준접지형 집합주택단지의 사용자 행태조사 연구 : 천안 신부·수원 권선 주공아파트를 중심으로

金大燁,李正秀 湖西大學校工業技術硏究所 1999 工業技術硏究所論文集 Vol.18 No.-

This paper attempts to verify the characteristics of user's behavior in the semi-grounded housing estate. To achieve this purposes, semi grounded multi-family housing areas are surveyed in Cheon-An and Su-Weon, and followed by the P.O.E. using the questionnaires. The outcomes from this study are as follows : (1) The occupants who are dwell in semi-grounded housing estate have high desires toward the ground and the gardening. (2) To accomodate the outdoor behaviors of occupant, it is important to design as open-ended in semi-private area. (3) The design techniques as like a-room, high planting are need to prevent the privacy intrusions from the streets.

토끼의 간뇌에서 NPY 분비세포에 대한 면역조직화학적 연구

정주현,문정석,김종중,장인엽,정윤영,김흥중 조선대학교 1994 The Medical Journal of Chosun University Vol.19 No.2

The distributions of neuropeptide Y(NPY) in the diencephalon of the adult rabbit was investigated using indirect immunohistochemistry. The method showed that neuropeptide Y had a widespread distributions and was present in extremely high concentration in the hypothalamic nuclei of the rabbit. A few number of NPY-containing perikarya was found in the arcuate nucleus, paraventricular nucleus. medial to the fornix. Neuropeptide Y-immunoreactive axons and terminals in the hypothalamus were found in most hypothalamic nuclei. The highest concentrations of neuropeptide Y-containing fibers were found in the arcuate nucleus. paraventricular nucleus. and alao the supraoptic nucleus. dorsomedial hypothalamic nucleus. preoptic area showed relatively high concentration of neuropeptide Y-immunoreactive fibers. The extremely high concentations of neuropeptide Y in the bypothalamus indicate important role in many brain functions

Bone Healing Capacity of Demineralized Dentin Matrix Materials in a Mini-pig Cranium Defect

Kim, Jong-Yub,Kim, Kyung-Wook,Um, In-Woong,Kim, Young-Kyun,Lee, Jeong-Keun Korean Academy of Dental Science 2012 Journal of korean dental science Vol.5 No.1

Purpose: In this study the bone healing ability of autogenous tooth bone graft material as a substitute material was evaluated in a mini-pig cranial defect model through histologic examinations and osteonectin reverse transcription polymerase chain reaction (RT-PCR) quantitative analysis. Materials and Methods: A defect was generated in the cranium of mini-pigs and those without a defect were used as controls. In the experimental group, teeth extracted from the mini-pig were manufactured into autogenous tooth bone graft material and grafted to the defect. The mini-pigs were sacrificed at 4, 8, and 12 weeks to histologically evaluate bone healing ability and observe the osteonectin gene expression pattern with RT-PCR. Result: At 4 weeks, the inside of the bur hole showed fibrosis and there was no sign of bone formation in the control group. On the other hand, bone formation surrounding the tooth powder granule was observed at 4 weeks in the experimental group where the bur hole was filled with tooth powder. Osteonectin gene expression; there was nearly no osteonectin expression in the control group while active osteonectin expression was observed from 4 to 12 weeks in the experimental group. Conclusion: We believe this material will show better results when applied in a clinical setting.

A comparative study of dissolving hyaluronic acid microneedles with trehalose and poly(vinyl pyrrolidone) for efficient peptide drug delivery

Kim, Hong Kee,Lee, Soo Hyeon,Lee, Boo Yong,Kim, Sung Jin,Sung, Chang Yub,Jang, Na Keum,Kim, Jung Dong,Jeong, Do Hyeon,Ryu, Hyeon Yeol,Lee, Somin The Royal Society of Chemistry 2018 Biomaterials Science Vol.6 No.10

<P>We studied the role of the additives trehalose and poly(vinyl pyrrolidone) in the physical and pharmacokinetic properties of peptide drug incorporated hyaluronic acid microneedles. Poly(vinyl pyrrolidone) increases the mechanical strength of microneedles and ameliorates drug bioavailability <I>in vivo</I>, suggesting that poly(vinyl pyrrolidone) can be a promising additive in the fabrication of peptide drug-encapsulated fully dissolving microneedles.</P>

Magnesium phosphate ceramics incorporating a novel indene compound promote osteoblast differentiation <i>in vitro</i> and bone regeneration <i>in vivo</i>

Kim, Ju Ang,Yun, Hui-suk,Choi, Young-Ae,Kim, Jung-Eun,Choi, So-Young,Kwon, Tae-Geon,Kim, Young Kyung,Kwon, Tae-Yub,Bae, Myung Ae,Kim, Nak Jeong,Bae, Yong Chul,Shin, Hong-In,Park, Eui Kyun IPC Science and Technology Press 2018 Biomaterials Vol.157 No.-

