http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
R. F. Xu,K. Li,G. H. Chen,B. Y. Z. Qiang,D. L. Mo,B. Fan,C. C. Li,M. Yu,M. J. Zhu,T. A. Xiong,B. Liu 아세아·태평양축산학회 2005 Animal Bioscience Vol.18 No.7
New polymorphism of major histocompatibility complex B-G genes was investigated by amplification and digestion of a 401bp fragment including intron 1 and exon 2 using polymerase chain reaction-restriction fragment length polymorphism (PCRRFLP) technique with two restriction enzymes of Msp I and Tas I in eight breeds of Chinese indigenous chickens and one exotic breed. In the fragment region of the gene, three novel single nucleotide polymorphisms (SNPs) were detected at the two restriction sites. We found the transition of two nucleotides of A294G and T295C occurred at Tas I restriction site, and consequently led to a nonsynonymous substitution of asparagine into serine at position 54 within the deduced amino acid sequence of immunoglobulin variableregion- like domain encoded by the exon 2 of B-G gene. It was observed at rare frequency that a single mutation of A294G occurring at the site, also caused an identical substitution of amino acid, asparagine 54-to-serine, to that we described previously. And the transversion of G319C at Msp I site led to a non-synonymous substitution, glutamine 62-to-histidine. The new alleles and allele frequencies identified by the PCR-RFLP method with the two enzymes were characterized, of which the allele A and B frequencies at Msp I and Tas I loci were given disequilibrium distribution either in the eight Chinese local breeds or in the exotic breed. By comparison, allele A at Msp I locus tended to be dominant, while, the allele B at Tas I locus tended to be dominant in all of the breeds analyzed. In Tibetan chickens, the preliminary association analysis revealed that no significant difference was observed between the different genotypes identified at the Msp I and Tas I loci and the laying performance traits, respectively.
Lai, Y.-T.,Wang, M.-Z.,Adachi, I.,Aihara, H.,Asner, D. M.,Aulchenko, V.,Aushev, T.,Bakich, A. M.,Bala, A.,Bhuyan, B.,Bobrov, A.,Bozek, A.,Brač,ko, M.,Browder, T. E.,Chang, P.,Chekelian, V.,Chen, American Physical Society 2014 PHYSICAL REVIEW D - Vol.89 No.5
<P>We search for the charmless B-o decay with final state particles p (Lambda) over bar pi(-)gamma using the full data sample that contains 772 x 10(6)B (B) over bar pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. This decay is predicted to proceed predominantly via the b -> s gamma radiative penguin process with a high energy photon. No significant signal is found. We set an upper limit of 6.5 x 10(-7) for the branching fraction of B-o -> p (Lambda) over bar pi(-)gamma at the 90% confidence level.</P>
Li, J.L.,Li, N.,Lee, H.S.,Xing, S.S.,Qi, S.Z.,Tuo, Z.D.,Zhang, L.,Li, B.B.,Chen, J.G.,Cui, L. Elsevier 2016 Fitoterapia Vol.109 No.-
