Effect of body condition score at calving on transition success in Nili Ravi buffaloes

Sayyad H. Magsi,Muhammad A. Rashid,Nisar Ahamed,Maqsood Akhter,Muhammad Q. Shahid 한국축산학회 2022 한국축산학회지 Vol.64 No.6

Body condition score (BCS) at calving is a vital indicator of the effectiveness of the beginning of lactation in dairy animals. The purpose of this study was to examine the effect of BCS at calving on milk production and transition success in dairy buffaloes. Thirty-six (36) Nili Ravi buffaloes were enrolled at 40 days of expected calving and followed through 90 days of lactation. The buffaloes were categorized into three groups according to their BCS (on a scale of 1–5 with 0.25 increments) as follows: 1) low, buffaloes with BCS ≤ 3.0; 2) medium, buffaloes with BCS 3.25–3.5; and 3) high, buffaloes with BCS ≥ 3.75. All buffaloes were fed a similar diet ad libitum. The lactation diet had increased concentrate allowance according to milk yield. The results revealed that the BCS at calving did not affect milk yield; however, fat percentage (fat%) was lower in the low-BCS group. Dry matter intake (DMI) was similar among the treatment groups, although post-calving BCS loss was greater in the high-BCS group compared to the medium- and the low-BCS groups. Similarly, the buffaloes in the high-BCS group had higher non-esterified fatty acids (NEFA) concentration compared to the low- and medium-BCS groups. No cases of metabolic disorders were observed during the study. The present results suggest that the buffaloes in the medium-BCS group appeared to perform better compared to the low- and the high-BCS groups with respect to milk fat% and blood NEFA concentration.

Flexure of cross-ply laminated plates using equivalent single layer trigonometric shear deformation theory

Sayyad, Atteshamuddin S.,Ghugal, Yuwaraj M. Techno-Press 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.51 No.5

An equivalent single layer trigonometric shear deformation theory taking into account transverse shear deformation effect as well as transverse normal strain effect is presented for static flexure of cross-ply laminated composite and sandwich plates. The inplane displacement field uses sinusoidal function in terms of thickness coordinate to include the transverse shear deformation effect. The cosine function in thickness coordinate is used in transverse displacement to include the effect of transverse normal strain. The kinematics of the present theory is much richer than those of the other higher order shear deformation theories, because if the trigonometric term (involving thickness coordinate z) is expanded in power series, the kinematics of higher order theories (which are usually obtained by power series in thickness coordinate z) are implicitly taken into account to good deal of extent. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. The closed-form solutions of simply supported cross-ply laminated composite and sandwich plates have been obtained. The results of present theory are compared with those of the classical plate theory (CPT), first order shear deformation theory (FSDT), higher order shear deformation theory (HSDT) of Reddy and exact three dimensional elasticity theory wherever applicable. The results predicted by present theory are in good agreement with those of higher order shear deformation theory and the elasticity theory.

An inverse hyperbolic theory for FG beams resting on Winkler-Pasternak elastic foundation

Sayyad, Atteshamuddin S.,Ghugal, Yuwaraj M. Techno-Press 2018 Advances in aircraft and spacecraft science Vol.5 No.6

Bending, buckling and free vibration responses of functionally graded (FG) higher-order beams resting on two parameter (Winkler-Pasternak) elastic foundation are studied using a new inverse hyperbolic beam theory. The material properties of the beam are graded along the thickness direction according to the power-law distribution. In the present theory, the axial displacement accounts for an inverse hyperbolic distribution, and the transverse shear stress satisfies the traction-free boundary conditions on the top and bottom surfaces of the beams. Hamilton's principle is employed to derive the governing equations of motion. Navier type analytical solutions are obtained for the bending, bucking and vibration problems. Numerical results are obtained to investigate the effects of power-law index, length-to-thickness ratio and foundation parameter on the displacements, stresses, critical buckling loads and frequencies. Numerical results by using parabolic beam theory of Reddy and first-order beam theory of Timoshenko are specially generated for comparison of present results and found in excellent agreement with each other.

Cylindrical bending of multilayered composite laminates and sandwiches

Sayyad, Atteshamuddin S.,Ghugal, Yuwaraj M. Techno-Press 2016 Advances in aircraft and spacecraft science Vol.3 No.2

In a whole variety of higher order plate theories existing in the literature no consideration is given to the transverse normal strain / deformation effects on flexural response when these higher order theories are applied to shear flexible composite plates in view of minimizing the number of unknown variables. The objective of this study is to carry out cylindrical bending of simply supported laminated composite and sandwich plates using sinusoidal shear and normal deformation plate theory. The most important feature of the present theory is that it includes the effects of transverse normal strain/deformation. The displacement field of the presented theory is built upon classical plate theory and uses sine and cosine functions in terms of thickness coordinate to include the effects of shear deformation and transverse normal strain. The theory accounts for realistic variation of the transverse shear stress through the thickness and satisfies the shear stress free conditions at the top and bottom surfaces of the plate without using the problem dependent shear correction factor. Governing equations and boundary conditions of the theory are obtained using the principle of minimum potential energy. The accuracy of the proposed theory is examined for several configurations of laminates under various static loadings. Some problems are presented for the first time in this paper which can become the base for future research. For the comparison purpose, the numerical results are also generated by using higher order shear deformation theory of Reddy, first-order shear deformation plate theory of Mindlin and classical plate theory. The numerical results show that the present theory provides displacements and stresses very accurately as compared to those obtained by using other theories.

