http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
모래무지(Pseudogobio esocinus)의 난발생 및 자치어 형태발달
이성훈,오광남,김관석,오용석,강경완,황재호,이배익,이원교,한경호,Lee, Sung-Hun,Oh, Gwang-Nam,Kim, Kwan-Seok,Oh, Yong-Seok,Kang, Kyeong-Wan,Hwang, Jae-Ho,Lee, Bae-ik,Lee, Won-Kyo,Han, Kyeong-Ho 한국발생생물학회 2008 발생과 생식 Vol.12 No.3
이 연구는 2003년 4월부터 5월까지 전라남도 보성군 겸백면 율어리 소재의 보성강 중류에서 투망과 족대를 이용하여 채집된 모래무지 어미들을 전남대학교 해양기술학부 자원생물실험실로 운반하여 실내 사육하면서 난발생 및 자치어 형태발달을 관찰하였다. 모래무지의 수정란은 구형의 침성부착란으로 난경은 $1.98{\pm}0.19mm$(n=50)였고, 반투명하였다. 부화에 소요되는 시간은 수정 후 164시간부터였고, 이 때 근절수가 31$\sim$32개였으며, 배체의 움직임이 활발하였으며, 머리부터 난막을 뚫고 부화하기 시작하였다. 부화 직후의 자어는 전장이 $4.61{\pm}0.83mm$(n=10)로 난황은 아직 흡수하지 않은 상태였으며, 입과 항문은 열려 있지 않았다. 등쪽과 배쪽, 꼬리쪽에 별모양과 점모양의 흑색소포가 산재하였으며, 눈에는 색소포가 진하게 착색되어 있었다. 부화 후 42일째는 전장 $16.22{\pm}0.65mm$(n=10)로 흑색소포가 두부와 등쪽과 체측면에 따라 짙게 산재하였고, 주둥이 양쪽에 수염이 나타났으며, 체형이나 반문이 성어와 완전히 닮아 있어 치어기로 이행하였다.
호알칼리성, 고온성 Bacillus cereus TA-11으로 생산된 세포내 Invertase의 생합성 조절
이성훈,송정은,이종수,Yi, Sung-Hun,Song, Jung-Eun,Lee, Jong-Soo Research Institute of Natural Sciences 2007 自然科學論文集 Vol.18 No.1
호 알칼리성이며 고온성인 Bacillus cereus TA-11이 세포내로 생성하는 invertase의 생합성 조절 양상을 조사하였다. Bacillus cereus TA-11의 세포내 invertase는 10 mM sucrose의 180분 처리와 25 mM raffinose의 90분 처리에서 각각 효율적으로 유도되었다. 또한 glucose는 sucrose에 의한 invertase의 유도를 억제하였고 cAMP첨가는 catabolite repression을 감소시키지 못하였다. Regulation of invertase biosynthesis was studied with alkalophilic and thermophilic Bacillus cereus TA-11. Biosynthesis of invertase in Bacillus cereus TA-11 was effectively induced in the presence of 10 mM of sucrose for 180 min and 25 mM of raffinose for 90 min, respectively. Glucose repressed the invertase induction by sucrose and as late addition time of glucose, invertase formation was increased, indicating that glucose repression was occurred by inducer exclusion. Catabolite repression was not reduced by the addition of cAMP for 180 min of induction.