<P>Four new sesqui-lignans, (7R, 7'R, 7 '' S, 8S, 8'S, 8 '' S)-4',5 ''-dihydroxy-3,5,3',4 ''-tetramethoxy-7,9':7',9-diepoxy4,8 ''-oxy-8,8'-sesquineo-lignan-7',9 ''-diol (1), (7R, 7'R, 7 '' S, 8S, 8'S, 8 '' S)-4',3'-dihydroxy-3,5,3',5',4'pentamethoxy-7,9':7',9-diepoxy-4,8'-oxy-8,8'-sesquineo-lignan-7',9'-diol (2), (7R, 7'R, 7'S, 8S, 8'S, 8'S)-3',4'dihydroxy-3,5,4',5 ''-tetramethoxy-7,9':7',9-diepoxy-4,8'-oxy-8,8'-sesquineo-lignan-7',9'-diol (3) and acanthopanax A (7) together with three known compounds (4-6) were isolated from the EtOAc-soluble extract of Acanthopanax senticosus. Their structures were elucidated on the basis of spectroscopic and physicochemical analyses. All the isolates were evaluated for in vitro inhibitory activity against DGAT1 and DGAT2. Among them, compounds 1-6 were found to exhibit selective inhibitory activity on DGAT1 with IC50 values ranging from 61.1 1.3 to 97.7 1.1 111\4 and compound 7 showed selective inhibition of DGAT2 with IC50 value 93.2 1.2. (C) 2016 Elsevier B.V. All rights reserved.</P>
Improvement of lower hybrid current drive systems for high-power and long-pulse operation on EAST
Wang M.,Liu L.,Zhao L.M.,Li M.H.,Ma W.D.,Hu H.C.,Wu Z.G.,Feng J.Q.,Yang Y.,Zhu L.,Chen M.,Zhou T.A.,Jia H.,Zhang J.,Cao L.,Zhang L.,Liang R.R.,Ding B.J.,Zhang X.J.,Shan J.F.,Liu F.K.,Ekedahl A.,Gonich 한국원자력학회 2022 Nuclear Engineering and Technology Vol.54 No.11
Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m2 . Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 C, much below the permissible value of tungsten material (~1200 C). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-activemultijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5 toroidally from the 4.6 GHz LH system and is not magnetically connected
Radiative decay of theψ(2S)into two pseudoscalar mesons
Bai, J. Z.,Ban, Y.,Bian, J. G.,Blum, I.,Chen, A. D.,Chen, G. P.,Chen, H. F.,Chen, H. S.,Chen, J.,Chen, J. C.,Chen, X. D.,Chen, Y.,Chen, Y. B.,Cheng, B. S.,Choi, J. B.,Cui, X. Z.,Ding, H. L.,Dong, L. Y American Physical Society 2003 Physical review. D, Particles and fields Vol.67 No.3
Chen, G.J.,Song, S.D.,Wang, B.X.,Zhang, Z.F.,Peng, Z.L.,Guo, C.H.,Zhong, J.C.,Wang, Y. Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.12
The objective of this study was to determine the effect of forage: concentrate ratio (F:C) on growth performance, ruminal fermentation and blood metabolites of housing-feeding yaks. Thirty-two Maiwa male yaks (initial body weight = $207.99{\pm}3.31kg$) were randomly assigned to four dietary treatments (8 yaks per treatment). Experimental diets were: A, B, C, D which contained 70:30, 60:40, 50:50 and 40:60 F:C ratios, respectively. Dry matter intake and average daily gain in yaks fed the C and D diets were greater (p<0.05) than yaks fed the A and B diets. No differences were found in ruminal $NH_3-N$, total volatile fatty acids, acetate, butyrate, valerate, and isovalerate concentrations. The propionate concentration was increased (p<0.05) in the C and D groups compared with the A and B diets. In contrast, the acetate to propionate ratio was decreased and was lowest (p<0.05) in the C group relative to the A and B diets, but was similar with the D group. For blood metabolites, no differences were found in serum concentrations of urea-N, albumin, triglyceride, cholesterol, low density lipoprotein, alanine aminotransferase, and aspartate aminotransferase (p>0.05) among treatments. Treatment C had a higher concentration of total protein and high density lipoprotein (p<0.05) than A and B groups. In addition, there was a trend that the globulin concentration of A group was lower than other treatments (p = 0.079). Results from this study suggest that increasing the level of concentrate from 30% to 50% exerted a positive effect on growth performance, rumen fermentation and blood metabolites in yaks.
