http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정석훈,서헌덕,박범영,박재홍,박성민,정문기,정해도,김형재,Jeong, Sukhoon,Seo, Heondeok,Park, Boumyoung,Park, Jaehong,Park, Seungmin,Jeong, Moonki,Jeong, Haedo,Kim, Hyoungjae 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.9
This study introduces Electro-chemical Mechanical Deposition(ECMD) lot making Cu interconnect. ECMD is a novel technique that has ability to deposit planar conductive films on non-planar substrate surfaces. Technique involves electrochemical deposition(ECD) and mechanical sweeping of the substrate surface Preferential deposition into the cavities on the substrate surface nay be achieved through two difference mechanisms. The first mechanism is more chemical and essential. It involves enhancing deposition into the cavities where mechanical sweeping does not reach. The second mechanism involves reducing deposition onto surface that is swept. In this study, we demonstrate ECMD process and characteristic. We proceeded this experiment by changing of distribution of current density on divided water area zones and use different pad types.
CMP시 SiO<sub>2</sub> 슬러리의 마찰 특성과 연마결과에 관한 연구
이현섭,박범영,서헌덕,정재우,정석훈,정해도,Lee Hyunseop,Park Boumyoung,Seo Heondeok,Jung Jaewoo,Jeong Sukhoon,Jeong Haedo 대한기계학회 2005 大韓機械學會論文集A Vol.29 No.7
The effects of mechanical parameters on the characteristics of chemical mechanical polishing(CMP) can be directly evaluated by friction force. The piezoelectric quartz sensor for friction force measurement was installed, and friction force could be detected during CMP process. Furthermore, friction energy can be calculated by multiplying relative velocity by integration of the friction force throughout the polishing time. $SiO_2$ slurry for interlayer dielectric(ILD) CMP was used in this experiment to consider the relation of frictional characteristics and polishing results. From this experiment, it is proven that the friction energy is an essential factor of removal rate. Also, the friction force is related to removal amount per unit length(dH/ds) and friction energy has corelation to the removal rate(dH/dt) and process temporature. Moreover, within wafer non-unifornity(WIWNU) is related to coefficient of friction because of the mechanical moment equilibrium. Therefore, the prediction of polishing result would be possible by measuring friction force.
이현섭,박범영,서헌덕,박기현,정해도,Lee, Hyunseop,Park, Boumyoung,Seo, Heondeok,Park, Kihyun,Jeong, Haedo 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.4
Stick-slip friction is one of the material removal mechanisms in tribology. It occurs when the static friction force is larger than the dynamic friction force, and make the friction curve fluctuated. In the friction monitoring of chemical mechanical polishing(CMP), the friction force also vibrates just as stick-slip friction. In this paper, an attempt to show the similarity between stick-slip friction and the friction of CMP was conducted. The prepared hard pa(IC1000/Suba400 stacked/sup TM/) and soft pad(Suba400/sup TM/) were tested with SiO₂ slurry. The friction force was measured by piezoelectric sensor. According to this experiment, it was shown that as the head and table velocity became faster, the stick-slip time shortened because of the change of real contact area. And, the gradient of stick-slip period as a function of head and table speed in soft pad was more precipitous than that of hard one. From these results, it seems that the fluctuating friction force in CMP is stick-slip friction caused by viscoelastic behavior of the pad and the change of real contact area.
박범영,이현섭,박기현,정석훈,서헌덕,정해도,김호윤,김형재,Park, Boumyoung,Lee, Hyunseop,Park, Kiyhun,Jeong, Sukhoon,Seo, Heondeok,Jeong, Haedo,Kim, Hoyoun,Kim, Hyoungjae 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.9
Chemical mechanical polishing(CMP) has become the process of choice for modem semiconductor devices to achieve both local and global planarization. CMP is a complex process which depends on numerous variables such as macro, micro and nano-geometry of pad, relative velocity between pad and wafer stiffness and dampening characteristics of pad, slurry, pH, chemical components of slurry, abrasive concentration, abrasive size, abrasive shape, etc. Especially, an oxidizer of chemical components is very important remove a target material in metal CMP process. This paper introduces the effect of oxidizer such as $H_2O_2,\;Fe(NO_3)_3\;and\;KIO_3$ in slurry for tungsten which is used in via or/and plug. Finally the duplex reacting mechanism of $oxidizer(H_2O_2)$ through adding the $catalyst(Fe(NO_3)_3)$ could acquire the sufficient removal rate in tungsten CMP.
