http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Austenite Grain Growth Behavior of 30BF Steel Before Rough Rolling
Yong‑feng Chen,Jian‑bo Xie,Yan‑xin Wu,Jian‑xun Fu 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.4
To investigate the eff ect of heat treatment on the grain size of austenite in 30BF steel, the comparisons of the morphologiesand sizes of austenite grains between heating samples were made with a high-temperature electric resistance furnace, andthe austenite growth models were built with method of mathematics. The results show that most grains in original specimenwith the sizes below 70 μm uniformly distributed. At a heating rate ( v ) of 10 °C/s, the grain size ( d ) value under a certain time( t ) increased by 60–100 μm with raising temperature ( T ) from 850 to 1100 °C, whereas the d value under a certain T merelyincreased by 70–120 μm with raising time to 60 min. Under v = 0.1 °C/s, T = 850 °C, and t = 0 s, the occupied ratio of grainswith sizes of 40–50 μm was 0.165, whereas at 900 °C, the occupied ratio was 0.125. The evolutions of ln (d5.8− d5.80 ) with1/ T were in negative linear correlations, whereas the ln (d5.8− d5.80 ) with ln t were in positive linear correlations. To sum up,the grain growth behavior of steel was elucidated.
Yong Yan,Shasha Li,Yufeng Ou,Yaxin Ji,Zhou Yu,Lian Liu,Chuanpeng Yan,Yong Zhang,Yong Zhao 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.6
Crystalline In2Se3 films were fabricated by magnetron sputtering from a sintered In2Se3-compound target and the effects of the deposition parameters, including the working pressure and deposition time, on the phase composition, structure, morphology, and optical properties were clarified. Single-phase κ-In2Se3 was prepared at 4.0 Pa, but γ-In2Se3 was recognized when the working pressure was lower than 4.0 Pa. The optical transmittance of the films decreased to 45% and the optical band gap varied from 2.9 to 2.0 eV with increasing film thickness from 80 to 967 nm. Metal-semiconductor-metal (MSM) photodetectors based on γ-In2Se3 thin films with various thicknesses were also fabricated. The result of photosensitivity research on such MSM photodetectors suggests that it may be impossible to fabricate wide-absorption-range MSM devices by just using a single material (γ-In2Se3) because of spatial potential fluctuations in the layers.
Yong Yan,Fan Jiang,Lian Liu,Zhou Yu,Yong Zhang,Yong Zhao 대한금속·재료학회 2016 ELECTRONIC MATERIALS LETTERS Vol.12 No.1
A growth method is presented to control the preferred orientation inchalcopyrite CuInxGa1-xSe2 (CIGS) thin films grown by magnetronsputtering. Films with (220/204) and (112) preferred orientation aswell as randomly oriented films were prepared. The effects of anIn2Se3 wetting layer and the working pressure on the texture transitionphenomena were examined. A large-grained CIGS film with (220/204) texture was formed at 400°C with the inclusion of a thin (80 nm)In2Se3 layer and liquid phase (excess copper selenide phase)formation, and the reaction mechanism is proposed. The devicedeposited at 2.0 Pa on an In2Se3 layer exhibited the optimal electricalproperties.
Yong Cui,Yong-Bo Song,Lin Ma,Yan-Feng Liu,Guo-Dong Li,Chun-Fu Wu,Jing-Hai Zhang 대한약학회 2010 Archives of Pharmacal Research Vol.33 No.10
This study utilized the E. coli expression system to investigate the role of amino acid residues in toxin from the Chinese scorpion - Buthus martensii Karsch (BmKAS). To evaluate the extent to which residues of the toxin core contribute to its analgesic activity, ten mutants of BmKAS were obtained by PCR. Using site-directed mutagenesis, all of these residues were substituted with different amino acids. This study represents a thorough mapping and elucidation of the epitopes that form the molecular basis of the toxin’s analgesic activity. Our results showed large mutant-dependent differences that emphasize the important roles of the studied residues.
Yong-Gui Chen,Yong He,Wei-min Ye,Ling-Yan Jia 한국공업화학회 2015 Journal of Industrial and Engineering Chemistry Vol.26 No.-
The competitive adsorption of Na(I)/Cr(III) and Cr(III)/Cu(II) on GMZ bentonite was studied by batch experiments. The results show that the bentonite has larger total adsorption amount of Cu(II) and Cr(III) in binary ions solution compared to that of single ion solution. Increasing of Na(I) concentration reduces the adsorption capacity of Cr(III) in their binary solution. The phenomenon Cr(III) has a lager adsorption than Cu(II) indicate that the adsorption capacity of Cu(II) is inhibited in their binary solution. The sequence of distribution coefficients (Kd) in the solution as follow: Kd binary (Cr) > Kd single (Cu) > Kd single (Cr) > Kd binary (Cu).
( Yan Zhang ),( De Ying Zhang ),( Yan Fang Zhao ),( Jin Wang ),( Juan Wen He ),( Jin Yong Luo ) 생화학분자생물학회(구 한국생화학분자생물학회) 2013 BMB Reports Vol.46 No.2
Although BMP6 is highly capable of inducing osteogenic differentiation of mesenchymal progenitor cells (MPCs), the molecular mechanism involved remains to be fully elucidated. Using dominant negative (dn) mutant form of type I and type II TGFβ receptors, we demonstrated that three dn-type I receptors (dnALK2, dnALK3, dnALK6), and three dn-type II receptors (dnBMPRII, dnActRII, dnActRIIB), effectively diminished BMP6- induced osteogenic differentiation of MPCs. These findings suggested that ALK2, ALK3, ALK6, BMPRII, ActRII and ActRIIB are essential for BMP6-induced osteogenic differentiation of MPCs. However, MPCs in this study do not express ActRIIB. Moreover, RNA interference of ALK2, ALK3, ALK6, BMPRII and ActRII inhibited BMP6-induced osteogenic differentiation in MPCs. Our results strongly suggested that BMP6-induced osteogenic differentiation of MPCs is mediated by its functional TGFβ receptors including ALK2, ALK3, ALK6, BMPRII, and ActRII. [BMB Reports 2013; 46(2): 107-112].