Hysteresis Loops, Critical Fields and Energy Products for Exchange-spring Hard/soft/hard Trilayers
B. Z. Chen,S. Yan,Y. Z. Ju,G. P. Zhao,X. C. Zhang,M. Yue,J. Xia 한국자기학회 2015 Journal of Magnetics Vol.20 No.1
Macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by a three-dimensional (3D) model for exchange-coupled Sm-Co/α-Fe/Sm-Co trilayers with in-plane collinear easy axes. These results are carefully compared with the popular one-dimensional (1D) micromagnetic models and recent experimental data. It is found that the results obtained from the two methods match very well, especially for the remanence and coercivity, justifying the calculations. Both nucleation and coercive fields decrease monotonically as the soft layer thickness L<SUP>s</SUP> increases while the largest maximum energy product (roughly 50 MGOe) occurs when the thicknesses of hard and soft layers are 5 ㎚ and 15 ㎚, respectively. Moreover, the calculated angular distributions in the thickness direction for the magnetic moments are similar. Nevertheless, the calculated nucleation and pinning fields as well as the energy products by 3D OOMMF are systematically smaller than those given by the 1D model, due mainly to the stray fields at the corners of the films. These demagnetization fields help the magnetic moments at the corners to deviate from the previous saturation state and facilitate the nucleation. Such an effect enhances as Ls increases. When the thicknesses of hard and soft layers are 10 ㎚ and 20 ㎚, respectively, the pinning field difference is as large as 30%, while the nucleation fields have opposite signs.
Numerical investigation on residual stress in photovoltaic laminates after lamination
Q. Z. Zhang,B. F. Shu,M. B. Chen,Q. B. Liang,C. Fan,Z. Q. Feng,P. J. Verlinden 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.2
A series of simulations were carried out to investigate the residual stress induced in the photovoltaic laminate during the cooling processafter lamination with a global model and several submodels. The simulations focus separately on the effects of the cooling rate, thecell layout and anisotropy on the residual stress and deformation of the photovoltaic laminate in a comparative manner with the finiteelement method. The results have shown that significant stress concentration and twist occurs in the interconnection region in the cell. Inaddition, different cooling rates, cell layouts and anisotropy only influence the largest stress rather than the stress distribution and deformation. Therefore, the results of a uniform stationary isotropic model with fewer cells can provide enough insight into the stress distributionin real photovoltaic laminates and the modified largest first principal stress can be used for design and verification.
Garitte, B.,Nguyen, T. S.,Barnichon, J. D.,Graupner, B. J.,Lee, C.,Maekawa, K.,Manepally, C.,Ofoegbu, G.,Dasgupta, B.,Fedors, R.,Pan, P. Z.,Feng, X. T.,Rutqvist, J.,Chen, F.,Birkholzer, Jens,Wang, Q. Springer 2017 Environmental Earth Sciences Vol.76 No.9
<P>Coupled thermal-hydrological-mechanical (THM) processes in the near field of deep geological repositories can influence several safety features of the engineered and geological barriers. Among those features are: the possibility of damage in the host rock, the time for re-saturation of the bentonite, and the perturbations in the hydraulic regime in both the rock and engineered seals. Within the international cooperative code-validation project DECOVALEX-2015, eight research teams developed models to simulate an in situ heater experiment, called HE-D, in Opalinus Clay at the Mont Terri Underground Research Laboratory in Switzerland. The models were developed from the theory of poroelasticity order to simulate the coupled THM processes that prevailed during the experiment and thereby to characterize the in situ THM properties of Opalinus Clay. The modelling results for the evolution of temperature, pore water pressure, and deformation at different points are consistent among the research teams and compare favourably with the experimental data in terms of trends and absolute values. The models were able to reproduce the main physical processes of the experiment. In particular, most teams simulated temperature and thermally induced pore water pressure well, including spatial variations caused by inherent anisotropy due to bedding.</P>
Collapse Load Computation of Defective Pipelines Under Multi-Loading System
Cen, Z . Z .,Chen, H . F .,Liu, Y . H .,Xu, B . Y . 대한금속재료학회(대한금속학회) 1998 METALS AND MATERIALS International Vol.4 No.3
Based on the kinematic theorem of limit analysis, a finite element mathematical programming formulation of 3-D rigid-perfectly plastic bodies is presented. The penalty function method is used to deal with the plastic incompressibility. A direct iterative algorithm is employed in solving the above formulation. The numerical procedure has been applied to carry out the limit analysis of pipelines with or without defects on the outside surface under multi-loading system. The effects of ellipsoidal and rectangular part-through slots on the collapse loads of pipelines under multi-loading system are investigated in detail. All the numerical examples are given to illustrate its application.