http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심국보,박정환,이준호 한국목재공학회 2003 목재공학 Vol.31 No.5
국산 주요 침엽수재인 소나무, 잣나무, 낙엽송의 철물접합부 인장하중 특성 구명을 위하여 본 연구를 수행하였다. 철물 접합부의 최대 인장하중은 AA형의 경우 소나무가 3,612 kgf로 낙엽송, 잣나무에 비해 각각 1.2배, 1.7배, EA형의 경우 2,704 k9f로 1.1배, 1.5배 우수하였다. 또한 AA형은 EA형에 비해 3 수종 모두 약 1.2배 이상 높은 인장하중을 나타내었다. 철물접합부의 파괴모드는 주로 이의 빠짐, 철물의 인장파괴와 목재의 전단파괴로 이루어지며, 특히 소나무 접합부는 철물의 인장파괴를 나타내었다. 철물접합부재의 인장하중-변위 특성은 Foschi 모형으로 정확하게 추정할 수 있었으며 , 철물접합부의 초기강성은 소나무 접합부재가 높게 나타났다. 국산 침엽수재의 철물접합부에 대한 설계하중은 소나무, 낙엽송, 잣나무의 순으로 높게 나타났으며, AA형의 경우 이당 설계하중이 소나무 25 kgf, 낙엽송 22 kgf, 잣나무 15 kgf이었으며, EA형의 경우 소나무 19 kgf, 낙엽송 17 kgf, 잣나무 13 kgf 이었다. This study was conducted to evaluate the tensile properties of metal plate connector for the domestic major softwoods, such as Korean red pine, Korean white pine, and Japanese larch. The maximum tensile load of Korean red pine was 3,612㎏f in AA type, it was 1.2 and 1.7 times higher load than that of Japanese larch and Korean white pine. In EA type, it was 2,704㎏f, and 1.1 and 1.5 times higher than the loads of Japanese larch and Korean white pine. The failure modes of metal plate connector were metal plate withdrawal, plate tensile failure, and wood shear block failure. The failure mode of Korean red pine connector was tensile failure of plate, that is reason of the high tensile load resistance for metal plate connections in Korean red pine. The mechanical properties of metal plate connector could be predicted by the Foschi model parameter. In the initial stage, the Korean red pine connector was stiffer than the other species. The design values for metal plate connector per tooth was 25, 22, and 15kgf for Korean red pine, Japanese larch, and Korean white pine in AA type and 19, 17, and 13㎏f in EA type.
소나무 고목재와 건전재의 물리, 기계, 화학적 특성 차이
심국보(Kug-Bo Shim),이도식(Do-Sik Lee),박병수(Byung-Soo Park),조성택(Sung-Taig Cho),김광모(Kwang-Mo Kim),여환명(Hwan-Myeong Yeo) 한국산림바이오에너지학회 2006 산림바이오에너지 Vol.25 No.2
안동 봉정사 대웅전의 지붕구조로 사용되었던 해체부재와 새로이 벌채된 소나무재의 물리적, 기계적, 화학적 특성을 평가 분석하였다. 고목재의 해부학적 분석에 의해 만재부위에서 수지의 응고현상을 관찰할 수 있었다. 또한 열화에 의한 비중의 감소, 가도관의 미세할렬이 발생하였으며, 가도관 미세할렬은 S2층 마이크로휘브릴 경사각과 동일한 각도를 갖는 것으로 판단되었다. 고목재의 휨강도, 압축강도 및 전단강도는 모두 35-27% 가량 감소하였으며, 초음파 비파괴시험에 의한 동적탄성계수는 목재의 사용기간이 길어짐에 따라 감소하는 경향을 나타내었다. 목재의 열화는 비중과 동적 탄성계수의 측정으로 확인할 수 있었다. 또한 길이방향 동적탄성계수의 측정으로부터 기계적 성능의 예측이 가능하였다. 목재의 부후를 판정할 수 있는 1% NaOH 추출 결과 고목재에서 부후가 많이 진행되었음을 확인하였다. 이에 따라 목재의 열화는 화학조성분의 분석에 의해 평가가 가능할 것으로 판단되었다. 이 연구의 결과는 시간의 경과에 따른 소나무의 물성 변화 분석으로부터 장기적으로 사용하는 목재의 물성 변화를 이해하고 예측을 가능하게 하는 자료로 활용될 수 있을 것이다. The physical, mechanical and chemical properties of old and new Korean red pine (Pinus densiflora) were analyzed. The old woods were from dismantled timbers of Bonjungsa temple. The crystallized resin in the latewood was observed by microscopic analysis. Also, reduction of specific gravity, occurrence of microscopic cleavage of tracheid was observed in the old wood. The angle of microscopic cleavage of tracheid is estimated with the same angle of micro-fibril angle of S2 layer. The bending, compression