Advanced Intelligent Vehicular Analytics (AIVA) using IMS Architecture

Munir Sayyad,Sanjay Nalbalwar,Jagdish Bakal,Shomik Dasgupta 보안공학연구지원센터 2011 International Journal of Smart Home Vol.5 No.2

Flexure of cross-ply laminated plates using equivalent single layer trigonometric shear deformation theory

Atteshamuddin S. Sayyad,Yuwaraj M. Ghugal 국제구조공학회 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.51 No.5

An equivalent single layer trigonometric shear deformation theory taking into account transverse shear deformation effect as well as transverse normal strain effect is presented for static flexure of cross-ply laminated composite and sandwich plates. The inplane displacement field uses sinusoidal function in terms of thickness coordinate to include the transverse shear deformation effect. The cosine function in thickness coordinate is used in transverse displacement to include the effect of transverse normal strain. The kinematics of the present theory is much richer than those of the other higher order shear deformation theories, because if the trigonometric term (involving thickness coordinate z) is expanded in power series, the kinematics of higher order theories (which are usually obtained by power series in thickness coordinate z) are implicitly taken into account to good deal of extent. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. The closed-form solutions of simply supported cross-ply laminated composite and sandwich plates have been obtained. The results of present theory are compared with those of the classical plate theory (CPT), first order shear deformation theory (FSDT), higher order shear deformation theory (HSDT) of Reddy and exact three dimensional elasticity theory wherever applicable. The results predicted by present theory are in good agreement with those of higher order shear deformation theory and the elasticity theory.

Buckling and free vibration analysis of multi-directional functionally graded sandwich plates

Ali Alnujaie,Atteshamuddin S. Sayyad,Lazreg Hadji,Abdelouahed Tounsi 국제구조공학회 2022 Structural Engineering and Mechanics, An Int'l Jou Vol.84 No.6

In this article, the buckling and free vibration of multi-directional FGM sandwich plates are investigated. The material properties of FGM sandwich plates are assumed to be varying continuously in the in the longitudinal, transverse and thickness directions. The material properties are evaluated based on Voigt’s micro-mechanical model considering power law distribution method with arbitrary power index. Equations of motion for the buckling and vibration analysis of multi-directional FGM sandwich plate are obtained based on refined shear deformation theory. Analytical solution for simply supported multidirectional FGM sandwich plate is carried out using Navier’s solution technique. The FGM sandwich plate considered in this work has a homogeneous ceramic core and two functionally graded face sheets. Influence of volume fraction index in the longitudinal, transverse and thickness direction, layer thickness, and geometrical parameter over natural frequency and critical buckling load of multi-directional FGM sandwich plate is investigated. The finding shows a multi-directional functionally graded structures perform better compared to uni-directional gradation. Hence, critical grading parameters have been identified which will guide researchers in selecting fabrication routes for improving the performance of such structures.

Analysis of laminated and sandwich spherical shells using a new higher-order theory

Shinde, Bharti M.,Sayyad, Atteshamudin S. Techno-Press 2020 Advances in aircraft and spacecraft science Vol.7 No.1

In the present study, a fifth-order shear and normal deformation theory using a polynomial function in the displacement field is developed and employed for the static analysis of laminated composite and sandwich simply supported spherical shells subjected to sinusoidal load. The significant feature of the present theory is that it considers the effect of transverse normal strain in the displacement field which is eliminated in classical, first-order and many higher-order shell theories, while predicting the bending behavior of the shell. The present theory satisfies the zero transverse shear stress conditions at the top and bottom surfaces of the shell. The governing equations and boundary conditions are derived using the principle of virtual work. To solve the governing equations, the Navier solution procedure is employed. The obtained results are compared with Reddy's and Mindlin's theory for the validation of the present theory.

CERTAIN NEW WP-BAILEY PAIRS AND BASIC HYPERGEOMETRIC SERIES IDENTITIES

Ali, S. Ahmad,Rizvi, Sayyad Nadeem Hasan Korean Mathematical Society 2017 대한수학회논문집 Vol.32 No.4

The Bailey lemma has been a powerful tool in the discovery of identities of Rogers-Ramanujan type and also ordinary and basic hyper-geometric series identities. The mechanism of Bailey lemma has also led to the concepts of Bailey pair and Bailey chain. In the present work certain new WP-Bailey pairs have been established. We also have deduced a number of basic hypergeometric series identities as an application of new WP-Bailey pairs.

Preparation of amorphous carvedilol polymeric microparticles for improvement of physicochemical properties

Priyanka Bhosale,Yogesh Pore,Fahim Sayyad 한국약제학회 2012 Journal of Pharmaceutical Investigation Vol.42 No.6

The aim of the present study was to enhance the physicochemical properties of poorly aqueous soluble carvedilol (CRV) by preparing its microparticles in presence and/or in absence of a hydrophilic carrier. The polymeric microparticles of CRV were prepared with polyvinylpyrrolidone K30 with or without addition of adsorbents like Aerosil200 and/or Sylysia350 by using spray drying technique. The dissolution profiles revealed that the drug and polymer ratio and colloidal silica both played critical role in solubility enhancement. The spray dried microparticles and drug alone were characterized by differential scanning calorimetry (DSC), X-ray powder diffraction, Fourier transformation infrared spectroscopy (FTIR), particle size analysis and scanning electron microscopy (SEM). DSC analysis showed that CRV transformed from the crystalline state to amorphous state by spray drying, confirmed by disappearance of its melting peak. The results of the X-ray analysis were in agreement with the thermal analysis data. It did not show characteristic crystalline drug peaks which confirmed that the amorphous form of CRV was present in the CRV loaded microparticles. FTIR analysis demonstrated hydrogen bonding interaction with an absence of significant chemical interaction between CRV and polymer. Spherical microparticles were yielded with smooth surfaces as observed by SEM. All in all, this work reveals that spray drying is a suitable technique for preparation of microparticles with improved physicochemical properties of CRV.