Comparison Chosen DFT Methods with Six Basis Sets on Harmine Molecule

Malekzadeh, Maryam,Heshmati, Emran Korean Chemical Society 2013 대한화학회지 Vol.57 No.1

The effect of the DFT methods and basis sets on harmine molecule has been investigated. 26 DFT methods with 6 basis sets were used. Two main comparison chosen DFT methods in this work has been investigated. It is concluded that this contribution is very important and cannot be neglected. In the following analysis, changes in energy levels were investigated by two different methods. Considering a specific basis set, changes in energy levels were obtained using different DFT methods. A specific DFT method is chosen and changes in energy levels have been investigated by means of various basis sets. Effect of the choice of basis sets on geometrical parameters on harmine molecule has also been investigated.

A DQ nonlinear bending analysis of skew composite thin plates

Malekzadeh, P. Techno-Press 2007 Structural Engineering and Mechanics, An Int'l Jou Vol.25 No.2

A first endeavor is made to exploit the differential quadrature method (DQM) as a simple, accurate, and computationally efficient numerical tool for the large deformation analysis of thin laminated composite skew plates, which has very strong singularity at the obtuse vertex. The geometrical nonlinearity is modeled by using Green's strain and von Karman assumption. A recently developed DQ methodology is used to exactly implement the multiple boundary conditions at the edges of skew plates, which is a major draw back of conventional DQM. Using oblique coordinate system and the DQ methodology, a mapping-DQ discretization rule is developed to simultaneously transform and discretize the equilibrium equations and the related boundary conditions. The effects of skew angle, aspect ratio and different types of boundary conditions on the convergence and accuracy of the presented method are studied. Comparing the results with the available results from other numerical or analytical methods, it is shown that accurate results are obtained even when using only small number of grid points. Finally, numerical results for large deflection behavior of antisymmetric cross ply skew plates with different geometrical parameters and boundary conditions are presented.

An integrated approach for structural health monitoring using an in-house built fiber optic system and non-parametric data analysis

Malekzadeh, Masoud,Gul, Mustafa,Kwon, Il-Bum,Catbas, Necati Techno-Press 2014 Smart Structures and Systems, An International Jou Vol.14 No.5

Multivariate statistics based damage detection algorithms employed in conjunction with novel sensing technologies are attracting more attention for long term Structural Health Monitoring of civil infrastructure. In this study, two practical data driven methods are investigated utilizing strain data captured from a 4-span bridge model by Fiber Bragg Grating (FBG) sensors as part of a bridge health monitoring study. The most common and critical bridge damage scenarios were simulated on the representative bridge model equipped with FBG sensors. A high speed FBG interrogator system is developed by the authors to collect the strain responses under moving vehicle loads using FBG sensors. Two data driven methods, Moving Principal Component Analysis (MPCA) and Moving Cross Correlation Analysis (MCCA), are coded and implemented to handle and process the large amount of data. The efficiency of the SHM system with FBG sensors, MPCA and MCCA methods for detecting and localizing damage is explored with several experiments. Based on the findings presented in this paper, the MPCA and MCCA coupled with FBG sensors can be deemed to deliver promising results to detect both local and global damage implemented on the bridge structure.

No Response to Bidirectional Size-Based Selection in the Rotifer Brachionus rotundiformis

Malekzadeh-Viayeh, Reza,Song, Choon Bok The Korean Society of Fisheries and Aquatic Scienc 2015 Fisheries and Aquatic Sciences Vol.18 No.3

Although rotifers have been considered the best feeding option for several species of fishes in aquaculture, they are sometimes larger than appropriate for the early larval stage of some marine fishes. Thus, we aimed to determine whether size-based selection of the parents could affect the average body size of their progeny in two clonal populations of the rotifer Brachionus rotundiformis. From each of the clones, 20 individuals were bi-directionally selected toward both smaller and larger sizes and each individual-based selection was conducted for 10 consecutive generations. The results showed that although there were sometimes differences in mean body size between parents and their progeny, no directional trend was observed in all selected lines of both clones. We demonstrated that artificial selection in a rotifer stock cannot lead to an expected size range although they appear to exhibit a large degree of body size polymorphism.

Hydro-mechanical Behavior of Polypropylene Fiber Reinforced Expansive Soils

Mona Malekzadeh,Huriye Bilsel 대한토목학회 2014 KSCE JOURNAL OF CIVIL ENGINEERING Vol.18 No.7

This paper presents a series of laboratory tests and evaluates the effect of polypropylene fiber inclusion on volume change behavior and soil-water characteristics of expansive soils. Specimens were statically compacted at maximum Proctor dry density and optimum moisture content with 0%, 0.5% and 1% polypropylene fiber inclusions by dry weight of the soil, and their volume change behavior was studied through swell-shrinkage and consolidation tests. The soil-water characteristic behavior, which is the most significant aspect of soils, was also obtained by a series of matric suction measurements using filter paper technique. It was concluded that polypropylene fiber inclusion is very effective in reducing the compression and swell indices and swell pressures as well as one- dimensional swell amount in saturated condition. Upon desiccation, shrinkage of reinforced soil reduced considerably, as the shrinkage limit increased by more than 50%. Therefore, fiber reinforcement can effectively reduce swell-shrink movement of expansive soils.

