http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Zhao, K.J.,Nagashima, Y.,Li, F.M.,Shi, Yuejiang,Diamond, P.H.,Dong, J.Q.,Itoh, K.,Itoh, S.-I.,Zhuang, G.,Liu, H.,Chen, Z.P.,Cheng, J.,Nie, L.,Ding, Y.H.,Hu, Q.M.,Chen, Z.Y.,Rao, B.,Cheng, Z.F.,Gao, L. IOP 2017 Nuclear fusion Vol.57 No.12
<P>The temporal-spatial structures of plasma flows and turbulence around tearing mode islands are presented. The experiments were performed using Langmuir probe arrays in the edge plasmas of J-TEXT tokamak. The correlation analyses clearly show that the flows have similar structures of <I>m</I>/<I>n</I> = 3/1 as the magnetic island does (<I>m</I> and <I>n</I> are the poloidal and toroidal mode numbers, respectively). The sign of the potential fluctuations for the flows inverses and the powers significantly reduce at <I>q</I> = 3 surface. Approaching to the last closed flux surface for the magnetic islands, the radially elongated flow structure forms. The flows are concentrated near separatrix and show quadrupole structures. The turbulence is concentrated near X-point and partly trapped inside the magnetic islands.</P>
Chih-Cheng Chen,Chang-Min Zhou,Hsing-I Hsiang 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.3
It is feasible to add homogeneously minute amounts (0.25 wt%) of Al₂O₃ into 3 mol% yttria stabilized tetragonal zirconia polycrystals using a co-precipitation procedure to produce precursory gel nano-powders. X-ray diffraction, scanning electron microscopy, high-angle annular dark-field-field emission gun transmission electron microscopy, relative density determination, shrinkage, and resistivity measurements using impedance spectroscopy were combined to elucidate the microstructure and sintering behavior of zirconia ceramics produced using 0.25 wt% added Al₂O₃, possibly the limit of solubility of Al₂O₃ in the ZrO₂ structure. Two modes of sintering behavior may be described as: (I) The total solid solution of Al₂O₃ in the solid solution of ZrO₂ structure via a precursory co-precipitation procedure; calcining at 800 oC and sintering at 1275 oC can be shown to indicate the viable solubility of Al₂O₃ in the ZrO₂ structure, designated as stage I of the thermal treatment; and (II) At the higher sintering temperature, above 1275 oC, the segregation of Al₂O₃ at triple junction occurs. Higher bulk and grain boundary resistivity values are found for the sample sintered at 1275 oC, which probably resulted from the dissolution of Al₂O₃ in the ZrO₂ structure. It is feasible to add homogeneously minute amounts (0.25 wt%) of Al₂O₃ into 3 mol% yttria stabilized tetragonal zirconia polycrystals using a co-precipitation procedure to produce precursory gel nano-powders. X-ray diffraction, scanning electron microscopy, high-angle annular dark-field-field emission gun transmission electron microscopy, relative density determination, shrinkage, and resistivity measurements using impedance spectroscopy were combined to elucidate the microstructure and sintering behavior of zirconia ceramics produced using 0.25 wt% added Al₂O₃, possibly the limit of solubility of Al₂O₃ in the ZrO₂ structure. Two modes of sintering behavior may be described as: (I) The total solid solution of Al₂O₃ in the solid solution of ZrO₂ structure via a precursory co-precipitation procedure; calcining at 800 oC and sintering at 1275 oC can be shown to indicate the viable solubility of Al₂O₃ in the ZrO₂ structure, designated as stage I of the thermal treatment; and (II) At the higher sintering temperature, above 1275 oC, the segregation of Al₂O₃ at triple junction occurs. Higher bulk and grain boundary resistivity values are found for the sample sintered at 1275 oC, which probably resulted from the dissolution of Al₂O₃ in the ZrO₂ structure.
