http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
육경창,신홍철,김완영 전북대학교 공업기술연구소 1987 工學硏究 Vol.18 No.-
New chelating resins containing phosphonyl group directly on polymer backbone and chelating resins containing some functional group like phosphonyl, amidoxime, or sulfonyl group were synthesized. Their adsorption capacity for uranyl ion was investigated with ICP-AES Generally, the adsorption capacity of amidoxime type chelating resin was better than that of phosphonyl type chelating resin. The effects of diluents (toluene and n-heptane) and crosslinking agent (DVB) on the adsorption capacity were examined. When using 10wt % of toluene as a diluent, the ad-sorption capacity reached the maximum value and the optimum concentration of DVB as a crosslinking agent for uranyl lon uptake was 7wt%
육경창,신대윤,신홍철,김완영 ( Gyeong Chang Yug,Dae Yewn Shin,Hong Chul Shin,Wan Young Kim ) 한국공업화학회 1992 공업화학 Vol.3 No.2
테레프탈산, 비페닐 디카르복시산과 히드로퀴논을 용액중합하여 전방향족 액정 폴리에스테르를 합성하고 테레프탈산과 비페닐 디카복시산의 몰비가 액정중합체의 열적성질, 열안정성 및 메소상의 구조에 미치는 영향을 DSC, TGA, 편광현미경 및 X선회절기로 조사하였다. 본 연구에서 합성한 중합체는 모두 열방성 액정중합체였고 네마틱 액정상을 나타내었으며, 용융온도 및 등방화온도는 중합체중의 비페닐렌구조가 증가함에 따라 약간씩 증가하였다. 또한 중합체의 열안정성은 중합체중의 비페닐렌구조가 증가함에 따라 개선되었으며, 비페닐렌구조를 가지는 중합체의 결정도는 상당히 높아서 약 33%정도로 나타났다. Aromatic liquid crystalline polyesters were synthesized from terephthalic acid(TPA), biphenyl dicarboxylic acid(BPA) and hydroquinone(HQ) by solution polymerization. Effects of TPA/BPA ratio(by mole %) on the theremal properties, thermal stability and textures of mesophases were investigated with DSC, TGA, cross-polarized microscopy and X-ray diffractometer. The synthesized polymers in this study were thermotropic and showed nematic textures. Melting temperature(T_m) and isotropization temperature (T_i) of polymer increased and thermal stabilities of polymer were improved with the content of BPA. Most of the polymers in this study had cystallinity more than 30%.
변형된 semi-EV 가황계를 적용한 NR/BR 블렌드의 특성에 관한 연구
김완영,김윤섭,육경창,신대윤 전북대학교 공업기술연구소 1991 工學硏究 Vol.22 No.-
Characteristics of NR/BR blend modified semi-EV(efficient vulcanization) cure system were investigated experimentally. It was found that, by stearic acid adding to semi-EV cure system, the scorch time in the vulcanization of rubber compound was delayed and the reversion resistance of the thermal aged rubber was improved. Comparing with conventional and semi-EV cure system, it is expected that modified semi-EV cure system may show a low rolling resistance with maintaining the similar physico-mechanical properties to them.
Hexamethoxymethylmelamine 이 고무 - 황동피복코드간의 접착에 미치는 영향
김완영,김윤섭,육경창,김형순,이정용,최상원 ( Wan Young Kim,Youn Sop Kim,Gyeong Chang Yug,Hyung Soon Kim,Jeong Yong Lee,Sang Won Choi ) 한국공업화학회 1992 공업화학 Vol.3 No.3
본 연구는 고무와 황동피복 코드간의 접착력 향상을 위하여 사용되는 resorcinol formaldehyde(RF) resin과 hexamethoxymethylmelamine(HMMM)이 고무 컴파운드내에서 나타내는 morphology와 접착특성에 대하여 고찰하였다. 가황후 resin은 구형의 형태로 시편 전체에 고르게 분포되어 있었고 그의 입경은 약 2000Å정도였다. 코드와 함께 가황시킨 시편에서 코드 주위에 존재하는 resin함락이 감소한 것으로 보아 resin이 코드쪽으로 이동이 있었던 것으로 생각된다. 또한 모듈러스는 methylene donor인 HMMM의 양이 많을수록 증가하였으며, 접착층이 더 두껍게 형성되었다. 접착력은 열노화에 의하여 상실되며 이는 대부분 초기에 발생함을 알 수 있었다. 접착컴파운드에서 가장 유리한 RF resin과 HMMM의 비는 물성, 접착층의 안정성, 열노화특성 등을 고려할 때 1 : 0.9이었다. The morphology and adhesion properties of rubber compounds containing resorcinol formaldehyde(RF) resin and hexamethoxymethylmelamine (HMMM) used in adhesion of rubber to brass-plated steel cord was investigated. The resins were spherical particles about 2000Å diameter and distributed in rubber compounds homogeneously, and the cured compound with steel cord showed migration of resin to steel cord. Also, modulus was increased with increasing HMMM contents. The loss of adhesion between rubber and steel cord was likely to be at initial stages by thermal aging. Considering the physical properties, stability of adhesion layer and thermal aging property, optimum ratio of RF resin and HMMM was 1 : 0.9.
Chitosan 에 대한 아크릴로니트릴의 광개시 그라프트 공중합
김완영,김종배,육경창,박선이 ( Wan Young Kim,Chong Bae Kim,Gyeong Chang Yug,Sun Ny Park ) 한국공업화학회 1992 공업화학 Vol.3 No.1
F^(3+)(FeCl_3·6H_2O)을 광증감제로 하여 Chitosan 필름에 아크릴로니트릴 단량체를 수용액상에서 자외선 조사하여 그라프트 공중합시켰다. 그라프트 공중합체의 확인은 IR 스펙트럼과 전자 현미경으로 행하였다. 단량체의 농도, 광증감제의 농도, 중합반응시간, 중합반응온도 등 여러 중합반응의 파라미터를 조사하였다. 단략체의 농도와 광증감제의 농도가 증가할수록 퍼센트 그라프팅은 증가하였으며 중합반응시간과 중합반응 온도가 증가하여도 퍼센트 그라프팅은 증가하였다. The graft copolymerization of acrylonitrile(AN) onto chitosan film by using Fe^(3+)(FeCl_3·6H_2O) as a photosensitizer in an aqueous medium was carried out under ultraviolet(UV) irradiation. The grafted copolymer was identified by using IR spectroscopy and scanning electron microscope. The effects of various polymerization parameters involving monomer concentration, photosensitizer concentration, polymerization time and polymerization temperature were investigated. As monomer concentration and photosensitizer concentration were increased, the percent grafting was increased up to limiting value. And also the percent grafting was found to increase by increasing the polymerization time and temperature.