Fusarium Species from Sorghum in Thailand

Mohamed Nor, Nik M.I.,Salleh, Baharuddin,Leslie, John F. The Korean Society of Plant Pathology 2019 Plant Pathology Journal Vol.35 No.4

Sorghum is the fifth most important cereal worldwide, spreading from Africa throughout the world. It is particularly important in the semi-arid tropics due to its drought tolerance, and when cultivated in Southeast Asia commonly occurs as a second crop during the dry season. We recovered Fusarium from sorghum in Thailand and found F. proliferatum, F. thapsinum and F. verticillioides most frequently, and intermittent isolates of F. sacchari and F. beomiforme. The relatively high frequencies of F. proliferatum and F. verticillioides, suggest mycotoxin contamination, particularly fumonisins and moniliformin, should be evaluated. Genetic variation within the three commonly recovered species was characterized with vegetative compatibility, mating type, Amplified Fragment Length Polymorphisms (AFLPs), and female fertility. Effective population number ($N_e$) was highest for F. verticillioides and lowest for F. thapsinum with values based on mating type allele frequencies higher than those based on female fertility. Based on AFLP genetic variation, the F. thapsinum populations were the most closely related, the F. verticillioides populations were the most distantly related, and the F. proliferatum populations were in an intermediate position. The genetic variation observed could result if F. thapsinum is introduced primarily with seed, while F. proliferatum and F. verticillioides could arrive with seed or be carried over from previous crops, e.g., rice or maize, which sorghum is following. Confirmation of species transmission patterns is needed to understand the agricultural systems in which sorghum is grown in Southeast Asia, which are quite different from the systems found in Africa, Australia, India and the Americas.

Fusarium Species from Sorghum in Thailand

Nik M. I. Mohamed Nor,Baharuddin Salleh,John F. Leslie 한국식물병리학회 2019 Plant Pathology Journal Vol.35 No.4

Sorghum is the fifth most important cereal worldwide, spreading from Africa throughout the world. It is particularly important in the semi-arid tropics due to its drought tolerance, and when cultivated in Southeast Asia commonly occurs as a second crop during the dry season. We recovered Fusarium from sorghum in Thailand and found F. proliferatum, F. thapsinum and F. verticillioides most frequently, and intermittent isolates of F. sacchari and F. beomiforme. The relatively high frequencies of F. proliferatum and F. verticillioides, suggest mycotoxin contamination, particularly fumonisins and moniliformin, should be evaluated. Genetic variation within the three commonly recovered species was characterized with vegetative compatibility, mating type, Amplified Fragment Length Polymorphisms (AFLPs), and female fertility. Effective population number (Ne) was highest for F. verticillioides and lowest for F. thapsinum with values based on mating type allele frequencies higher than those based on female fertility. Based on AFLP genetic variation, the F. thapsinum populations were the most closely related, the F. verticillioides populations were the most distantly related, and the F. proliferatum populations were in an intermediate position. The genetic variation observed could result if F. thapsinum is introduced primarily with seed, while F. proliferatum and F. verticillioides could arrive with seed or be carried over from previous crops, e.g., rice or maize, which sorghum is following. Confirmation of species transmission patterns is needed to understand the agricultural systems in which sorghum is grown in Southeast Asia, which are quite different from the systems found in Africa, Australia, India and the Americas.

Structural controls on the Amgififa VMS (Volcanogenic Massive Sulfides) deposit in the southwestern part of the Haya terrain, Arabian Nubian Shield, Sudan

Mohammed S.M. Adam,Khalid A. Babikir,Jose F.H. Orellana,Young-Seog Kim 대한지질학회 2021 대한지질학회 학술대회 Vol.2021 No.10

