http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
용접구조용 고장력강의 용접부 인성에 미치는 미세 조직과 용접 입열량의 영향
장웅성,방국수,엄기원 대한용접접합학회 1989 대한용접·접합학회지 Vol.7 No.3
This study was undertaken to evaluate the allowable welding heat input range for high strength steels manufactured by various processes and to compare the weldability of TMCP steel for high heat input welding with that of conventional Ti-added normalized steel. The allowable welding heat input ranges for conventional 50kg/$mm^2$ steel to guarantee D or E grade of ship structural steel were below 150 and 80kJ/cm respectively. Such a limit in welding heat input was closely related with the formation of undesirable microstructures, such as grain boundary ferrite and ferrite side plate in the coarse grain HAZ. In case of 60 and 80kg/$mm^2$ quenched and tempered steels, for securing toughness in weldments over toughness requirements for base metal, each welding heat input had to be restricted below 60 and 40kJ/cm, that was mainly due to coarsened polygonal ferrite in weld metal and lower temperature transformation products in coarse grain HAZ. The TMCP steel could be appropriate as a grade E ship hull steel up to 200kJ/cm, but the Ti-added normalized steel could be applied only below 130kJ/cm under the same rule. This difference was partly owing to whether uniform and fine intragranular ferrite microstructure was well developed in HAZ or not.
선급용 고장력강 FSW접합부의 미세조직 및 기계적 성질
장웅성,최기용 대한용접접합학회 2002 대한용접·접합학회지 Vol.20 No.3
In an attempt to evaluate the feasibility of friction stir welding(FSW) for joining carbon steels, microstructures and mechanical properties of friction stir welded carbon steels with different grain structures were investigated. In comparison of O-type stir zone(SZ) appeared in various aluminium alloys, configuration of SZ in friction stir welded carbon steels displayed U-type. Plastically deformed pearlite band structure was identified to surround the SZ, indicating the existence of so-called thermo-mechanically affected zone(TMAZ). However, the TMAZ of carbon steels was much narrower than that of Al alloys. The microstructures of both stir zone and TMAZ revealed bainite matrix in a conventional carbon steel for shipbuilding, while, in the same region, ferrite matrix microstructures were formed in a low carbon fine grained steel. The conventional carbon steel showed superior stirring workability to that of the fine grained carbon steel. The yield and tensile strength of the friction stir welded joints were comparable to those of the base metals, and the elongation in welded joints demonstrated excellent ductility. Absorbed energy in SZ of the fine grained carbon steel was ten times higher than that obtained from conventional submerged arc weld metal of the same steel. Based on these results, the application FSW to carbon steels was found to be feasible.
구연 / 제 1 회의장 / 위장관 5 : Helicobacter pylori 감염의 위험요인에 대한 환자 - 대조군 연구
장웅기(Woong Ki Chang),김동준(Dong Jun Kim),김학양(Hak Yang Kim),김종혁(Jong Hyuk Kim),박충기(Choong Kee Park),유재영(Jae Young Yoo),김미경(Mi Kyung Kim),최보율(Bo Youl Choi),최호순(Ho Soon Choi),박경남(Kyung Nam Park),김현자(Hyun Ja 대한소화기학회 1999 대한소화기학회 추계학술대회 Vol.1999 No.-
장웅범 한국재난정보학회 2020 한국재난정보학회 학술대회 Vol.2020 No.11
화재가 발생할 때 연기로부터 안전하게 피난과 소방관의 소화활동을 위해 제연설비가 설치되어 있다. 기존의 자동차압·과압 조절형 급기댐퍼는 화재층과 비화재층을 구분하지 못하므로 화재가 발생하지 않는 층에서 피난을 할 경우 화재층이 연기로부 터 보호받지 못한다. 스마트 댐퍼를 적용하면 화재층과 비화재층을 구분하므로 화재층을 연기로부터 보호가 가능하다. 스마트 댐퍼를 응용하면 평상시에 환기용도로도 적용이 가능하다. 스마트 댐퍼를 적용하여 제연성능을 개선 가능함을 확인하였다.
장웅성,김기철,김영천,김상록,김우식 대한용접접합학회 1998 대한용접·접합학회지 Vol.16 No.1
본 해설에서는 Inconel계와 Hastelloy계로 구분되는 9%Ni강용 피복아크용접봉을 중심으로 LNG저장탱크 용접시공시 발생 가능한 문제점들을 검토하고, Ni합금 피복봉의 심선과 피복제와 관련한 일반적인 제조특성을 살펴보았다. 또한 현재 국내 현장에서 용접시공에 사용되는 용접재료의 화학적, 기계적 특성과 함께 용접작업성을 평가한 결과 이들 피복아크용접봉들은 규격이 정한 요구조건들을 만족하면서 비교적 양호한 용접작업성을 확보하고 있는 것으롤 판단되었다. 이상의 검토결과는 향후 9%Ni강용 Ni합금 피복아크용접봉의 국산화 개발에 기초자료로 활용될 것으로 기대된다.