이성훈,이창교,박재홍,조수현,최승호,김태형,Lee, Sung-hun,Lee, Chang-Kyo,Park, Jae-Hong,Cho, Soo-Hyun,Choi, Seung-Ho,Kim, Tae-Hyung The Korea Institute of Information and Commucation 2020 한국정보통신학회논문지 Vol.24 No.9
In this study, we designed a single antenna taking into account the performance, such as return loss and radiation pattern, of 28 GHz and 38 GHz array antennas for 5G mobile devices. In millimeter wave band communication, high path loss occurs between transmission and reception, unlike in conventional microwave bands. In the design of array antennas for 5G millimeter wave terminals, antenna performance such as antenna gain, bandwidth, isolation between antenna elements, side-lobe level(SLL), etc. should be further considered. The performance of the designed array antennas was analyzed by spacing the antenna elements at half a wavelength. Our results proved the validity of the design and its suitability for applications in mm-Wave by showing that the 28 GHz and 39 GHz array antennas had antenna gains of 13.5 dBi and 11.3 dBi and return losses below -18.4 dB and -20 dB, correspondingly. 본 논문에서는 28 GHz와 38 GHz의5G 단말용 안테나 타입별 반사손실, 방사패턴 등의 성능을 고려하여 단일안테나를 설계하고, 안테나 소자를 반 파장 간격으로 배열하여 5G 단말용 배열안테나를 설계하였고 성능을 분석하였다. 밀리미터파 대역 통신에서는 기존의 마이크로파 대역에서와는 달리 송수신 간의 높은 경로손실이 발생한다. 5G 밀리미터파 단말용 배열안테나 설계에서는 안테나의 이득, 대역폭뿐만 아니라, 안테나 소자 간 격리도, side-lobe level(SLL) 등의 안테나 성능이 추가적으로 고려되어야 한다. 28GHz와 39GHz에서 제안하는 안테나 이득이 각각 약 13.5dBi 와 11.3dBi, 반사손실도 -18.4 dB과 -20 dB 이하의 측정 결과로부터 설계의 타당함을 입증하였고, 밀리미터파 대역 응용으로서도 적합함을 보였다.
Center-Body Diffuser의 CB 위치와 CB cone 각도에 따른 Diffuser의 유동특성 및 Diffuser 시동 압력에 대한 수치적 연구
이성훈(Sung Hun Lee),박진(Jin Park),김홍집(Hong Jip Kim) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.5
CBD의 CB 형상에 의한 디퓨저 유동 특성 및 시동압력을 해석하였다. CB와 노즐 출구 사이의 거리와 CB cone 각도를 변수로 설정하여, CBD 내부의 초음속 유동 특성 및 디퓨저의 시동압력을 비교하였다. CB 위치를 변수로 하여 Diffuser 해석한 결과, 유동의 모멘텀의 형성에 따라 강한 경사충격파의 발생위치가 달라지는 것을 확인하였다. 또한 강한 경사충격파가 발생할 경우, 초음속 유동의 방향이 디퓨저 벽면으로 유도되는 것을 확인하였다. CB cone 각도를 변수로 Diffuser 해석한 결과, CB cone 각도가 상승할 경우, 강한 경사 충격파 각도가 상승되며 경사충격파의 각도에 따라 재순환 영역의 발달이 영향을 받는 것을 확인하였다. In this study, flow characteristics and starting pressure of CBD were analyzed According to CB position and CB cone angle. Each cases of CB geometry were set and analyzed results were compared. According to CB position, occurred location of oblique shock moved to front from behind of CB cone with increasing of flow momentum. Also, when strong oblique shock was occurred, direction of supersonic flow was influent and induced to diffuser wall. When angle of CB cone was set as variable parameter, angle of the oblique shock was increased and direction of supersonic flow was more induced to diffuser wall with increasing of CB cone angle.
이성훈(Sung-Hun Lee),최재석(Jae-Seok Choi),차준민(Jun-Min Cha),김남명(Daniel Kim) 대한전기학회 2014 전기학회논문지 Vol.63 No.7
The pumped storage power plants have excellent load following characteristics. It can also be committed quickly for synchronous reserve when it is in the generating mode because it can readily increase its generating power and, consequently, increases the overall system reliability. There are strong incentives for standing the system reliability. Additionally, CO₂ emission can be typically impacted due to operation of pumped generators. The increase or decrease of CO₂ depends on the generation mix. This paper proposes evaluation of reliability, economy and environment of power system considering pumped generator. This paper describes three case studies of the reliability and economy and environment according to capacity factor and storage capacity of pumped generators. The probabilistic production simulation model is used in this paper. The practicality and effectiveness of the proposed approach are demonstrated by simulation studies for a real size power system model on the 5<SUP>th</SUP> power plan in Korea.