http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Al / TiO₂ - SiO₂ / Mo 구조를 가진 Antifuse의 전기적 특성 분석
홍성훈(Sunghun Hong),노용한(Yonghan Roh),배근학(Geunhag Bae),정동근(Donggeun Jung) 한국진공학회(ASCT) 2000 Applied Science and Convergence Technology Vol.9 No.3
본 논문에서는 낮은 구동 전압에서 동작하고 안정된 on/off 상태를 갖는 Al/TiO₂-SiO₂/Mo 형태의 안티퓨즈를 제작하였다. 하부전극으로 사용된 Mo 금속은 표면상태가 부드럽고 녹는점이 높은 매우 안정된 금속으로, 표면 위에 제조된 SiO₂의 특성을 매우 안정되게 유지시켰다 또한 TiO₂ 절연막을 SiO₂ 절연막 위에 복층 구조로 증착하여, Ti 금속의 침투로 인한 SiO₂ 절연막의 약화로 동일 두께(100 Å)의 SiO₂ 단일막에 비하여 향상된 절연파괴 전압을 얻을 수 있었다. TiO₂-SiO₂ 이중 절연막을 사용하여 적정 철연파괴전압 및 ON-저항을 구현하였으며, 두께가 두꺼워짐으로 인해 바닥금속의 거칠기의 영향을 최소화시킬 수 있었다. 이중 절연막의 두께는 250 Å이고 프로그래밍 전압은 9.0V이고 약 65Ω의 on 저항을 얻을 수 있었다. This paper is focused on the fabrication of reliable Al/TiO₂-SiO₂/Mo antifuse, which could operate at low voltage along with the improvement in on/off state properties. Mo metal as the bottom electrode had smooth surface and high melting point, and was being kept as-deposited SiO₂ film stable. The breakdown voltage of TiO₂-SiO₂ stacked antifuse was better than that of same-thickness (100 Å) SiO₂ antifuse because of Ti diffusion in SiO₂. The improving breakdown-voltage and on-resistance can be obtained as well as the influence of hillock in the bottom metal is reduced by using double insulator. Low on-resistance (65 Ω) and low programming voltage (9.0V) can be obtained in these antifuses with 250 Å double insulator.