http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yanmei Gao,Liang Fan,Weipeng Yang,Lu Shi,Dan Zhou,Ming Wang 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.45 No.3
The mechanical behaviors of the prefabricated steel-concrete composite beams are usually affected by the strength and the number of shear studs. Furthermore, the discrete degree of the arrangement for shear stud clusters, being defined as the clustering degree of shear stud λ in this paper, is an important factor for the mechanical properties of composite beams, even if the shear connection degree is unchanged. This paper uses an experimental and calculation method to investigate the influence of λ on the mechanical behavior of the composite beam. Five specimens (with different λ but having the same shear connection degree) of prefabricated composite beams are designed to study the ultimate supporting capacity, deformation, slip and shearing stiffness of composite beams. Experimental results are compared with the conventional slip calculation method (based on the influence of λ) of prefabricated composite beams. The results showed that the stiffness in the elastoplastic stage is reduced when λ is greater than 0.333, while the supporting capacity of beams has little affected by the change in λ. The slip distribution along the beam length tends to be zig-zagged due to the clustering of studs, and the slip difference increases with the increase of λ.
Yanmei Feng,Zhiqiang Wang,Yunfeng Yang,Xiang-Feng Wu,Xiaodong Gong,Yajian Liu,Yufei Li,Zuo-Lin Cao,Chao Wang,Xin Tong 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2018 NANO Vol.13 No.7
The Ag2SO3/NaNbO3 hybrids have been fabricated via a facile method at room temperature. Several methods such as X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy were used to characterize the samples. Moreover, the photocatalytic activity of the samples was assessed by degradation of rhodamine B and methyl orange under the visible light illumination. Experimental results indicated the photocatalytic degradation efficiency of the as-fabricated hybrids was first increased and then decreased with increasing the dosage of NaNbO3. When the molar ratio of Ag2SO3 to NaNbO3 was 1:0.7, the as-fabricated composites had the best photodegradation efficiency of 96.4% in 30 min for rhodamine B and 97.1% in 60 min for methyl orange, respectively. These were obviously higher than that of pure samples. Furthermore, Ag2SO3 was conjugated with NaNbO3 via chemical-bonds rather than physical contact. In addition, the possible photocatalytic degradation mechanism was also provided and the main roles during the process of photocatalytic degradation were played by holes.
Yurong Yang,Min Qiu,Li Liu,Dan Su,Yanmei Pi,Guomin Yan 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2016 NANO Vol.11 No.11
Designed as an anode material for sodium ion batteries, porous nitrogen-doped hollow carbon nanospheres (N-HCS, D = 200 nm) are successfully synthesized via the mature template-assisted method using silica and dopamine as template and carbon precursor, respectively. For detailed characterization of Raman, FTIR and XPS results, it is revealed that N-doping can form a disordered carbon structure and induce a large number of topological defects on carbon outer wall. The N-HCS electrode exhibits excellent cycling stability and rate capability, delivering a satisfying capacity of 306 mAh g-1 over 600 cycles at a discharging rate of 0.05 A g-1 and an attainable capacity of 188 mAh g-1 even at a high discharging rate of 3.0 A g-1. The excellent electrochemical performance of N-HCS can be attributed to the high content of pores. Moreover, the high content of pyridinic and graphitic N could facilitate the transfer of sodium ion and electron.
Zhu Wenli,Yang Qiaoling,Du Juan,Yin Pinpin,Yi Jun,Liu Yanmei,Wu Xuemei,Zhang Zhongyi 한국물리학회 2022 Current Applied Physics Vol.39 No.-
A quaternary CuO–CuS–ZnO–ZnS nanocomposite was successfully synthesized via a facile microwave irradiation based on the preprepared ZnS and CuO nanoparticles. CuO–CuS–ZnO–ZnS nanocomposite was a porous photocatalyst, providing excellent adsorption performance. It was sensitive to both ultraviolet and visible light, moreover, the photoelectrochemical measurements confirmed that there was a high separation rate and low recombination rate of photo-generated charge carriers in the nanocomposite, endowing excellent photocatalytic activity in the sunlight. Under the simulated solar light irradiation, the removal efficiency of rhodamine B (RhB) pollutant (30 mg/L) over CuO–CuS–ZnO–ZnS nanocomposite was 33.98 and 2.90 times of pristine CuO and ZnS, respectively. The outstandingt photocatalytic performance was attributed to Z-scheme charge transfer path.