Self-conditioning 고정입자패드를 이용한 CMP
박범영,이현섭,박기현,서헌덕,정해도,김호윤,김형재,Park, Boumyoung,Lee, Hyunseop,Park, Kihyun,Seo, Heondeok,Jeong, Haedo,Kim, Hoyoun,Kim, Hyoungjae 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.4
Chemical mechanical polishing(CMP) process is essential technology to be applied to manufacturing the dielectric layer and metal line in semiconductor devices. It has been known that overpolishing in CMP depends on pattern selectivity as a function of density and pitch, and use of fixed abrasive pad(FAP) is one method which can improve the pattern selectivity. Thus, dishing & erosion defects can be reduced. This paper introduces the manufacturing technique of FAP using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. When applied to tungsten blanket wafers, the FAP resulted in appropriate performance in point of uniformity, material selectivity and roughness. Especially, reduced dishing and erosion was observed in CMP of tungsten pattern wafer with the proposed FAP.
박범영,이현섭,김형재,서헌덕,김구연,정해도,Park, Boumyoung,Lee, Hyunseop,Kim, Hyoungjae,Seo, Heondeok,Kim, Gooyoun,Jeong, Haedo 한국전기전자재료학회 2004 전기전자재료학회논문지 Vol.17 No.10
Chemical mechanical polishing (CMP) process was studied in terms of tribology in this paper. CMP performed by the down force and the relative motion of pad and wafer with slurry is typically tribological system composed of friction, wear and lubrication. The piezoelectric quartz sensor for friction force measurement was installed and the friction force was detected during CMP process. Various friction signals were attained and analyzed with the kind of pad, abrasive and abrasive concentration. As a result of experiment, the lubrication regime is classified with ηv/p(η, v and p; the viscosity, relative velocity and pressure). The characteristics of friction and material removal mechanism is also different as a function of the kind of abrasive and the abrasive concentration in slurry. Especially, the material removal per unit distance is directly proportional to the friction force and the non~uniformity has relation to the coefficient of friction.
Self-Conditioning을 이용한 고정입자패드의 텅스텐 CMP
박범영(Boumyoung Park),김호윤(Hoyoun Kim),서헌덕(Heondeok Seo),정해도(Haedo Jeong) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
The chemical mechanical polishing(CMP) is necessarily applied to manufacturing the dielectric layer<br/> and metal line in the semiconductor device. The conditioning of polishing pad in CMP process<br/> additionally operates for maintaining the removal rate, within wafer non-uniformity, and wafer to wafer<br/> non-uniformity. But the fixed abrasive pad(FAP) using the hydrophilic polymer with abrasive that has<br/> the swelling characteristic by water owns the self-conditioning advantage as compared with the general<br/> CMP. FAP also takes advantage of planarity, resulting from decreasing pattern selectivity and defects<br/> such as dishing due to the reduction of abrasive concentration. This paper introduces the manufacturing<br/> technique of FAP. And the tungsten CMP using FAP achieved the good conclusion in point of the<br/> removal rate, non-uniformity, surface roughness, material selectivity, micro-scratch free contemporary<br/> with the pad life-time.
정해도(Haedo Jeong),박범영(Boumyoung Park),이현섭(Hyunseop Lee),김형재(Hyoungjae Kim),서헌덕(Heondeok Seo) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
The CMP monitoring system was newly developed by the aid of friction force measurement, resulting from installation of piezoelectric quartz sensor on R&D polisher. The correlation between friction and CMP results was investigated in terms of tribological aspects by using the monitoring system. Various friction signals were monitored and analyzed by the change of experimental conditions such as pressure, velocity, pad and slurry. First of all, the lubrication regimes were classified with Sommerfeld Number through measuring coefficient of friction in ILD CMP. And then, the removal mechanism of abrasives could be understood through the correlation with removal rate and coefficient of friction. Especially, the amount of material removal per unit sliding distance is directly proportional to the friction force. The uniformity of CMP performances was also deteriorated as coefficient of friction increased.