http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오소형,유동근,정성기,정지홍,박권필,Sohyeong Oh,Donggeun Yoo,Sunggi Jung,Jihong Jeong,Kwonpil Park 한국화학공학회 2023 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.61 No.3
Recently, research and development of proton exchange membrane fuel cells (PEMFC) membranes are progressing in the direction of thinning to reduce prices and improve performance. Demand for hydrogen-powered vehicles for commercial vehicles is also increasing, and their durability should be five times greater than those for passenger vehicles. Despite the thinning of the membranes, the durability of the membranes must be increased five times, so the improvement of the durability of the membranes has become more important. Since the acceleration durability evaluation time also needs to be shortened, the protocol using oxygen instead of air in the existing protocol was applied to a 10 ㎛ thin membrane to evaluate durability. The accelerated durability test (Open circuit voltage holding) was terminated at 720 hours. If the air-based department of energy (DOE) protocol was used, a lifespan of 450,000 km of driving hours would be expected, with a durability of about 1,500 hours. During the chemical durability evaluation, the active area of the electrode decreased by 51%, suggesting that catalyst degradation had an effect on membrane durability. Reducing the catalyst degradation rate is expected to increase membrane durability.
최종기(Jongkee Choi),정지홍(Jihong Jung),임지훈(Jihoon Lim),마삼선(Samsun Ma),박기준(Kijun Park) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
비상발전기는 고객이 비상시를 대비하여 자체적으로 설치하는 자가발전기로서 그 이용율이 매우 낮다. 전력피크시 비상발전기로 자체부하의 일부 또는 전부를 분담하게 되면 그만큼 계통의 전력수요가 줄어들어 계통신뢰도는 증가하게 된다. 이처럼 유휴 비상발전기 자원을 수요관리에 활용하려는 시도는 오래 전부터 있어 왔으나 발전기 보유고객의 가동기피 등 여러 가지 원인 때문에 그 활용이 제한적이었다. 본 논문에서는 국내 비상발전기 설비 및 운영실태조사를 통해 기피요인과 대책방안을 검토함으로써 수요관리활용 확대방안을 도출하고자 하였다.
김홍준(Hongjoon Kim),정지홍(Jihong Jung),하욥(Job Ha),장경영(Kyungyoung Jhang) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
Arc-shaped line array slits have been used for the laser generation of focused Lamb waves. The spatially<br/> expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a<br/> sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were<br/> focused at the point of which distance from the slit position is dependent on the curvature of slit arc. The<br/> proposed method showed better spatial resolution than the conventional linear array slit in the detection of<br/> laser machined linear defect and drill machined circular defect on aluminum plates of 1mm thickness.
사용자 행태 분석을 통한 홈 네트워크 인터페이스 모델링
서윤숙(Yunsuk Seo),김예진(Yaejin Kim),정지홍(Jihong Jung),김영철(Youngchul Kim) 한국정보과학회 2005 한국정보과학회 학술발표논문집 Vol.32 No.2
최근 사용자 행태 분석 개념이 매우 중요한 이슈가 되고 있으며, HCI(Human-Computer Interface)의 관점에서 사용자의 행태와 시스템 모델링은 적절한 모델링 언어나 도구가 부족하여 사용자의 행태를 전부 표현하지 못한다. 소프트웨어공학에서는 시스템을 설계하기 위해 UML(Unified Modeling Language)을 사용하여 시스템을 모델링하고 있다. 물론 UML에 액터 개념은 있으나 시스템 중심의 모델에 초점을 두고 있어, 사용자의 행태 표현에 제약이 존재한다. 이에 본 논문에서는 사용자 행태를 모델링하기위해 OBA(Object Behavior Analysis)방법론을 기반으로 사용자 행태에 초점을 맞춰 시스템을 모델링 하고, 결과로써 HCI관점을 위해 부족한 UML의 문제와 확장성을 언급하고자 한다.
화학적/기계적 열화 병행방법에 의한 PEMFC 고분자막 내구성 평가
임대현 ( Daehyeon Lim ),오소형 ( Sohyeong Oh ),정성기 ( Sunggi Jung ),정지홍 ( Jihong Jeong ),박권필 ( Kwonpil Park ) 한국화학공학회 2021 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.59 No.3
고분자 전해질 연료전지(Proton Exchange Membrane Fuel Cell, PEMFC) 내구성 향상을 위해서 고분자막의 내구성을 짧은 시간에 정확히 평가하는 것은 중요하다. 최근에 미국 에너지부(Department of Energy, DOE)에서 고분자막의 화학적 내구성과 기계적 내구성을 결합해 평가하는 프로토콜을 보고하였다. 이 프로토콜은 개회로전압(Open Circuit Voltage, OCV) 유지 상태에서 가습/건조를 반복함으로써 화학적/기계적 열화를 고분자막에 가한다. OCV 변화 반복에 따른 전극 열화의 영향을 많이 받고 평가시간이 장시간인 점들이 이 프로토콜의 문제점이다. 본 연구에서 DOE 프로토콜의 다른 조건들은 그대로 두고 양극(Cathode) 가스로 공기 대신 산소를 사용함으로써 내구평가 시간을 408시간에서 144시간으로 단축시킬 수 있었다. 전압변화 사이클 횟수를 1/3로 감소시킴으로써 전압변화 사이클에 의한 전극열화는 종료 시점에서 공기에 비해 산소 사용 시 1/12로 감소시켜서, 고분자막 내구 평가를 보다 정확히 할 수 있게 하였다. In order to improve the PEMFC (Proton Exchange Membrane Fuel Cell) durability, it is important to accurately evaluate the durability of the membrane in a short time. Recently, DOE (Department of Energy) reported a protocol that combines the chemical and mechanical durability of membranes to evaluate them effectively. This protocol applies chemical/mechanical deterioration to the membrane by repeating wet/dry while OCV (Open Circuit Voltage) holding. The problem of this protocol is that it is highly affected by electrode degradation due to change cycles in OCV and that the evaluation time is long. By using oxygen instead of air as the cathode gas while leaving the other conditions of the DOE protocol as it is, the durability evaluation time could be reduced from 408 hours to 144 hours. By reducing the number of voltage change cycles to 1/3, the electrode degradation due to the voltage change cycle was reduced to 1/12 when oxygen was used compared to air at the end, thereby enabling more accurate evaluation of polymer membrane durability.