Magnetic field effect on laminar heat transfer in a pipe for thermal entry region

Asadolah Malekzadeh,Amir Heydarinasab,Mohammad Jahangiri 대한기계학회 2011 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.25 No.4

The influence of a transverse magnetic field on the local heat transfer of an electrically-conducting laminar fluid flow with high Prandtl number through a pipe was studied experimentally. Experiments indicated an increase in the local Nusselt number. The coupled set of the equations of motion and the energy equation including the viscous and Joule dissipation terms becomes non-linear and is solved numerically using a finite difference scheme. Favorable comparisons with experimental results confirm the correctness of the numerical results. It is found that the influence of magnetic field can be diminished by reducing the angle between the flow direction and the direction of magnetic field. The wall temperature reduces as the value of Hartmann number increases and the reduction rate of the wall temperature decreases as the value of Hartmann number exceeds a certain value. The average Nusselt number asymptotically approaches its limit as the Hartmann number becomes larger. Also, curve fitting can be employed to derive an equation for the average Nusselt number as a function of the Hartmann number. This equation is similar to the Sieder-Tate equation. It is observed that increasing the Hartmann number has no considerable effect on the thermal boundary layer thickness but decreases the temperature of fluid layers inside the boundary layer.

Higher order free vibration of sandwich curved beams with a functionally graded core

K. Malekzadeh Fard 국제구조공학회 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.49 No.5

In this paper, free vibration of a sandwich curved beam with a functionally graded (FG) core was investigated. Closed-form formulations of two-dimensional (2D) refined higher order beam theory (RHOBT) without neglecting the amount of z/R was derived and used. The present RHOBT analysis incorporated a trapezoidal shape factor that arose due to the fact that stresses through the beam thickness were integrated over a curved surface. The solutions presented herein were compared with the available numerical and analytical solutions in the related literature and excellent agreement was obtained. Effects of some dimensionless parameters on the structural response were investigated to show their effects on fundamental natural frequency of the curved beam. In all the cases, variations of the material constant number were calculated and presented. Effect of changing ratio of core to beam thickness on the fundamental natural frequency depended on the amount of the material constant number.

Magnetic field effect on fluid flow characteristics in a pipe for laminar flow

Asadolah Malekzadeh,Amir Heydarinasab,Bahram Dabir 대한기계학회 2011 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.25 No.2

The influence of a magnetic field on the skin friction factor of steady fully-developed laminar flow through a pipe was studied experimentally. A mathematical model was introduced and a finite difference scheme used to solve the governing equations in terms of vorticity-stream function. The model predictions agree favourably with experimental results. It is observed that the pressure drop varies in proportion to the square of the product of the magnetic field and the sine of the magnetic field angle. Also, the pressure drop is proportional to the flow rate. This situation is similar to what applies in the absence of a magnetic field. It is found that a transverse magnetic field changes the axial velocity profile from the parabolic to a relatively flat shape. At first, the radial velocity rises more rapidly and then gradually decreases along the pipe until falling to zero. A numerical correlation can be written for the considerable distance required for the new axial velocity profile to establish. Owing to the changes taking place in the axial velocity profile, it exhibits a higher skin friction factor. The new axial velocity profile asymptotically approaches its limit as the Hartmann number becomes large.

New enhanced higher order free vibration analysis of thick truncated conical sandwich shells with flexible cores

Keramat Malekzadeh Fard,Mostafa Livani 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.55 No.4

This paper dealt the free vibration analysis of thick truncated conical composite sandwich shells with transversely flexible cores and simply supported boundary conditions based on a new improved and enhanced higher order sandwich shell theory. Geometries were used in the present work for the consideration of different radii curvatures of the face sheets and the core was unique. The coupled governing partial differential equations were derived by the Hamilton's principle. The in-plane circumferential and axial stresses of the core were considered in the new enhanced model. The first order shear deformation theory was used for the inner and outer composite face sheets and for the core, a polynomial description of the displacement fields was assumed based on the second Frostig’s model. The effects of types of boundary conditions, conical angles, length to radius ratio, core to shell thickness ratio and core radius to shell thickness ratio on the free vibration analysis of truncated conical composite sandwich shells were also studied. Numerical results are presented and compared with the latest results found in literature. Also, the results were validated with those derived by ABAQUS FE code.

Higher order impact analysis of sandwich panels with functionally graded flexible cores

K. Malekzadeh Fard 국제구조공학회 2014 Steel and Composite Structures, An International J Vol.16 No.4

This study deals with dynamic model of composite sandwich panels with functionally graded flexible cores under low velocity impacts of multiple large or small masses using a new improved higher order sandwich panel theory (IHSAPT). In-plane stresses were considered for the functionally graded core and face sheets. The formulation was based on the first order shear deformation theory for the composite face sheets and polynomial description of the displacement fields in the core that was based on the second Frostig's model. Fully dynamic effects of the functionally graded core and face-sheets were considered in this study. Impacts were assumed to occur simultaneously and normally over the top and/or bottom of the face-sheets with arbitrary different masses and initial velocities. The contact forces between the panel and impactors were treated as internal forces of the system. Nonlinear contact stiffness was linearized with a newly presented improved analytical method in this paper. The results were validated by comparing the analytical, numerical and experimental results published in the latest literature.