The Amgififa deposit is located in the southwestern part of the Haya terrain in the Arabian Nubian Shield (ANS), Sudan. Mineral exploration and mining are active in this region at various scales (from artisanal to large-scale companies). The Ag, Cu, Zn, and Pb concentrations in the Amgififa deposit are ranging in 0.01-135 ppm, 35-30425 ppm, 18.49-1781.5 ppm, and 9.9-22797 ppm, respectively. However, the geological and structural setting of the deposit area is not well known because the host rock and ore bodies are covered by Quaternary sediments and active sands up to 7 meters. To unravel the structural controls on the Amgififa deposit, we conducted a systematic outcrop scale structural analysis based on the Amgififa mine pits and trenches. The geological and structural settings of the study area have high similarities with that of the southwestern part of the Neoproterozoic Nakasib Suture Zone (one of the most prominent structures of the ANS truncated by a younger SE trending sinistral Oko Shear Zone (OSZ)). The structural evolution in the region could be summarized as follows. At the early stage of D1, the NW-SE collision between Haya and Gebet terranes developed isoclinal inclined folds (F1) and regional foliation oriented NE-SW parallel to the F1 axial plane (transposition deformation). During the late stage of D1, the opening of the Amgififa pull-apart is triggered due to the dextral shear along right-stepping relay faults. During the D2 stage, as a result of a slight change in the regional stress direction from NW to NNW, the D1 structures and breccias within the pull-apart were uprightly folded with NE trending axial plane. During the D3 stage, the regional stress direction was changed to NNE, resulting in ~EW-trending folds (F3) and NNE extensional veins (Q2). Later on, D4 was developed when the dextral shear zones (which formed the pull-apart during D1) were inverted as sinistral due to ~ EW compression. During the D4 stage, EW extensional quartz vein and local thrust fault were formed around the deposit. The Amgififa deposit has the characteristics of non-classic VMS formed in a local extensional setting associated with a pull-apart resulted from the interaction between NW-SE trending shear zones.

Filter orthogonal frequency-division multiplexing scheme based on polar code in underwater acoustic communication with non-Gaussian distribution noise

Ahmed, Mustafa Sami,Shah, Nor Shahida Mohd,Al-Aboosi, Yasin Yousif,Gismalla, Mohammed S.M.,Abdullah, Mohammad F.L.,Jawhar, Yasir Amer,Balfaqih, Mohammed Electronics and Telecommunications Research Instit 2021 ETRI Journal Vol.43 No.2

The research domain of underwater communication has garnered much interest among researchers exploring underwater activities. The underwater environment differs from the terrestrial setting. Some of the main challenges in underwater communication are limited bandwidth, low data rate, propagation delay, and high bit error rate (BER). As such, this study assessed the underwater acoustic (UWA) aspect and explored the expression of error performance based on t-distribution noise. Filter orthogonal frequency-division multiplexing refers to a new waveform candidate that has been adopted in UWA, along with turbo and polar codes. The empirical outcomes demonstrated that the noise did not adhere to Gaussian distribution, whereas the simulation results revealed that the filter applied in orthogonal frequency-division multiplexing could significantly suppress out-of-band emission. Additionally, the performance of the turbo code was superior to that of the polar code by 2 dB at BER 10-3.

Resistance Potential of Bread Wheat Genotypes Against Yellow Rust Disease Under Egyptian Climate

Mahmoud, Amer F.,Hassan, Mohamed I.,Amein, Karam A. The Korean Society of Plant Pathology 2015 Plant Pathology Journal Vol.31 No.4

Yellow rust (stripe rust), caused by Puccinia striiformis f. sp. tritici, is one of the most destructive foliar diseases of wheat in Egypt and worldwide. In order to identify wheat genotypes resistant to yellow rust and develop molecular markers associated with the resistance, fifty F8 recombinant inbred lines (RILs) derived from a cross between resistant and susceptible bread wheat landraces were obtained. Artificial infection of Puccinia striiformis was performed under greenhouse conditions during two growing seasons and relative resistance index (RRI) was calculated. Two Egyptian bread wheat cultivars i.e. Giza-168 (resistant) and Sakha-69 (susceptible) were also evaluated. RRI values of two-year trial showed that 10 RILs responded with RRI value >6 <9 with an average of 7.29, which exceeded the Egyptian bread wheat cultivar Giza-168 (5.58). Thirty three RILs were included among the acceptable range having RRI value >2 <6. However, only 7 RILs showed RRI value <2. Five RILs expressed hypersensitive type of resistance (R) against the pathogen and showed the lowest Average Coefficient of Infection (ACI). Bulked segregant analysis (BSA) with eight simple sequence repeat (SSR), eight sequence-related amplified polymorphism (SRAP) and sixteen random amplified polymorphic DNA (RAPD) markers revealed that three SSR, three SRAP and six RAPD markers were found to be associated with the resistance to yellow rust. However, further molecular analyses would be performed to confirm markers associated with the resistance and suitable for marker-assisted selection. Resistant RILs identified in the study could be efficiently used to improve the resistance to yellow rust in wheat.

