http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소프트웨어 개발 프로젝트 제어를 위한 재작업 지표의 적용
한혁수,김한샘,Han Hyuk-Soo,Kim Han-Saem 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.1
소프트웨어 개발 프로젝트는 성공률이 30% 밖에 되지 않는 어려운 과제이다. 소프트웨어 개발 프로젝트가 실패하는 이유는 여러 가지가 있을 수 있으나, 체계적인 관리 소홀이 큰 비중을 차지하고 있다. 특히, 완성도가 떨어지는 산출물을 다음 단계로 진행시키는 것은 많은 시간과 노력을 허비하여 프로젝트를 실패로 이끌 수 있다. 이를 방지하기 위해 채택되고 있는 방식은 동료 검토(Peer Review) 또는 인스펙션(Inspection) 등과 같은 산출물들에 대한 검토활동이다. 문제가 발견된 산출물들은 다시 개발자에게 돌아가서 수정하게 되는데, 이 과정을 재작업 (Rework)이라고 한다. 프로젝트 관리자가 완성도가 떨어지는 산출물들을 다음 단계로 넘겨서 오류에 대한 막대한 비용을 지출하고 기간을 지연시키는 등의 사고를 막기 위하여, 본 연구에서는 재작업의 충실도를 높일 수 있는 방법을 연구하였다. 즉 프로젝트의 재작업 시에 작업분석을 시행함으로써 재작업된 결과의 검토 수준을 달리하는 재작업지표를 개발하였고, 이에 대한 검증을 위해 4개의 프로젝트를 선택하여 개발된 지표의 적용 여부를 관찰하고 그 효율성을 입증하였다. It is reported that the success ratio of software development projects has been only 30%. Many causes lower project's chance of success, particularly lack of systematic project management. Especially, moving on the next phase of project with unsatisfactory outputs can be very problematic because it can cause much waste of resource, time and even lead to the failure of the whole project. Peer review and inspection are some of the practices designed to prevent such waste and possible failure. When defects are identified through such progress, each developer has to work on the product component again and fix the problem. This process is called rework. In this paper, we propose a method for improving quality of reworked product component to prevent excessive cost and time consumed caused by moving on the next phase of a project with a problematic product component. More specifically, this paper suggests a rework indicator that measures the level of rework based on its complexity and severity and is used to choose appropriate checking method on reworked product component. The research also confirmed the method's usefulness and effectiveness by applying the suggested method on four projects.
일차 인공 슬관절 전치환술에서 자가 배액혈 재주입법과 무배액법의 비교
한혁수 ( Hyuk Soo Han ),강승백 ( Seung Baik Kang ),윤강섭 ( Kang Sup Yoon ),이지호 ( Ji Ho Lee ),이재협 ( Jae Hyup Lee ),조현철 ( Hyun Chul Jo ),이승환 ( Seung Hwan Rhee ),김태우 ( Tae Woo Kim ) 대한슬관절학회 2008 대한슬관절학회지 Vol.20 No.2
목적: 인공 슬관절 전치환술 후에 동종 혈액 수혈에 따른 비용 및 감염의 위험 때문에 환자 자신의 배액된 혈액을 재주입하는 자가 수혈 배액기가 사용되어 왔다. 일반 배액기와는 많은 비교 연구가 이루어졌으나, 배액기를 사용하지 않는 경우와는 비교연구가 적었다. 이에 인공 슬관절 전치환술에서 자가 배액혈 재주입법과 무배액법의 술 후 초기 결과를 분석하였다. 대상 및 방법: 2003년 1월부터 2006년 3월까지 인공 슬관절 전치환술을 시행받은 환자 중 양측을 동시에 시행 받지 않은 자가 배액혈 재주입군과 무배액군 각각 30예를 성별과 연령으로 짝짓기 선정하여 후향적 분석을 하였다. 2003년 1월 이후로 치환물 삽입 완료 후, 지혈대의 압력을 제거하고, 세밀한 지혈 후 봉합하였다. 2005년 10월까지는 동의가 있는 경우 자가 수혈 배액기를 사용하였고, 술 후 8시간 이내에 배액된 혈액을 재주입하고도 혈 중 혈색소(hemoglobin)가 10 g/dL 이하인 경우 동종 혈액 수혈을 시행하였다. 2005년 11월 이후에는 위와 동일한 방법으로 수술을 시행하고, 배액기를 사용하지 않았으며, 같은 기준으로 수혈을 시행하였다. 술 전 변수로는 나이, 성별, 비만도, 진단명, 수술 및 감염의 기왕력, 항응고제 사용여부, 동반된 내과적 질환을, 술 후 변수로는 혈색소, 혈소판, 헤마토크릿의 변화, 동종 혈액 수혈의 빈도 및 양, 술 후 진통제의 사용량, 술 후 합병증(창상 분비 지연 또는 창상 주위 혈종, 표재성 감염, 급성기 심부 감염, 심부 정맥 혈전증, 관절 강직)의 발생 유무, 술 후 재활의 진행 정도, 외래 추시 중측정한 임상 점수를 비교 분석하였다. 결과: 평균 술 후 동종 혈액 수혈의 양은 무배액군에서 더 많았으나 통계적으로 유의하지 않았다. 술 후 평균 혈색소 수치와 술 후 평균 헤마토크릿 수치는 자가 배액혈 재주입군에서 술 후 2주까지 높은 결과를 보였으며, 술 후 2일과 7일의 결과는 통계적으로 유의하였다. 창상 치유 지연, 술 후 감염의 빈도는 무배액군에서 높았다. 결론: 자가 배액혈 재주입법을 사용한 경우, 무배액법에 비하여 동종 혈액 수혈량, 술 후 혈색소 및 헤마토크릿의 회복, 진통제 사용, 재활의 진행, 단기 임상 결과에 있어 유의한 차이를 보이지 않았으나, 창상치유와 술 후 감염의 합병증 발생 빈도에 있어 우수하였다. Purpose: Primary total knee arthroplasty is associated with considerable blood loss, and allergenic blood transfusions are frequently necessary. Because of the cost and risks of allogenic blood transfusions, the autologous drainage blood reinfusion technique has been developed as an alternative transfusion technique. A number of studies have compared the reinfusion techniques with standard suction drainage, but few reports have compared the reinfusion technique with the technique that uses no drain. We analyzed the early results