Study of Hybrid DNA Physical Mapping Based on Approximation Algorithm with Errors
Zhenglong Liu,Yanmei Yang,Yujun Luo,Hongping Wang 보안공학연구지원센터 2015 International Journal of Hybrid Information Techno Vol.8 No.2
A human chromosome is a DNA molecule with approximately 108 base pairs. The techniques developed to date for sequencing are restricted to pieces of DNA with up to tens of thousands of base pairs. This means that when a piece is sequenced, only an extremely small part of a chromosome can be seen. Molecular biologists use special techniques to deal with DNA molecules comparable in size to a chromosome. These techniques enable them to create maps of an entire chromosome or of significant fractions of chromosomes. Computational techniques were studied that could potentially aid biologists in the map-generation process. An algorithm that solves the consecutive 1s problem was studied. Such a problem is a good model of hybridization mapping when there are no errors and when probes are unique. If errors are present, another approach is needed, and the approximation algorithm is a prospective problem solver for hybridization physical mapping of DNA with errors.
Liu Weiyi,Wang Fang,Sun Yanmei,Yang Lei,Chen Huihai,Liu Weijie,Zhu Bin,Hui Chaomao,Wang Shiwei 한국미생물학회 2020 The journal of microbiology Vol.58 No.11
Dragon bamboo (Dendrocalamus giganteus) is a giant sympodial bamboo species widely distributed in Asia. However, it remains unclear how dragon bamboo and soil microbes interact to affect soil properties. In this study, we investigated the planting patterns (semi-natural and artificial) on different slopes (sunny and shady) to determine the effects on soil properties and microbial community. The results showed that the soil in which dragon bamboo was grown was acidic, with a pH value of ~5. Also, the soil organic matter content, nitrogen hydrolysate concentration, total nitrogen, available potassium, and total potassium of the dragon bamboo seminatural forest significantly improved, especially on the sunny slope. In contrast, the available phosphorus level was higher in the artificial bamboo forest, probably owing to the phosphate fertilizer application. The bacterial and fungal diversity and the bacterial abundance were all higher on the sunny slope of the semi-natural forest than those in the other samples. The microbial operational taxonomic units (OTUs) shared between the shady and sunny slopes accounted for 47.8–62.2%, but the core OTUs of all samples were only 24.4– 30.4% of each sample, suggesting that the slope type had a significant effect on the microbial community. Some acidophilic microbes, such as Acidobacteria groups, Streptomyces and Mortierella, became dominant in dragon bamboo forest soil. A PICRUSt analysis of the bacterial functional groups revealed that post-translational modification, cell division, and coenzyme transport and metabolism were abundant in the semi-natural forest. However, some microorganisms with strong stress resistance might be activated in the artificial forest. Taken together, these results illustrated the influence of dragon bamboo growth on soil physicochemical property and microbial community, which might help understand the growth status of dragon bamboo under different planting patterns.
Xihong Zhao,Li Wang,Jin Chu,Yanmei Li,Yanyan Li,Zhenbo Xu,Lin Li,Mark E. Shirtliff,Xiaowei He,Yao Liu,Jihua Wang,Liansheng Yang 한국식품과학회 2010 Food Science and Biotechnology Vol.19 No.6
A loop-mediated isothermal amplification (LAMP) method for rapid detection of the food-borne Salmonella strains had been developed and evaluated in this study. The optimal reaction condition was found to be 65℃ for 45 min, with the detection limit as 1 pg DNA/tube and 100 CFU/reaction. Application of LAMP assays was performed on 214 food-borne Salmonella strains using a rapid procedure and easy result confirmation, where the specificity of LAMP and polymerase chain reaction (PCR)assays was 97.7% (209/214) and 91.6% (196/214),respectively; with a 100% specificity for both assays.