The back contact modification in high-efficiency Cu₂ZnSn(S,Se)₄ solar cells by a thin MoO₃ layer
Septia KHOLIMATUSSADIAH,Cheng-Ying CHEN,Wei-Chao CHEN,Yi-Rung LIN,Shao-Hung LU,Meng-Chia HSIEH,Jan-Kai CHANG,Chih-I WU,Ruei-San CHEN,Kuei-Hsien CHEN,Li-Chyong CHEN 한국진공학회 2016 한국진공학회 학술발표회초록집 Vol.2016 No.8
Radiative decay of theψ(2S)into two pseudoscalar mesons
Bai, J. Z.,Ban, Y.,Bian, J. G.,Blum, I.,Chen, A. D.,Chen, G. P.,Chen, H. F.,Chen, H. S.,Chen, J.,Chen, J. C.,Chen, X. D.,Chen, Y.,Chen, Y. B.,Cheng, B. S.,Choi, J. B.,Cui, X. Z.,Ding, H. L.,Dong, L. Y American Physical Society 2003 Physical review. D, Particles and fields Vol.67 No.3
Preparation and characterization of Y-TZP powders coated with alumina
Chih-Cheng Chen,Shu-Wei Hsu,Hsing-I Hsiang 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.2
In this study, alumina was coated onto yttria tetragonally stabilized zirconia (Y-TZP)core powder using aluminum nitrate with urea in an aqueous solution. Boehmite coating onto the surface of Y-TZP powders was confirmed using transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy and zeta potential measurements. The sintering behaviors of Y-TZP powders with and without an alumina coating were investigated using a dilatometer and scanning electron microscopy (SEM). Boehmite coating onto the surface of Y-TZP powders significantly improved the densification of the resulting ceramic bodies. The relative density of the Y-TZP with a boehmite coating sintered at 1350oC can reach 97.3%. In this study, alumina was coated onto yttria tetragonally stabilized zirconia (Y-TZP)core powder using aluminum nitrate with urea in an aqueous solution. Boehmite coating onto the surface of Y-TZP powders was confirmed using transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy and zeta potential measurements. The sintering behaviors of Y-TZP powders with and without an alumina coating were investigated using a dilatometer and scanning electron microscopy (SEM). Boehmite coating onto the surface of Y-TZP powders significantly improved the densification of the resulting ceramic bodies. The relative density of the Y-TZP with a boehmite coating sintered at 1350oC can reach 97.3%.
Chih-Cheng Chen,Hsing-I Hsiang,Fu-Su Yen 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.1
In this study, the effects of aging on the crystalline phases, crystallite sizes and sintering properties of coprecipitated Al₂O₃- ZrO₂ powders are investigated using thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffractometry (XRD), dilatometry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Coprecipitated Al₂O₃- ZrO₂ powder aging in the solution promoted the dissolution and reprecipitation process, which resulted in the boehmite structure subsequently transforming into bayerite. The densification and microstructural development of the coprecipitated Al₂O₃-ZrO₂ powders were dependent upon the aging time which shifted the θ→α-Al₂O₃ phase transformation to a higher temperature, lowered the crystallite growth rate, and prevented the occurrence of intragranular ZrO₂ particles during sintering. In this study, the effects of aging on the crystalline phases, crystallite sizes and sintering properties of coprecipitated Al₂O₃- ZrO₂ powders are investigated using thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffractometry (XRD), dilatometry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Coprecipitated Al₂O₃- ZrO₂ powder aging in the solution promoted the dissolution and reprecipitation process, which resulted in the boehmite structure subsequently transforming into bayerite. The densification and microstructural development of the coprecipitated Al₂O₃-ZrO₂ powders were dependent upon the aging time which shifted the θ→α-Al₂O₃ phase transformation to a higher temperature, lowered the crystallite growth rate, and prevented the occurrence of intragranular ZrO₂ particles during sintering.
( Shih Rong Kuo ),( Hsin-i Chang ),( Cheng-nan Chen ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1
Black garlic has been reported to show multiple bioactivities against the development of different diseases. In this study, we investigated the hepatoprotective effect of black garlic on injured liver cells. Rat clone-9 hepatocytes were used for all the experiments. We used tert-Butyl hydroperoxide (tBHP) to induce injury of rat clone-9 hepatocytes. The contents of malondialdehyde (MDA) and glutathione (GSH), antioxidative enzyme activities of catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx), and mRNA expressions of IL-6 and IL-8 in rat clone-9 hepatocytes were determined to evaluate the level of cell damage. We found that black garlic extracts significantly recovered tBHP-induced cell death of rat clone-9 hepatocytes. Pretreatment with black garlic extracts antagonized GSH depletion, tBHP-increased MDA accumulation, IL-6/IL-8 mRNA expressions, and tBHP-decreased antioxidative enzyme activities. Moreover, we further found that JNK signaling regulated black-garlic-inhibited tBHP effects in rat clone-9 hepatocytes. Our findings demonstrate that black garlic has great hepatoprotective potential to block tBHP-damaged effects on cell death, lipid peroxidation, oxidative stress, and inflammation in rat clone-9 hepatocytes. Thus, this study suggests that black garlic may be an excellent natural candidate in the development of adjuvant therapy and healthy foods for liver protection.