2020 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.34 No.4

Faced with the problem of valid data shortage data in practical. There's not enough data to train classifiers which can be satisfied to detect impact-rubbing faults in rotary machine. Bedsides, the large number of noises in working enviroment make the useful signal contaminated. Based on this problem, this paper proposes a rubbing fault recognition method based on a generative adversarial nets named deep convolution generative adversarial nets (DCGAN), which is based on a deep convolutional network frame with generation and discrimination models. The acquired signal is processed by time frequency analysis further to get spectrogram. The DCGAN can perform feature conversion and map it to the potential feature subspace to obtain more robust features. The results illustrate that the proposed method can achieve a much more excellent recognition effect. Thus, the proposed DCGAN model is an effective way to recognize impact-rubbing fault in the practical.

Attention and Working Memory Task- Load Dependent Activation Increase with Deactivation Decrease after Caffeine Ingestion

Wei Peng,Jian Zhang,Da Chang,Zhuo-Wen Shen,Yuanqi Shang,Donghui Song,Qiu Ge,Xuchu Weng,Ze Wang 대한자기공명의과학회 2017 Investigative Magnetic Resonance Imaging Vol.21 No.4

Purpose: Caffeine is the most widely consumed psychostimulant. It is often adopted as a tool to modulate brain activations in fMRI studies. However, its pharmaceutical effect on task-induced deactivation has not been fully examined in fMRI. Therefore, the purpose of this study was to examine the effect of caffeine on both activation and deactivation under sustained attention. Materials and Methods: Task fMRI was acquired from 26 caffeine naive healthy volunteers before and after taking caffeine pill (200 mg). Results: Statistical analysis showed an increase in cognition-load dependent task activation but a decrease in load dependent de-activation after caffeine ingestion. Increase of attention and memory task activation and its load-dependence suggest a beneficial effect of caffeine on the brain even though it has no overt behavior improvement. The reduction of deactivation by caffeine and its load-dependence indicate reduced facilitation from task-negative networks. Conclusion: Caffeine affects brain activity in a load-dependent manner accompanied by a disassociation between task-positive network and task-negative network.

Assessing the Vulnerability of Network Topologies under Large-Scale Regional Failures

Wei Peng,Zimu Li,Yujing Liu,Jinshu Su 한국통신학회 2012 Journal of communications and networks Vol.14 No.4

Natural disasters often lead to regional failures that can cause network nodes and links co-located in a large geographical area to fail. Novel approaches are required to assess the network vulnerability under such regional failures. In this paper, we investigate the vulnerability of networks by considering the geometric properties of regional failures and network nodes. To evaluate the criticality of node locations and determine the critical areas in a network, we propose the concept of α-critical-distance with a given failure impact ratio α, and we formulate two optimization problems based on the concept. By analyzing the geometric properties of the problems, we show that although finding critical nodes or links in a pure graph is a NP-complete problem, the problem of finding critical areas has polynomial time complexity. We propose two algorithms to deal with these problems and analyze their time complexities. Using real city-level Internet topology data, we conducted experiments to compute the α-critical-distances for different networks. The computational results demonstrate the differences in vulnerability of different networks. The results also indicate that the critical area of a network can be estimated by limiting failure centers on the locations of network nodes. Additionally, we find that with the same impact ratio α, the topologies examined have larger α-critical-distances when the network performance is measured using the giant component size instead of the other two metrics. Similar results are obtained when the network performance is measured using the average two terminal reliability and the network efficiency, although computation of the former entails less time complexity than that of the latter.

Vibration analysis and dynamic performance improvement of high-frequency injection method

Peng, Wei,Qiao, Mingzhong,Jiang, Chao,Lu, Xihao,Zhu, Peng The Korean Institute of Power Electronics 2021 JOURNAL OF POWER ELECTRONICS Vol.21 No.2

This paper analyzes and compares the typical rotating high-frequency voltage injection (RTHF) method and the typical pulsating high-frequency voltage injection (PSHF) method in terms of torque ripple and vibration. Analysis and experiment results indicate that the PSHF performs better when it comes to torque pulsation and vibration. In addition, it is more suitable for rim motors which have strict restrictions on vibration. However, the estimated rotor position in PSHF has multiple convergence points. In addition, the filters used in PSHF can degrade the dynamic response of the PMSM sensorless field oriented control (SLFOC) system. An improved PSHF method compensated by Hall signals is proposed to accelerate the estimation process and improve the system stability in the presence of sudden load disturbances. The improved method is verified on an 11 kW rim motor experimental platform.

Control of Radial Force in Double Stator Type Bearingless Switched Reluctance Motor

Peng, Wei,Xu, Zhenyao,Lee, Dong-Hee,Ahn, Jin-Woo The Korean Institute of Electrical Engineers 2013 Journal of Electrical Engineering & Technology Vol.8 No.4

Modeling and control of radial force in the double stator type bearingless switched reluctance motor (BLSRM) is researched. The rotational torque is controlled independently from the radial force control. And the radial force is constant which is independent from the rotor position. In order to realize steady suspension, analytical models of torque and radial force for the proposed structure are derived. Meanwhile, in order to realize steady suspension, control scheme for proposed BLSRM is proposed. In the control method, the radial force can be controlled in arbitrary direction and magnitude by selecting some combinations of radial force windings. The validities of structure and control method are verified by the experimental results.