http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초임계 유체를 이용한 광촉매용 나노크기의 결정질 $TiO_2$ 분말 제조
임대영,김종옥,김택남,이채현,박원규,Lim, Dae-Young,Kim, Jong-Ock,Kim, Taik-Nam,Lee, Chae-Hyun,Park, Won-Kyu 배재대학교 공학연구소 1998 공학논문집 Vol.3 No.1
습식화학법의 단점을 극복하는 이상적인 분말을 제조하기 위해서는 용질분자가 용액내에서 활발하게 움직여서 분자단위의 혼합이 가능하고 용매는 낮은 점도를 가져 용질분자의 움직임에 도움을 주어야 하며, 얻어진 분말도 결정질이어야 한다. 본 논문에서는 이러한 조건을 동시에 만족시키는 분말제조방법으로 물질의 임계온도, 임계압력을 넘어 응축된 가스상태로 존재하는 초임계 유체를 이용하여 분말을 제조하였다. 용매인 에탄올이 초임계 유체상태에서 분해될 때 생성된 물로 titanium(IV) ethoxide를 가수분해시켜 이용도가 높은 광촉매용 $TiO_2$ 분말을 제조하였다. In order to fabricate ideal powders, new processing is necessary in which the solute atoms in solution rapidly move to mix each other to the degree of molecular level, the viscosity of solution should be low not to effect the moving of solute atoms, and the powders could be directly obtained as crystalline. Supercritical fluid is defined as condensed gas state up to its critical pressure and temperature. In this paper, supercritical fluid methods were studied as a new ceramic processing of powder preparation. The crystalline anatase powders of $TiO_2$ which are useful for photocatalyst materials were fabricated by hydrolysis of titanium(IV) ethoxide using water which was ethanol as a supercritical fluid.
임대영,최은경 한국생체재료학회 2008 생체재료학회지 Vol.12 No.2
The major materials and components in some medical devices are found to be nonwoven, woven or knitted textiles made of staple or filament yarns. According to domestic textile industry's demand to explore a new value-added area, a mid-term project to develop medical devices based on 3-dimensional textile structures has been funded by Ministry of knowledge economy. Target medical products are surgical meshes for urinary incontinence, vascular grafts, leucofilters, wound dressings as well as various polyester nonwovens suitable for the application of medical devices. Especially the last one focuses on the use of ordinary polyesters in the first stage and development of medical grade Sbfree polyesters, antibiotic and drug-delivery fibers. The project features with a cooperation among biomedical experts, medical doctors and textile experts to industrialize target products that are now highly dependent on import.
임대영,Im, Dae-Yeong 배재대학교 자연과학연구소 1992 自然科學論文集 Vol.5 No.2
$Si_3$$N_4$$-5^w$/$oA1_2$$O_3$$-5^w$/$oY_2$$O_3$ 분말의 분산이 소성후 미세구조에 미치는 영향을 조사하였다. 분산은 pH를 변화시켜 가면서 행하였고, 분산상태를 직접 전자 현미경으로 관찰 하였다. 각시편을 $1750^{\circ}C$에서 1시간 소성하여 치밀도를 조사하였으며 그결과 pH5, pH10에서 분산시킨 분말이 가장 치밀하게 소결되었다. The objective of this study is to investigate the effect of dispersion of silicon nitride powder with 5wt% $A1_2$$O_3$ and 5wt% $Y_2$$O_3$ on the microstructure of a sintered body. $Si_3$$N_4$ powder was dispered in a distilled water with varing pH.Zeta potential was measured and the dispersion states were directly observed by SEM. Green bodies were obtained by slip-casting and fired at $1750^{\circ}C$ for 1 hr. Microstructures of fired specimens were observed by SEM. The result were that the specimen prepared from the dispersions with pH 5 and 10 showed the best densification.
초임계 유체법을 이용한 Pb(Fe<sub>1/2</sub>Nb<sub>1/2</sub>)O<sub>3</sub>분말 제조
임대영,김병규,최근목,홍석형,김태훈 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.6
In general, Pb-based complex perovskite powders have not been directly prepared because pyrochlore that is secondary phase appears. In this study, we tried to prepare Pb(Fe$_{1}$2/Nb$_{1}$2/)O$_3$ which was used to the electronic multicomponent by supercitical fluid method in order to fabricate very active powder not through pyrochlore. 일반적으로 Pb-계 복합 perovskite형 산화물들은 그 제조과정에서 중간상으로 알려진 pyrochore상을 통하여 최종적으로 합성된다. 본 연구에서는 Pb(Fe$_{1}$2/Nb$_{1}$2/)O$_3$를 대상으로 하여 고유전율, 고순도, 입자크기 및 저온 소결에 알맞은 Pb(Fe$_{1}$2/Nb$_{1}$2/)O$_3$분말을 초임계 유체의 장점과 autoclave내의 분리 반응 실험으로 285$^{\circ}C$,7.2MPa의 조건하에서 제조하였고, 제조되어진 분말들의 제반 특성들에 대하여 조사하였다.