http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
삼각 분리 막대형 차압유량계 압력탭 조건이 유량 측정에 미치는 영향
이충훈 한국안전학회 2010 한국안전학회지 Vol.25 No.2
Flow characteristics of differential pressure flow meters which have a shape of triangular separate bar (TSB) was investigated according to the machining conditions in pressure tapping holes. Diameter of the pressure taping holes is either 1.0 mm or 1.5 mm. Also, number of the pressure tapping holes are drilled either 9 or 17. The mass flow rate of the TSB flow meters are calibrated with a laminar flow meter by connecting them in line. The mass flow rate in the TSB flow meters are plotted with a non-dimensional parameter H which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters. An empirical correlation between the mass flow rate at the TSB flow meter and the non-dimensional parameter H was obtained. The empirical correlation showed highly linear relationship between the mass flow rate and the non-dimensional parameter H. The hole size of the pressure tapping holes has a bigger effect on the flow rate than the number of the tapping holes
Size Taping 기법을 이용한 구급차의 내부 공간 설계
한용택(Yong Taek Han),김민학(Min Hak Kim) 한국화재소방학회 2022 한국화재소방학회 학술대회 논문집 Vol.2022 No.추계
국내 구급차는 「도로교통법 제2조 제20호」에 긴급자동차로 분류되며 「응급의료에 관한 시행규칙 제38조제1항」에서는 일반구급차와 특수구급차로 구분이 된다. 일반 구급차는 위급의 정도가 중하지 아니한 응급환자의 이송에 주로 사용되며 기본적인 의료장비 및 구급의약품을 갖춘 구급차를 말하며, 특수구급차는 위급의 정도가 중한 응급환자의 이송에 적합하도록 의료장비, 구급의약품, 의료인 및 의료기관과 통화 할 수 있는 통신장비를 갖춘 구급차를 말한다. 그리고 「구급차의 기준 및 응급환자 이송업의 시설 등 기준에 관한 규칙 제 2조, 제1항」 구급차의 형태에서 구급자동차(이하 “구급차”라 한다.)는 자동차관리법 제3조의규정에 의한 승합자동차 또는 화물자동차로서 지붕구조의 덮개가 있어야 한다고 되어 있다. 「자동차관리법 제3조」자동차의 종류에서 자동차는 자동차의 크기⋅구조, 원동기의 종류, 총배기량 또는 정격출력 등 국토해양부령으로 정하는 구분기준에 따라 승용자동차, 승합자동차, 화물자동차, 특수자동차 및 이륜자동차로 구분한다. 국내의 일반구급차의 경우 대부분 EMS의 민간구급차의 형태로 제조 및 사설병원과 연계되어 운용이 되고 있는 것이 대부분이며, 특수구급차는 전고가 높은 형태의 일부 EMS의 민간구급차와 관용의 119소방대의 구급차의 형태로 크게 운용이 되고 있다. 또한, 차종의 형태는 현재까지 대부분 H사의 스타렉스의 차대를 이용하여 운용되고 있으며, 차대의 기술 개발로 인하여 신형의 차체인 H사의 스타리아의 형태를 이용한 구급차가 개발이 되고 있으며, 이와같은 신형의 차체를 이용한 구급차의 연구이며, 제한된 실내를 최대한 효율적으로 활용하기 위한 공간의 디자인을 위한 size taping 기법을 활용하여 환자, 보호자 및 처치자의 공간 활용을 효율적으로 설계하기 위한 size taping 기법에 관한 연구이다. 이와같은 기법을 이용하여 다양한 공간분석을 통하여 국내의 구급차의 개발에 이바지하는 것을 본 연구에서는 목표로 하고 있으며, 기본적이지만 매우 큰 효과를 내부공간 설계에 활용한 것을 확인할 수 있다.
Continuous synthesis of nickel/cobalt/manganese hydroxide microparticles in Taylor–Couette reactors
임장균,윤성호,홍종팔,최재붕,김기문,Tae-Rin Lee 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.99 No.-
Taylor–Couetteflow based reactors have been used to prepare nickel/cobalt/manganese hydroxideparticles. The experiments performed in small volume reactors at the laboratory level have yieldedsatisfactory results. However, to commercialize Taylor–Couette reactors, parametric studies consideringvarious operating conditions must be conducted. In this work, the synthesis of nickel/cobalt/manganesehydroxides was examined in two reactors with different size and operating conditions. Specifically, theeffects of the RPM and pH were investigated by measuring the mean diameter and tap density after thesaturation of the particle growth in the given reactors. The results were used to define the design criteriato determine the mean diameter and tap density by comparing the experimental results with the resultsreported in the literature. Furthermore, the correlation between the shear rate and particle size wasanalyzed to predict the particle growth in scale-up reactors based on Parker's theory.
분산계 특성이 질화규소 미분의 과립특성 및 충진거동에 미치는 영향
이해원,오성록 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.4
The characteristics of spray-dried granules are important for dry pressing operation since they have great influences on die-filling, compaction ratio, and resulting green microstructure. An attempt was made to control granule morphology and the packing structure of fine Si3N4 particles in granules by adjusting suspension property. Mercury porosimetry was used to characterize the pore structures of both granules and green compacts. Finally, the effects of particle packing structure in granules and green microstructure on sintering behavior were investigated.
Andrey G. Troshin,Cha SangGon,Kim DongHwan 제어로봇시스템학회 2011 제어로봇시스템학회 국제학술대회 논문집 Vol.2011 No.10
Research results for LMS-based algorithms performances using real records of the traffic noise are discussed. The various algorithms based on LMS method are studied regarding their convergence speed and noise reduction index. Most effective algorithms are chosen for implementation in the active noise control barriers. The optimal step size, and number of adaptive filter taps are addressed during parametric study of the algorithms.