Resistance Potential of Bread Wheat Genotypes Against Yellow Rust Disease Under Egyptian Climate

Amer F. Mahmoud,Mohamed I. Hassan,Karam A. Amein 한국식물병리학회 2015 Plant Pathology Journal Vol.31 No.4

Yellow rust (stripe rust), caused by Puccinia striiformis f. sp. tritici, is one of the most destructive foliar diseases of wheat in Egypt and worldwide. In order to identify wheat genotypes resistant to yellow rust and develop molecular markers associated with the resistance, fifty F8 recombinant inbred lines (RILs) derived from a cross between resistant and susceptible bread wheat landraces were obtained. Artificial infection of Puccinia striiformis was performed under greenhouse conditions during two growing seasons and relative resistance index (RRI) was calculated. Two Egyptian bread wheat cultivars i.e. Giza-168 (resistant) and Sakha-69 (susceptible) were also evaluated. RRI values of two-year trial showed that 10 RILs responded with RRI value >6 <9 with an average of 7.29, which exceeded the Egyptian bread wheat cultivar Giza-168 (5.58). Thirty three RILs were included among the acceptable range having RRI value >2 <6. However, only 7 RILs showed RRI value <2. Five RILs expressed hypersensitive type of resistance (R) against the pathogen and showed the lowest Average Coefficient of Infection (ACI). Bulked segregant analysis (BSA) with eight simple sequence repeat (SSR), eight sequence-related amplified polymorphism (SRAP) and sixteen random amplified polymorphic DNA (RAPD) markers revealed that three SSR, three SRAP and six RAPD markers were found to be associated with the resistance to yellow rust. However, further molecular analyses would be performed to confirm markers associated with the resistance and suitable for marker-assisted selection. Resistant RILs identified in the study could be efficiently used to improve the resistance to yellow rust in wheat.

The Impact of Deflection on the Sensing Response of Fiber Bragg Gratings Bonded to Graphene and PMMA Substrates

Younis Mohammed Salih,Mudhaffer Mustafa Ameen,Fahmi F. Muhammadsharif,Mohammad Fadhli Ahmad,Nor Aieni Haji Mokhtar,Ismael Mohammed Mohammed Saeed,Md. Nurul Islam Siddique,Ahmad Nazri Dagang,Salisa Abd 한국광학회 2020 Current Optics and Photonics Vol.4 No.2

The impact of graphene and poly(methyl methacrylate) (PMMA) substrates on the response of a fiber Bragg grating (FBG) due to mechanical deflection was investigated. For this purpose, four FBGs with grating lengths of 5, 15, 25, and 35.9 mm were utilized. Higher sensitivity was found for FBGs of larger grating length and for those bonded to graphene substrate. It was concluded that FBGs of smaller grating length (5 and 15 mm) were more sensitive in compression mode, while those of larger grating length (25 and 35.9 mm) were seen to be highly sensitive in tension mode.

Synthesis, Fastness and Spectral Properties of Some New Azo Pyrazole and Pyrazolotriazole Derivatives

Rizk, Hala F.,El-Badawi, Mahmoud A.,Ibrahim, Seham A.,El-Borai, Mohamed A. Korean Chemical Society 2010 대한화학회지 Vol.54 No.6

Coupling of 5-amino-1,3-diaryl-pyrazoles 1a-c with diazonium salts of different aryl amines gave a series of novel 1,3-diaryl-5-amino-4-arylazopyrazoles 3a-l. Such compounds could be also obtained by reaction of 5-amino-1,3-diaryl-4-nitroso- 1H-pyrazoles 2a-c with different aryl amines in alkaline medium. Oxidation of azo derivatives 3a-l with cupric acetate, in dimethyl formamide and stream of air, gave 2,4,6-triaryl-2,4-dihydropyrazolo [4,3-d]-1,2,3-triazoles 4a-l. and the fluorescence properties of the cyclic triazoles were studied. Diazotization of 5-amino-1,3-diaryl-1H-pyrazoles 1a-c by sodium nitrite in ortho-phosphoric acid followed by coupling with some aryl amines gave o-aminoazo compounds 5a-f. Cyclisation of compounds 5a-f in pyridine and cupric acetate gave the corresponding triazoles 6a-f. The coupling of compounds 6a-f with different aryl diazonium salts gave compounds 7a-j. The synthesized dyes were applied to polyesters as disperse dyes and the fastness properties were evaluated. 5-Amino-1,3-diaryl-pyrazoles 1a-c 와 다양한 aryl amine의diazonium salts를 반응시켜서 1,3-diaryl-5-amino-4-arylazopyrazoles 3a-l을 합성하였으며, 몇 가지 화합물은 5-amino-1,3-diaryl-4-nitroso-1H-pyrazoles 2a-c와 aryl amine의 diazonium salts를 반응시켜서 얻었다. 합성한 azo 유도체 화합물 3a-l을 DMF 용매 속에서 cupric acetate와 산화반응시켜서 2,4,6-triaryl-2,4-dihydropyrazolo [4,3-d]-1,2,3-triazoles 4a-l을 합성하였으며, 합성한 cyclic triazoles에 대한 형광 특성을 측정하였다. 한편, Diazotization of sodium nitrite/ortho-phosphoric acid 조건에서 5-amino-1,3-diaryl-1H-pyrazoles 1a-c를 diazotization화 반응시킨 다음에, aryl amines과 반응시켜서 o-aminoazo compounds 5a-f를 합성하였다. 합성한 화합물 5a-f를 pyridine/cupric acetate 반응 조건에서 반응시켜서 triazole 6a-f들을 합성하였으며, 얻어진 화합물 6a-f을 aryl diazonium salts과 반응시켜서 화합물 7a-j을 합성하였다. 합성한 염료 화합물을 polyesters에 분산염료와 정착성을 측정하였다.