<P><B>Abstract</B></P> <P>Incorporating bioactive molecules into synthetic ceramic scaffolds is challenging. In this study, to enhance bone regeneration, a magnesium phosphate (MgP) ceramic scaffold was incorporated with a novel indene compound, KR-34893. KR-34893 induced the deposition of minerals and expression of osteoblast marker genes in primary human bone marrow mesenchymal stem cells (BMSCs) and a mouse osteoblastic MC3T3-E1 cell line. Analysis of the mode of action showed that KR-34893 induced the phosphorylation of MAPK/extracellular signal-regulated kinase and extracellular signal-regulated kinase, and subsequently the expression of bone morphogenetic protein 7, accompanied by SMAD1/5/8 phosphorylation. Accordingly, KR-34893 was incorporated into an MgP scaffold prepared by 3D printing at room temperature, followed by cement reaction. KR-34893-incorporated MgP (KR-MgP) induced the expression of osteoblast differentiation marker genes <I>in vitro</I>. In a rat calvaria defect model, KR-MgP scaffolds enhanced bone regeneration and increased bone volume compared with MgP scaffolds, as assessed by micro-computed tomography and histological analyses. In conclusion, we developed a method for producing osteoinductive MgP scaffolds incorporating a bioactive organic compound, without high temperature sintering. The KR-MgP scaffolds enhanced osteoblast activation <I>in vitro</I> and bone regeneration <I>in vivo</I>.</P>

Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding

Kim, Da-Hye,Son, Jun-Sik,Jeong, Seong-Hwa,Kim, Young-Kyung,Kim, Kyo-Han,Kwon, Tae-Yub The Korean Academy of Prosthodonitics 2015 The Journal of Advanced Prosthodontics Vol.7 No.2

PURPOSE. This study aimed to investigate the efficacy of cleaning solutions on saliva-contaminated zirconia in comparison to air-abrasion in terms of resin bonding. MATERIALS AND METHODS. For saliva-contaminated air-abraded zirconia, seven cleaning methods)-no contamination (NC), water-spray rinsing (WS), additional air-abrasion (AA), and cleaning with four solutions (Ivoclean [IC]; 1.0 wt% sodium dodecyl sulfate [SDS], 1.0 wt% hydrogen peroxide [HP], and 1.0 wt% sodium hypochlorite [SHC])-were tested. The zirconia surfaces for each group were characterized using various analytical techniques. Three bonded resin (Panavia F 2.0) cylinders (bonding area: $4.5mm^2$) were made on one zirconia disk specimen using the Ultradent jig method [four disks (12 cylinders)/group; a total of 28 disks]. After 5,000 thermocycling, all specimens were subjected to a shear bond strength test with a crosshead speed of 1.0 mm/minute. The fractured surfaces were observed using an optical and scanning electron microscope (SEM). RESULTS. Contact angle measurements showed that groups NC, AA, IC, and SHC had hydrophilic surfaces. The X-ray photoelectron spectroscopy (XPS) analysis showed similar elemental distributions between group AA and groups IC and SHC. Groups IC and SHC showed statistically similar bond strengths to groups NC and AA (P>.05), but not groups SDS and HP (P<.05). For groups WS, SDS, and HP, blister-like bubble formations were observed on the surfaces under SEM. CONCLUSION. Within the limitations of this in vitro study, some of the cleaning solutions (IC or SHC) were effective in removing saliva contamination and enhancing the resin bond strength.

GC/NPD를 이용한 다성분 잔류농약의 동시분석

김우성,이선화,김상엽,정동윤,김재이,이영자,이홍재,정성욱,박흥재 한국환경과학회 2003 한국환경과학회지 Vol.12 No.10

Pesticides were extracted from samples with 70% acetone and methylene chloride in order, and then cleaned up via open-column chromatography apparatus packed with fiorisil, and finally analyzed simultaneously the organophosphorus pesticides using GC/NPD, Ultra-2 and Ultra-1 fused silica capillary columns were used to separate and identify the products. Recovery of most analytes from soybean sample, taken from pesticide residues well, was greater than(80%) for all except(6) analytes. This method can simultaneously determine multiple pesticides with a high degree of accuracy and precision.

Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks

Kim, Min-Jeong,Kim, Kyo-Han,Kim, Young-Kyung,Kwon, Tae-Yub The Korean Academy of Prosthodonitics 2013 The Journal of Advanced Prosthodontics Vol.5 No.4

PURPOSE. The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS. Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light transmittance of the disks was measured using ultraviolet visible near-infrared spectroscopy. Four different light-curing protocols were used by combining two curing light modes (Elipar TriLight (standard mode) and bluephase G2 (high power mode)) with light-exposure times of 40 and 120 seconds. The DCs of the two dual-cured resin cements (Duo-Link and Panavia F2.0) light-irradiated through the disks was analyzed at three time intervals (3, 7, and 10 minutes) by FTIR spectroscopy. The data was analyzed using repeated measures ANOVA (${\alpha}$=.05).Two-way ANOVA and Tukey post hoc test were used to analyze the 10 minute DC results. RESULTS. The 1.0 mm thick disk exhibited low light transmittance (<25%), and the transmittance decreased considerably with increasing disk thickness. All groups exhibited significantly higher 10 minute DC values than the 3 or 7 minute values (P<.05), but some exceptions were observed in Duo-Link. Two-way ANOVA revealed that the influence of the zirconia disk thickness on the 10 minute DC was dependent on the light-curing methods (P<.001). This finding was still valid even at 4.0 mm thickness, where substantial light attenuation took place. CONCLUSION. The curing of the dual-cured resin cements was affected significantly by the light-curing technique, even though the additional chemical polymerization mechanism worked effectively.

