http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
두경부암 세기변조방사선치료 계획 시 선량율 변화가 이하선에 미치는 영향
홍주완,정윤주,원희수,장남준,최지훈,석진용,Hong, Joo-Wan,Jeong, Yun-Ju,Won, Hui-Su,Chang, Nam-Jun,Choi, Ji-Hun,Seok, Jin-Yong 대한방사선치료학회 2010 대한방사선치료학회지 Vol.22 No.2
Purpose: There are various beam parameter in intensity modulated radiation therapy (IMRT). The aim of this study is to investigate how various dose rate affect the parotid in treatment plan of IMRT. Materials and Methods: The study was performed on 10 nasopharyngeal carcinoma patients who have undergone IMRT. CT images were scanned 3 mm of thickness in the same condition and the treatment plan was performed by Eclipse (Ver.7.1, Varian, Palo Alto, USA). The parameters for planning used 6 MV energy and 8 beams under the same dose volume constraint. The variation of dose rates were used 300, 400, 500 MU/min. The mean dose of both parotid was accessed from the calculated planning among the 10 patients. The mean dose of parotid was verificated by 2D diode array (Mapcheck from Sun Nuclear Corporation, Melbourne, Florida). Also, Total monitor unit (MU) and beam-on time was analysed. Results: According to the dose rate, the mean dose of parotid was increased by 0.8%, 2.0% each, when dose rate was changed from 300 MU/min to 400, 500 MU/min, moreover Total MU was increased by 5.4% and 10.6% each. There was also a dose upward trend in the dose measurement of parotid by 2D diode array. However, beam - on time difference of 1~2 minutes was no signigicant in the dose rate increases. Conclusion: From this study, when the dose rates increase, there was a signigicant increase of Total MU and the parotid dose accordingly, however the shortened treatment time was not significant. Hence, it is considered that there is a significant decrease of late side effect in parotid radiation therapy, if the precise dose rate in IMRT is used.
MDCT에서 ACR 팬텀의 구성 물질에 따른 공간분해능 연구
금웅진(Woong-Jin Keum),김무건(Moo-geon Kim),홍주완(Ju-Wan Hong),김영균(Yung-Kyoon Kim) 대한CT영상기술학회 2022 대한CT영상기술학회지 Vol.24 No.2
CT는 임상 진단에 사용되는 영상 장치로서 고해상도의 영상 획득을 기반으로 하며, 이를 위한 주기적인 정도관리는 반드시 시행되어야 한다. 본 연구에서는 구성물질과 매개변수를 변경하여 MTF를 비교 분석하였다. 구성 물질을 변경하여 MTF를 측정한 결과, CT 감쇄계수가 가장 높은 물질인 Bone과 가장 낮은 물질인 Air 사이에는 0.030 lp/cm의 차이가 나타났다. 절편두께 비교에서는 1.25 mm에서 0.110 lp/cm 나타났고, 10.0 mm의 MTF는 0.065 lp/cm로 최소치를 보였다. Bone 알고리즘과 Standard 알고리즘은 50.31%의 차이가 있었으며 Soft 알고리즘은 이보다 24.69% 감소된 수치로 나타났다. 선형 보간법의 비교에서는 Full (360°) 모드는 Plus (540°) 모드보다 10.71% 상승된 측정치가 나타났다. CT 정도관리 시 공간분해능을 정확히 측정하기 위하여 구성 물질을 다양화한 모듈이 필요하며, 진단 목적에 맞는 스캔 인자를 적용시킨다면 병변의 크기와 형태를 파악한 최적의 영상을 획득하는 방안이 될 것이다. The modulation transfer function (MTF) is well known as a crucial parameter in quality assurance of computed tomography (CT) scanners that provides detailed information of both contrast and resolution of CT images. In this study, modulation transfer function (MTF) of multi-detector computed tomography (MDCT) was evaluated by changing the substance of phantom and the measurement parameters. The analysis of MTF gives following results: 1) Bone (the highest contrast material) and air (the lowest contrast material) exhibited variance by 0.030 lp/cm at MTF(50%). 2) In addition, slice thickness of 1.25-mm and 10.0-mm exhibited 0.110 lp/cm and 0.065 lp/cm at MTF(50%), respectively. 3) MTF (50%) showed 50.31% difference depending on the image reconstruction algorithm. Especially, bone algorithm showed higher MTF (50%) than standard algorithm by 26.69%. 4) In addition, the Full (360°) mode linear interpolation showed higher MTF (50%) than the Plus (540°) mode by 10.71%. For a accurate measurement of MTF while performing CT quality control, a phantom module which consists of diverse substance is required. Also, the optimal image which reflecting the size and shape of lesion can be obtained with a suitable scanning factor for diagnosis.
주방 미세먼지 측정과 환경 맞춤형 주방 후드 자동 제어 시스템
문유빈 ( You-bin Moon ),이서우 ( Seo-woo Lee ),전준상 ( Jun-sang Jeon ),홍주완 ( Ju-wan Hong ) 한국정보처리학회 2020 한국정보처리학회 학술대회논문집 Vol.27 No.2
최근 미세먼지에 관한 관심이 점점 커지고 있다. 이러한 미세먼지 중 우리가 가장 쉽게 접하는 종류에는 요리 진행 시 발생하는 미세먼지가 있다. 이에 본 논문에서는 사용자의 수동적인 작동이 필요하지 않고, 요리 여부와 미세먼지 농도 정도를 파악하여 자동으로 주방 후드를 제어하는 모듈을 구성하여 많은 사람이 미세먼지의 위험 없이 주방을 이용할 수 있도록 하고자 한다.
문유빈 ( Yu-bin Moon ),오유민 ( Yu-min Oh ),이서우 ( Seo-woo Lee ),전준상 ( Jun-sang Jeon ),홍주완 ( Ju-wan Hong ) 한국정보처리학회 2021 한국정보처리학회 학술대회논문집 Vol.28 No.2
최근 서빙 로봇과 AGV(Auto Guided Vehicle) 등 다양한 산업 분야의 무인으로 동작하는 수단에 대한 관심이 점점 커지고 있다. 이러한 수단이 요구되는 곳 중 하나는 공항이다. 이에 본 논문에서는 사용자의 뒤를 따라다니거나 목표 지점으로 사용자를 안내하며 무게 측정 기능을 통해 사용자의 짐의 도난을 방지하고, 사용 이후 자동으로 복귀하는 스마트 캐리어를 구성하여 많은 사람이 공항을 편리하게 이용하고자 한다.