http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
승강장 공기의 유입을 통한 지하철 객차내의 공기질 개선을 위한 실험적 연구
이재효(Jai-Hyo Lee),엄철준(Cheol-Jun Um),홍승찬(Seung-Chan Hong),김영모(Young-Mo Kim),주기가(Zhou Qike),윤건중(Keon-Joong Yoon) 대한설비공학회 2011 대한설비공학회 학술발표대회논문집 Vol.2011 No.7
서울의 대중교통수단인 지하철에 대해 공기질 개선을 위한 여러 사업들이 진행되어왔다. 특히 역사내의 공기질을 개선하기 위해 승강장에 스크린도어를 설치하여 승강장 및 대합실에서의 공기질은 많이 개선되었다. 또 하나의 승객들이 오래동안 머무르는 공간인 객차내의 공기질 개선도 과제로 되어 있다. 그러나 터널내를 달리는 기차에 대해 개선하는 방법은 제한되어 있다. 여기서는 객차내의 공기질중 문제가 되는 것이 무엇인지를 파악하고, PSD 후의 개선된 승강장 공기를 지하철이 역사에 서 있는 시간동안 객차내의 송풍기를 조작하여 객실내로 유입하게하여 공기질이 개선되는가를 실험하였다. 실험결과로는 객차내에서 PM₁? 은 환경기준치 150 ㎍/㎥ 이하로 나타났다. 그러나 CO₂ 농도가 객실내 배기 fan 을 작동시키지 않은 경우 아침 러시 아워에는 2800 ppm 까지 상승하나 개선된 방법으로 실험하면 24%가 감소된 2200 ppm 으로 낮아지는 것을 보여주고 있다. 이론적인 계산으로는 역 2030 ppm 정도가 나오나 이는 유입공기의 CO₂ 농도를 400 ppm 으로 가정하여 계산되었고 실제로 러시아워에는 600~700 ppm 을 보여주고 있어 실험과 이론 계산은 어느 정도 일치하는 결과를 보이고 있다 따라서 이 결과를 기초로 배기 fan의 용량을 기존 용량의 2배 정도로 키우면 최고 농도를 1750 ppm 정도로 조절할 수 있을 것이다.
R2R 공정에서 적외선가열과 열풍을 혼합한 건조방식에서 전도성 금속 잉크의 건조 및 큐어링 공정 특성에 관한 실험적 연구
김영모,홍승찬,이재효,Kim, Young-Mo,Hong, Seung-Chan,Lee, Jai-Hyo 한국반도체디스플레이기술학회 2010 반도체디스플레이기술학회지 Vol.9 No.2
This research is about the drying and curing characteristic of conductivity metallic ink on-line curing device in order to improve the curing time for productivity in RFID Gravure printing. The curing process is carried out to increase the electric conductivity after the metallic ink is printed on the substrate. The metal ink is composed of nano-sized silver or copper particles. In this research, the combined IR and Hot air curing system is used and its results is compared with those of oven, IR and Hot Air type respectively. Generally the curing time in the past is about 3 minutes. But the combined system (IR+Hot Air) in this research shows that curing time is less than 30 seconds. These results is much faster than those of other system. This study can be help to make Roll-to-Roll drying and curing process for mass and continuous production on-line.
적외선 건조 및 열풍 건조에 대한 전도성 잉크의 건조 특성에 관한 연구
정길용(Gil-Yong Jung),이재효(Jai-Hyo Lee),홍승찬(Seung-Chan Hong) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
RFID method is a non-contact automatic identification technology, which attaches microchips and antennas to an object in a tag form, to send and process information sent to the network using wireless frequency. Drying and curing process is extremely important which minimizes the resistivity of RFID antennas. This research is about the drying characteristic of conductivity ink, and analyzes and compares the hot-air drying process and infrared drying process. Also, the research was done for the improvement in drying performance by using combined process of hot-air and infrared mechanism. The experiment result shows that the hot-air or infrared drying system used alone cannot meet the required performance in drying printing method using conductivity ink. The combined drying system of hot-air and infrared ray showed resistance low enough in short drying and curing time, and this mechanism makes drying and curing process for mass and continuous production possible on-line.