Establishment and characterization of a chordoma cell line from the tissue of a patient with dedifferentiated-type chordoma

Kim, Jeong-Yub,Lee, Jongsun,Koh, Jae-Soo,Park, Myung-Jin,Chang, Ung-Kyu Journal of Neurosurgery Publishing Group 2016 Journal of Neurosurgery: Spine Vol.25 No.5

<B>OBJECTIVE</B><P>Chordoma is a rare bone tumor of the axial skeleton believed to originate from the remnants of the embryonic notochord. The available tumor cells are characteristically physaliferous and express brachyury, a transcription factor critical for mesoderm specification. Although chordomas are histologically not malignant, treatments remain challenging because they are resistant to radiation therapy and because wide resection is impossible in most cases. Therefore, a better understanding of the biology of chordomas using established cell lines may lead to the advancement of effective treatment strategies. The authors undertook a study to obtain this insight.</P><B>METHODS</B><P>Chordoma cells were isolated from the tissue of a patient with dedifferentiated-type chordoma (DTC) that had recurred. Cells were cultured with DMEM/F12 containing 10% fetal bovine serum and antibiotics (penicillin and streptomycin). Cell proliferation rate was measured by MTS assay. Cell-cycle distribution and cell surface expression of proteins were analyzed by fluorescence-activated cell sorting (FACS) analysis. Expression of proteins was analyzed by Western blot and immunocytochemistry. Radiation resistance was measured by clonogenic survival assay. Tumor formation was examined by injection of chordoma cells at hindlimb of nude mice.</P><B>RESULTS</B><P>The putative (DTC) cells were polygonal and did not have the conventional physaliferous characteristic seen in the U-CH1 cell line. The DTC cells exhibited similar growth rate and cell-cycle distribution, but they exhibited higher clonogenic activity in soft agar than U-CH1 cells. The DTC cells expressed high levels of platelet-derived growth factor receptor-β and a low level of brachyury and cytokeratins; they showed higher expression of stemness-related and epithelial to mesenchymal transition-related proteins than the U-CH1 cells. Intriguingly, FACS analysis revealed that DTC cells exhibited marginal surface expression of CD24 and CD44 and high surface expression of CXCR4 in comparison to U-CH1 cells. In addition, blockade of CXCR4 with its antagonist AMD3100 effectively suppressed the growth of both cell lines. The DTC cells were more resistant to paclitaxel, cisplatin, etoposide, and ionizing radiation than the U-CH1 cells. Injection of DTC cells into the hindlimb region of nude mice resulted in the efficient formation of tumors, and the histology of xenograft tumors was very similar to that of the original patient tumor.</P><B>CONCLUSIONS</B><P>The use of the established DTC cells along with preestablished cell lines of chordoma may help bring about greater understanding of the mechanisms underlying the chordoma that will lead to therapeutic strategies targeting chordomas.</P>

The Effect of Distal Location of the Volar Short Arm Splint on the Metacarpophalangeal Joint Motion

Joon Yub Kim,Dong Wook Sohn,Ho Youn Park,Jeong Hyun Yoo,Joo Hak Kim,Myung Gon Jung,Jae Ho Cho 대한정형외과학회 2016 Clinics in Orthopedic Surgery Vol.8 No.2

Background: The goals of this study were to compare maximal metacarpophalangeal joint (MCPJ) flexion angles after application of a volar short arm splint at 3 different locations and verify the relations between the three different physical and radiological locations. Methods: Forty dominant hands of healthy subjects were analyzed in the study. We defined a transverse skin folding line as a line drawn from the radial aspect of the thenar crease to the ulnar aspect of the distal transverse palmar crease. The distal end of the volar short arm splint was applied on 3 parallel locations to this line. Location A was on this transverse skin folding line; location B was 1 cm proximal to location A; and location C was 1 cm distal to location A. Two orthopedic surgeons measured the maximal MCPJ flexion angles of each finger except the thumb with the application of a volar short arm splint at 3 different locations as well as without a splint as a control. Radiological locations of the 3 different distal ends of the volar short arm splint were also assessed by anteroposterior radiographs of the wrist. Results: When the splint was applied at location A and C, the maximal MCPJ flexion angle decreased to a mean of 83° (91% of control value) and 56° (62% of control value), respectively (compared to the control, p < 0.001). At location B, the maximal MCPJ flexion angle was a mean of 90° (99% of control value); no significant difference was observed compared to the control or without the splint (p = 0.103). On radiography, the average length from the metacarpal head to the distal end of the splint at all fingers decreased in the order of location B, A, and C (29 mm, 19 mm, and 10 mm, respectively; p < 0.001). Conclusions: We recommend applying the distal end of a volar short arm splint at proximal 1 cm to the transverse skin folding line to preserve MCPJ motion perfectly, which is located at distal 44% of the whole metacarpal bone length radiologically.