http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Manickam Sundaram,Balasubramanian Visvalingam 대한용접·접합학회 2016 대한용접·접합학회지 Vol.34 No.3
This paper discusses the optimization of friction stir spot welding (FSSW) process parameters for joining Aluminum alloy (AA6061-T6) with Magnesium alloy (AZ31B) sheets. Prior to optimization an empirical relationship was developed to predict the Tensile Shear Fracture Load (TSFL) incorporating the four most important FSSW parameters, i.e., tool rotational speed, plunge rate, dwell time and tool diameter ratio, using response surface methodology (RSM). The experiments were conducted based on four factor, five levels central composite rotatable design (CCD) matrix. The maximum TSFL obtained was 3.61kN, with the tool rotation of 1000 rpm, plunge rate of 16 mm/min, dwell time of 5 sec and tool diameter ratio of 2.5.
Govindaraj Magudeeswaran,Visvalingam Balasubramanian,S.Sathyanarayanan,A. Moitra,S. Venugopal,Gankidi Madhusudhan Reddy,G. Sasikala 대한금속·재료학회 2009 METALS AND MATERIALS International Vol.15 No.6
Austenitic stainless steel, low hydrogen ferritic steel and high nickel steel consumables are used for the welding of armor-grade quenched and tempered (Q&T) steels. The use of such consumables in the welding of armorgrade Q&T steel leads to the formation of distinct microstructures in the respective welds and has a major influence on the dynamic fracture toughness. Hence, this paper examines how shielded metal arc welding consumables affect the dynamic fracture toughness (J1d) of armor-grade Q&T steel joints. The J1d values of joints fabricated with high nickel steel joints are superior than all other joints. Austenitic stainless steel, low hydrogen ferritic steel and high nickel steel consumables are used for the welding of armor-grade quenched and tempered (Q&T) steels. The use of such consumables in the welding of armorgrade Q&T steel leads to the formation of distinct microstructures in the respective welds and has a major influence on the dynamic fracture toughness. Hence, this paper examines how shielded metal arc welding consumables affect the dynamic fracture toughness (J1d) of armor-grade Q&T steel joints. The J1d values of joints fabricated with high nickel steel joints are superior than all other joints.
Sundaram, Manickam,Visvalingam, Balasubramanian The Korean Welding and Joining Society 2016 대한용접·접합학회지 Vol.34 No.3
This paper discusses the optimization of friction stir spot welding (FSSW) process parameters for joining Aluminum alloy (AA6061-T6) with Magnesium alloy (AZ31B) sheets. Prior to optimization an empirical relationship was developed to predict the Tensile Shear Fracture Load (TSFL) incorporating the four most important FSSW parameters, i.e., tool rotational speed, plunge rate, dwell time and tool diameter ratio, using response surface methodology (RSM). The experiments were conducted based on four factor, five levels central composite rotatable design (CCD) matrix. The maximum TSFL obtained was 3.61kN, with the tool rotation of 1000 rpm, plunge rate of 16 mm/min, dwell time of 5 sec and tool diameter ratio of 2.5.