after primary total knee arthroplasty with using autologous drainage blood reinfusion and no drain. Materials and Methods: We selected 30 patients who underwent primary total knee arthroplasty with using no drain between November 2005 and March 2006 and they were matched for age and gender with 30 patients who underwent primary total knee arthroplasty with using the autologous drainage blood reinfusion technique between January 2003 and October 2005. All the operations were done under a pneumatic tourniquet and meticulous hemostasis was performed after deflation of the tourniquet. We have retrospectively reviewed the preoperative data (age, gender, the body mass index, the diagnosis, a history of knee surgery, infection and/or anticoagulant therapy, and the medical cormorbidities) and the postoperative data (the hemoglobin level, the hematocrit and the platelet count during hospitalization, the amount of allogenic blood transfusion and narcotics, the complications, the rehabilitation process and the clinical scores). Results: The amount of allogenic blood transfusion in the autologous drainage blood reinfusion group was greater than that of the no drain group, but the difference was not statistically significant. The hemoglobin level and hematocrit during hospitalization were higher in the autologous drainage blood reinfusion group, which was significant at the postoperative second and seventh days. There was a case of deep infection in the no drain group. Conclusion: The autologous drainage blood reinfusion method when performing primary total knee arthroplasty did not show any significant clinical benefit over the no-drain method with regards to allogenic blood transfusions, the amount of narcotic used, the rehabilitation processes and the clinical scores. However, the incidences of wound complication and infection were higher in the no drain group.
한혁수 ( Hyuk Soo Han ),정철용 ( Chul Yong Chung ),김효영 ( Hyo Young Kim ) 한국감성과학회 1999 추계학술대회 Vol.1999 No.-
사이버 채팅 시스템(Cyber Chatting System)은 서로 다른 곳에서 통신을 하는 사용자들이 가상의 공간에서 대화할 수 있도록 서비스를 제공한다. 현재 국내외로 많은 사이버 채팅 시스템이 운영 중에 있다. 사이버 채팅 시스템들도 다른 시스템들과 마찬가지로 사용자들이 원하는 서비스를 제공하고 있는가를 판단하고 개선 방향을 얻기 위해서는 사용성 평가를 받아야 한다. 사용성 평가는 사용성 요소들을 중심으로 이루어지기 때문에 본 논문에서는 사이버 채팅 시스템을 평가하기 위해 필요한 사용성 요소들을 분석하여 보았다. 분석결과 기존의 만족도와 수행도 이외에 정신 모형을 기반으로하는 체크리스트의 필요성이 발견되었다.
한반도 서해연안에 분포하는 사질퇴적체의 분포 및 음향특성연구
한혁수(Hyuk-Soo Han),이상민(Sang-Min Lee),정초기(Cho-Ki Jung),안영길(Young-Gil Ahn),김서철(Seo-Cheal Kim),박인영(In-Young Park) 한국마린엔지니어링학회 2009 한국마린엔지니어링학회 학술대회 논문집 Vol.2009 No.-
A Large part of the sea floor in the western shelf of Korea peninsula is covered by sand deposits witch formed during the postglacial transgression(Park et al. 2006). Distribute echo character of shelf sand ridge into four classes (Type Ⅰ, Type Ⅱ, Type Ⅲ, Type Ⅳ). These shelf sand ridges are large and elongate shape with a length up to 100 ㎞ and width 1 to 10 ㎞.
한혁수(Hyuk-Soo Han),도성룡(Sung-Ryong Do) 한국IT서비스학회 2011 한국IT서비스학회지 Vol.10 No.4
It is necessary to have measurement and analysis activity for managing software project. At least, every project measures time and cost in order to figure it out whether it will finish within its deadline. CMMI has Measurement and Analysis process in Maturity Level 2. In Measurement and Analysis process, Indicators for decision making in project management are defined and analysis procedure of the measurements to get the indicators are specified. Also, the way of collecting the data and storing them is also planned. Establishing efficient and effective measurement and analysis process in the organization by improving existing process is very important for project success. In this paper, we provide a method for analyzing the measurement and analysis process and improving it based on IDEAL model. It will support the organizations which are trying to adopt CMMI to establish measurement and analysis process.