Prophylactic tranexamic acid to reduce blood loss and related morbidities during hysterectomy: a systematic review and meta-analysis of randomized controlled trials

Ahmed Abu-Zaid,Saeed Baradwan,Ehab Badghish,Rayan AlSghan,Ahmed Ghazi,Bayan Albouq,Khalid Khadawardi,Nora F AlNaim,Latifa F AlNaim,Meshael Fodaneel,Fatimah Shakir Abualsaud,Mohammed Ziad Jamjoom,Abdul 대한산부인과학회 2022 Obstetrics & Gynecology Science Vol.65 No.5

To perform a systematic review and meta-analysis of all randomized controlled trials (RCTs) that evaluated the efficacyand safety of prophylactic tranexamic acid (TXA) versus a control (placebo or no treatment) during hysterectomy forbenign conditions. Six databases were screened from inception to January 23, 2022. Eligible studies were assessed forrisk of bias. Outcomes were summarized as weighted mean differences and risk ratios with 95% confidence intervalsin a random-effects model. Five studies, comprising six arms and 911 patients were included in the study. Two andthree studies had an overall unclear and low risk of bias, respectively. Estimated intraoperative blood loss, requirementfor postoperative blood transfusion, and requirement for intraoperative topical hemostatic agents were significantlyreduced in a prophylactic TXA group when compared with a control group. Moreover, postoperative hemoglobinlevel was significantly higher in the prophylactic TXA group than in the control group. Conversely, the frequencyof self-limiting nausea and vomiting was significantly higher in the prophylactic TXA group than in the control group. There were no significant differences between the groups in terms of surgery duration, hospital stay, and diarrhearate. All the RCTs reported no incidence of major adverse events in either group, such as mortality, thromboembolicevents, visual disturbances, or seizures. There was no publication bias for any outcome, and leave-one-out sensitivityanalyses demonstrated stability of the findings. Among patients who underwent hysterectomy for benign conditions,prophylactic TXA appeared largely safe and correlated with substantial reductions in estimated intraoperative bloodloss and related morbidities.

A supermolecular building approach for the design and construction of metal–organic frameworks

Guillerm, Vincent,Kim, Dongwook,Eubank, Jarrod F.,Luebke, Ryan,Liu, Xinfang,Adil, Karim,Lah, Myoung Soo,Eddaoudi, Mohamed The Royal Society of Chemistry 2014 Chemical Society reviews Vol.43 No.16

<P>In this review, we describe two recently implemented conceptual approaches facilitating the design and deliberate construction of metal–organic frameworks (MOFs), namely supermolecular building block (SBB) and supermolecular building layer (SBL) approaches. Our main objective is to offer an appropriate means to assist/aid chemists and material designers alike to rationally construct desired functional MOF materials, made-to-order MOFs. We introduce the concept of <B>net</B>-coded building units (<B>net</B>-cBUs), where precise embedded geometrical information codes uniquely and matchlessly a selected net, as a compelling route for the rational design of MOFs. This concept is based on employing pre-selected 0-periodic metal–organic polyhedra or 2-periodic metal–organic layers, SBBs or SBLs respectively, as a pathway to access the requisite <B>net</B>-cBUs. In this review, inspired by our success with the original <B>rht</B>-MOF, we extrapolated our strategy to other known MOFs <I>via</I> their deconstruction into more elaborate building units (namely polyhedra or layers) to (i) elucidate the unique relationship between edge-transitive polyhedra or layers and minimal edge-transitive 3-periodic nets, and (ii) illustrate the potential of the SBB and SBL approaches as a rational pathway for the design and construction of 3-periodic MOFs. Using this design strategy, we have also identified several new hypothetical MOFs which are synthetically targetable.</P> <P>Graphic Abstract</P><P>A toolbox for the design of made-to-order MOFs: Pinpointing the rationale and benefits of the Supermolecular Building Block (SBB) and Supermolecular Building Layer (SBL) approaches. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c4cs00135d'> </P>