and shear strength of old wood were decreased about 35-27% than those of new wood. Dynamic modulus of elasticity measured by ultrasonic nondestructive test has the tendency of reducing by the time elapse of the wood usage. Therefore, deterioration of wood could be measured by reduction of specific gravity and dynamic MOE. The static MOE and mechanical properties of old wood could be predictable by measuring dynamic MOE in the longitudinal direction. Extractives of the old wood in 1-% NaOH solution are larger quantity than new wood. Therefore the decay of the wood could be evaluated by analyzing the chemical compound, especially 1-% NaOH solution. The results of this research could be used for understanding and prediction of the changing properties with elapsing time of wood.
비파괴 시험에 의한 국산 침엽수 2×6" 구조부재의 등급구분
심국보(Kug-Bo Shim),박정환(Jung-Hwan Park),김광모(Kwang-Mo Kim) 한국산림바이오에너지학회 2006 산림바이오에너지 Vol.25 No.2
국산 침엽수재의 구조재 활용에 필요한 등급구분을 위해 소나무, 잣나무와 낙엽송 2×6″부재에 대해 초음파를 이용한 비파괴 방법을 적용하였다. 정적 탄성계수와 초음파 시험에 의한 동적 탄성계수의 상관관계를 나타내는 k-factor는 소나무의 경우 1.0602, 잣나무 1.0013, 낙엽송 1.2320로 나타났다. k-factor를 적용할 경우 비파괴방법에 의한 동적 탄성계수 측정에 의해 침엽수 구조부재 등급구분이 가능할 것으로 판단되었다. 기계응력 등급구분에서 소나무는 E9 이상의 등급이 전체의 76%인 반면 잣나무는 E7 이상의 등급이 전체의 85%, 낙엽송은 E11 이상의 등급이 68% 분포하였다. 정적 탄성계수와 휨파괴계수(MOR)의 상관관계도 비교적 높게 나타나 이를 동적 탄성계수로부터 추정한 k-factor와 연계할 경우 초음파 비파괴 등급구분 방법에 의해 국산 침엽수재의 휨강도 성능평가가 가능할 것으로 판단되었다. This study was carried out to provide basic data for using domestic structural softwood lumber efficiently and ensuring structural safety of timber structures. The ratios (k-factor) between static and dynamic MOE measured by ultrasonic device for 2×6 domestic softwood structural lumber are 1.0602 for Korean red pine, 1.0013 for Korean white pine and 1.2320 for Japanese larch. In machine grade using nondestructive method, 76% of Korean red pine was classified into higher than E9 grade, 85% of Korean white pine was sorted into higher than E7 grade and 68% of Japanese larch was classified into higher than E11 grade. Correlation between MOE and MOR by static bending with k-factor from nondestructive method provide a possibility to predict bending strength and allowable stress of domestic softwood structural lumber.
Error Correction Technique of Distance Measurement for ToF LIDAR Sensor
( Yeon-kug Moon ),( Young Bo Shim ),( Hyoung-kyu Song ) 한국인터넷정보학회 2018 KSII Transactions on Internet and Information Syst Vol.12 No.2
This paper presents design for error correcting algorithm of the time of flight (ToF) detection value in the light detection and ranging (LIDAR) system sensor. The walk error of ToF value is generated by change of the received signal power depending on distance between the LIDAR sensor and object. The proposed method efficiently compensates the ToF value error by the independent ToF value calculation from the received signal using both rising point and falling point. A constant error of ~0.05 m is obtained after the walk error correction while an increasing error up to ~1 m is obtained with conventional method..